Hello
Can you recommend a distributor for a Radian inverter bypass kit?
Our usual no longer sells.What?
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand.
Same. We've started calling our initial $100k+ proposals the 'kiss of
Death' since we tend to never hear from them again. It's a good way to weed
out those who aren't willing to spend the time/capital on a system that
will actually perform what they're asking (reliably!).
On Fri, Sep 6, 2019 at
Here in Colorado, I've been called upon to do a few design bids for
these. I always charge a healthy design fee to eliminate the tire
kickers. You can spend quite a bit of time just characterizing the
loads, only to lose the client when they find out its going to be
several hundred thousand
Hi Andrew,
Any phrase that includes “per hour” while describing power use, generation or
storage in a RE system is probably a misnomer. Think about it: you could just
as well say 25kW per second or per month. That’s because kW is a term that
describes a rate or power, not a quantity of energy
Yeah these are for industrial cannabis operations that are starting to spring
up due to legalization..36” industrial greenhouse fans, pre vegetation
lighting, supplemental light and dehumidifiers… why they still want to do it in
the middle of the boonies with now power is beyond me..
Andrew
Allan,
I believe the original Mate is still available. At least my distributor
still has them in stock.
Kent Osterberg
Blue Mountain Solar
On 9/5/2019 8:01 PM, Sindelar Solar wrote:
Wrenches,
I have a customer with a 2005-era Outback VFX3648-based off grid
residential system. Her
Last time I looked, victron was not UL and you needed 2 of them for
split phase. Am I wrong?
Dave Angelini Offgrid Solar
"we go where
powerlines don't"
http://members.sti.net/offgridsolar/ [1]
e-mail
offgridso...@sti.net [2]
text 209 813 0060
On Fri, 6 Sep 2019 07:17:32
-0400, Tump wrote:
Victron has 10kW/120/100A pass thru, inverters and do your self a favor, buy
individual 2 volt batteries. Cells DO GO BAD and replacing a cell in a HUPs
battery is a CF. AND they really are a pain to install.
> On Sep 5, 2019, at 10:50 PM, David Katz wrote:
>
> The sentence “25KW per hour“
Hello Wrenches,
You may be aware of this but the -92R firmware supposedly has addressed the
arc fault issue for the US-40 inverters. See here for the download:
https://www.sma-america.com/service-support/downloads.html It fixed an arc
fault issue for me yesterday at least. Bring a thumb drive,
9 matches
Mail list logo
