so it looks like a shielded 5 conductor control bundle might work?
Bill
Feather River Solar Electric
On 8/29/2016 1:42 PM, Matt Partymiller wrote:
August,
I am not answering your question but SMA tech support folk have
specifically told me that putting our 600V jacketed control wire in the
Wrenches,
What a delight it is when a client is so fully able to understand and
follow directions! Albert, the homeowner of the 1997 system with 16 BP
75W modules on a tracker, sent the results below. In short, he isolated
each string and measured input and output voltage and current as shown
HI All,
I wanted to follow up that Grundfos does indeed have pump efficiency curves for
the SQ pump.
I was able to get copies from my main pump supplier, Preferred Pump.
Grundfos seems to hold them pretty close and they are not generally available.
I have a few of them, so let me know and
August,
I am not answering your question but SMA tech support folk have
specifically told me that putting our 600V jacketed control wire in the
same EMT as the DC strings is leading to false arc fault trips.
Matt
On Mon, August 29, 2016 3:42 pm, August Goers wrote:
> Hi Wrenches,
>
>
>
>
> I’m
Hi Wrenches,
I’m preparing for 2014 NEC 690.12 Rapid Shutdown to hit in California
January 2017. Specifically, I’m trying to determine what to do for new
string inverter based installations. I’m assuming that microinverter, AC
modules, and systems with power-level electronics (SolarEdge etc)
Hi Dana
If you are in a lightning prone area surge protection is a must.
OutBack has a surge protection device that mounts directly on the inverter (see
the link below).
http://www.outbackpower.com/downloads/documents/Hardware_Accessories/flexware_surge_protector/fw_sp_specsheet_english.pdf
Steven,
Although you are correct that OSHA certifies NRTLs for specific test standards,
I have not run into jurisdictions in California that reject products listed to
UL standards by ETL, TUV, and CSA. There have been specific cases where the
County and City of LA have questioned various
Hi Daryl,
You might check out S-5 VersaBrackets and RibBrackets:
http://www.s-5.com/clamps/index_71.cfm
http://www.s-5.com/clamps/ribbracket/index_5336.cfm
-August
-Original Message-
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of
Just to expand on this, the NRTL has to test to the specific UL standard.
However, if you look at the definition of "listed" in the NEC, it states
"equipment, materials, or services included in a list published by an
organization that is acceptable to the AHJ...). I have heard of some
Nick,
Yes, there would be some direct sun exposure midday as well.
Benn Kilburn
SkyFire Energy Inc.
780-906-7807
> On Aug 28, 2016, at 10:27 PM, Nick Soleil wrote:
>
> Hi Wrenches.
>
>
> Yes, our product is NEMA 6, so is pretty robust once the DC and AC cables
Bill and Jay,
I didn't hear it from Enphase directly myself, otherwise I would have called
BS.
Around here, if they are on a north facing wall with no obstructions to the
east or west then they would get some direct sun early and late in the day, for
maybe a month or so in the summer. Hardly
On 8/28/2016 9:14 AM, Jeremy Rodriguez wrote:
Do you if the wiring from the E panel will reach with the AC conduit
box in place on the FX?
Jeremy Rodriguez
Solar Installation And Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Can't remember 100% but the conduit box has
Hi Wrenches.
Yes, our product is NEMA 6, so is pretty robust once the DC and AC cables are
connected. That said, our M215 Installation and Operation Manual states that
the microinverters should not be installed in a location that allows for "long
term exposure to direct sunlight." The
13 matches
Mail list logo