Friends;
Coincidentally I had to replace a Fronius IG2000 on one of my own installs
today. It was refreshing experience for two reasons: 1. I think it is
the only install where I had not previously replaced the inverter (although
I could be wrong) and 2. I always installed a DC disconnect
Wrenches,
This is a request for a colleague. Anybody have suggestions where I could
access a consumption limiting kWh meter with the following characteristics?
120VAC 30A
Displays accumulated wattage and turns off power access at a preset point.
Resettable after 24 hours.
It is for a
Hello,
I visited a site on Friday to do some trouble-shooting on a system and noticed
the battery box was homemade by the installer of the system. Made from lumber.
Seems to me like there may be some safety and liability issues with a
homemade/lumber battery box. Maybe I'm getting gun shy
Jesse,
We have made many battery boxes for flooded batteries of wood,
although not "lumber". Years ago I made them, as I had been a
carpenter in a previous life, but then I found a woodworker who
could build to suit. We have long used "Baltic Birch" cabinet
Ron et al-The firmware in the controller sounds likely, but a faulty shorted bypass diode does not. Isn't that what bypass diodes are supposed to do-- turn on and short (bypass) a shaded row of cells?We use to see this half-panel voltage as a failure mode with the old Kyocera 120's when they were
5 matches
Mail list logo
