We've used an adjustable link like this
Ray Walters
Remote Solar
303 505-8760
On 10/15/20 12:50 PM, Chris Schaefer wrote:
I'd suggest reaching out to Travis at MT Solar as he has made custom
manual adjusters for my old installed DPW pole mounts. No bolts to
remove and easy for anyone to adjust
Chris... I'm intrigued by the custom adjusters from MT. What about the
issue of loosening and retorqueing the 350 ftlb main pivot bolt?
On Thu, Oct 15, 2020, 1:50 PM Chris Schaefer
wrote:
> I'd suggest reaching out to Travis at MT Solar as he has made custom
> manual adjusters for my old instal
I’ve found that using brass nuts work well and don’t seize on the SS bolt. Just
be sure to use a lock washer. It’s not like you need a lot of clamping force,
the bolt is in pure shear so brass is fine.
Jeremy Coxon NABCEP
Certified MWBE
Sent from my iPhone
> On Oct 15, 2020, at 9:52 AM, Jere
I'd suggest reaching out to Travis at MT Solar as he has made custom manual
adjusters for my old installed DPW pole mounts. No bolts to remove and easy
for anyone to adjust the angle without the need of a ladder.
Christopher
On Thu, Oct 15, 2020 at 10:25 AM Jay wrote:
> Hi Jeremy,
>
> I’ve not
Hi Jeremy,
I’ve not run into that issue but you could put more bolts at different
locations for different tilts.
A template would keep them the correct spacing.
Wouldn’t slide but would be adjustable.
I don’t know if you’ve tried heat but it’s pretty amazing at getting things
loosened up.
Does anyone have any trick to adjusting the tilt angle of the TPM4 pole mounts?
These are the racks with the aluminum beam (strongback) with slots for the
bolts.
We have tried anti seize, and cutting the heads of the bolts square in attempts
to help with adjustment.
Help!
Jeremy Rodriguez
Sol
6 matches
Mail list logo