Re: [RE-wrenches] Sol-Ark Gen Exercise Cycle

Hi folks--We've also been disappointed with the Sol-Ark two-wire generator start. The unit starts at the charge set point, but the inverter will shut down for about a minute every time the generator stops running. After the minute wait, the inverter restarts and everything is fine. But it is agg

Re: [RE-wrenches] Sol-Ark Gen Exercise Cycle

Thanks for the suggestion, Jay. Yes, the Sol-Ark has a very basic and limited AGS for 2 wire compatible gen sets. Gen start can be programmed with voltage or SOC, however gen stop is not a function that can not be readily programmed. Instead, the Sol-Ark is programmed to charge the battery bank to

Re: [RE-wrenches] Sunpower monitoring site

Hi David and Matt! Which monitoring platform are you struggling with? There is a legacy platform that is set to be retired at the end of the year – the one we called “SMS” which had the old orange and black theme. It’s being replaced with SunPower Pro Fleet Management, which is available to our

Re: [RE-wrenches] Outback MX-60 replacement fan

Allan, Zonna Energy stocks most Outback parts. John Blittersdorf CV Wind Service On Wed, Nov 11, 2020 at 6:10 PM Sindelar Solar wrote: > Esteemed Wrenches: > > Where can I purchase a replacement cooling fan for an older Outback MX-60 > controller? > > Thanks, Allan > > -- > > *Allan Sindelar* >

Re: [RE-wrenches] Outback MX-60 replacement fan

Just asking, did you call outback, l have got parts in the past Jerry On Wed, Nov 11, 2020, 3:10 PM Sindelar Solar wrote: > Esteemed Wrenches: > > Where can I purchase a replacement cooling fan for an older Outback MX-60 > controller? > > Thanks, Allan > > -- > > *Allan Sindelar* > al...@sindela

[RE-wrenches] Outback MX-60 replacement fan

Esteemed Wrenches: Where can I purchase a replacement cooling fan for an older Outback MX-60 controller? Thanks, Allan -- *Allan Sindelar* al...@sindelarsolar.com NABCEP Certified PV Installation Professional New Mexico EE98J Journeyman Electrician Founder (R

Re: [RE-wrenches] Sol-Ark Gen Exercise Cycle

Hi Chris I would install a timer. There are many dry contact dc or ac powered with a high degree of programmability. A question about the normal function of the AGS. I’ve talked to a few people that have mentioned that the ags has its own fuzzy logic, with limited programming. And they have h

Re: [RE-wrenches] Sunpower monitoring site

Same issue for me. Can’t analyze any site lately. It has been that way over a month. From: RE-wrenches On Behalf Of Dave Tedeyan Sent: Wednesday, November 11, 2020 10:36 AM To: RE-wrenches Subject: [RE-wrenches] Sunpower monitoring site To the other Sunpower dealers out there, Is anyone el

[RE-wrenches] : Sol-Ark Gen Exercise Cycle

Hi Glenn, Would the idea be to have the GSCM only perform exercise cycles or fully take over AGS functionality? I’m just wondering if both components can be integrated on the same 2 wire circuit, doing different things, without issue. I would rather the Sol Ark maintain the normal start/stop funct

Re: [RE-wrenches] Sol-Ark Gen Exercise Cycle

I believe the Atkinson GSCM could be used to do this.-GlennSent from my 'smart'phone, so please excuse typos and spelling errors.-- Original message--From: Chris SparadeoDate: Wed, Nov 11, 2020 11:16 AMTo: RE-wrenches;Cc: Subject:[RE-wrenches] Sol-Ark Gen Exercise CycleHi all,According

[RE-wrenches] Sol-Ark Gen Exercise Cycle

Hi all, According to Sol-Ark tech support, they do not currently have a programmable exercise cycle for its two-wire start function. When paired with a generator like a Generac Ecogen (exercise cycle is automatically disabled when configured with two wire start) this means that the only way to eff

[RE-wrenches] Sunpower monitoring site

To the other Sunpower dealers out there, Is anyone else having issues with Sunpower's partner monitoring portal? I log in, it takes a couple minutes before I can even view a site, and once I do I can barely get to a new view before I get logged out again. I know that they have a new monitoring si