] On
Behalf Of Chris Worcester
Sent: Thursday, August 11, 2016 10:33 AM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
When we have the Enphase 240 VAC trunk line branching in two directions we
use these 300V rated Alumiconn 3 port connectors, to make them up
er, but that may be for someone else to confirm.
>
> Glenn
> --
> From: Ray Walters <r...@solarray.com>
> Sent: 8/11/2016 12:55
> To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
> Subject: Re: [RE-wrenches] Pass through/transition box
-Original Message-
From: "Ray Walters" <r...@solarray.com>
Sent: 8/11/2016 12:55
To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
So this may be a dumb question, but I'm assuming wire nuts a
PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
How about these?
https://idealind.com/us/en/products/wire-termination/set-screw-connectors/se
t-screw-connectors/set-screw-wire-connectors.aspx
Jeremy Rodriguez
Solar Installation And Design Expert
All
Thursday, August 11, 2016 7:03 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
Hopefully manufacturers will steer away from supplying fine stranded wires with
their trunk cables – it’s been a joke trying to fine the proper listed
reasonably priced parts to
ubject:* Re: [RE-wrenches] Pass through/transition box for Enphase
The Ideal website for the Buchanan splice has a link to the UL listing
for the product. It does not list it for use with anything other than
standard stranded conductors.
If it is not part of the listing, it is not approved for th
[mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
Behalf Of *Glenn Burt
*Sent:* Wednesday, August 10, 2016 8:44 PM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] Pass through/transition box for Enphase
The Ideal website for the Buchanan splice has a link to the UL listing for
the product. It does
32 PM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] Pass through/transition box for Enphase
How about these?
https://idealind.com/us/en/products/wire-termination/set-screw-connectors/set-screw-connectors/set-screw-wire-connectors.aspx
Jeremy Rodriguez
Solar Installation And Design Expert
All
] Pass through/transition box for Enphase
How about these?
https://idealind.com/us/en/products/wire-termination/set-screw-connectors/set-screw-connectors/set-screw-wire-connectors.aspx
Jeremy Rodriguez
Solar Installation And Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
How about these?
https://idealind.com/us/en/products/wire-termination/set-screw-connectors/set-screw-connectors/set-screw-wire-connectors.aspx
Jeremy Rodriguez
Solar Installation And Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and
Of Mike Nelson
Sent: Wednesday, August 10, 2016 7:07 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
I don't know what they're listed for but I know that they are very effective.
Michael D Nelson
MD Electric & Solar, Inc.
707-684-0064 mobile
707-884-
com> wrote:
>
> But are they listed to be used with greater stranded conductors than class B
> or C (7 or19)?
> From: Carl Adams
> Sent: 8/10/2016 17:37
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
>
> I second Mike Nelson's approach, simpl
used.
> I saw a few incorrect Polaris blocks pulled from an installation recently
> that had melted...
> --
> From: Michael Morningstar <mjmornings...@gmail.com>
> Sent: 8/8/2016 15:23
> To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
ks pulled from an installation recently
> that had melted...
> --------------
> From: Michael Morningstar <mjmornings...@gmail.com>
> Sent: 8/8/2016 15:23
> To: RE-wrenches <re-wrenches@lists.re-wrenches.org>
> Subject: Re: [RE-wrenches] Pass thro
t;> fine stranded conductors. NSI has a special Polaris terminal that is grey
>>> that is listed for use with fine stranding, and can safely be used.
>>> I saw a few incorrect Polaris blocks pulled from an installation recently
>>> that had melted...
>>> From: M
pulled from an installation
recently that had melted...
From: Michael Morningstar <mailto:mjmornings...@gmail.com>
Sent: 8/8/2016 15:23
To: RE-wrenches <mailto:re-wrenches@lists.re-wrenches.org>
Subject: Re: [R
rrect Polaris blocks pulled from an installation recently
> that had melted...
> From: Michael Morningstar
> Sent: 8/8/2016 15:23
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Pass through/transition box for Enphase
>
> I use DIN rail mount "feed through" terminal blocks.
.
I saw a few incorrect Polaris blocks pulled from an installation recently that
had melted...
-Original Message-
From: "Michael Morningstar" <mjmornings...@gmail.com>
Sent: 8/8/2016 15:23
To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org>
Subject
Din rail mounted terminal blocks Weidmuler WDU6 or WDU10, depending on the
wire size you are using.
Benn Kilburn
SkyFire Energy Inc.
780-906-7807
> On Aug 8, 2016, at 12:49 PM, Jason Szumlanski
> wrote:
>
> I'm looking to bring 8 Enphase 240V circuits
Soladeck.
Michael D Nelson
MD Electric & Solar, Inc.
707-684-0064 mobile
707-884-1862 office
www.mdelectricsolar.com
Sent from my iPhone
> On Aug 8, 2016, at 8:49 AM, Jason Szumlanski
> wrote:
>
> I'm looking to bring 8 Enphase 240V circuits in multiple
I use DIN rail mount "feed through" terminal blocks. There's all kinds and you
will find some constructed such that no live parts exposed.
Michael
> On Aug 8, 2016, at 8:49 AM, Jason Szumlanski
> wrote:
>
> I'm looking to bring 8 Enphase 240V circuits in
I'm looking to bring 8 Enphase 240V circuits in multiple conduits into an
enclosure inside the attic where I can transition to Romex. I'd rather use
some kind of rail mounted terminals in an enclosure or something rather
than making splices in a generic j-box. I'm not looking to combine circuits
-
22 matches
Mail list logo