How do I found out if I be redirected to another
newserver than my ISP's.
My ISP use my NIC MAC-address to identify my PC:
Is the any software availabel that can trace such an
redirection?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knu
--- Matt McElreath <[EMAIL PROTECTED]> skrev: > But
my DSL uses dynamic IP. Does that matter?
You must first test if your card is accessible.
Then if it is type /sbin/dhcpcd -n eth0
to get the dynamic ip adress from your isp.
>
>
> > Matt
> > It looks like that man. Try to assign an
> ip-addr
--- Matt McElreath <[EMAIL PROTECTED]> skrev: > I'm
still trying to configure Red Hat for DSL and
> cant get it. Remember,
> I'm on 7.0 so I dont have the new network
> administration tool. I've been
> having trouble trying all your suggestions but I
> think its because my
> computer is not recog
?
> I reinstalled the package - nothing.
>
> Andreas
>
>
> Kjetil Tjensvold wrote:
>
> >
> > I'am uncertain of BOOTPROTO=static
> > if this should be none instead.
> > Can you bring up your connection by typing
> > /sbin/dhcpcd
I'am uncertain of BOOTPROTO=static
if this should be none instead.
Can you bring up your connection by typing
/sbin/dhcpcd -n eth0 or
eth1 depending on what NIC you use to DSL router.
--- Andreas Gundacker <[EMAIL PROTECTED]> skrev: >
>
> Dear list and networking gooroos!
>
> I am experienci
--- ABrady <[EMAIL PROTECTED]> skrev: > On Sat, 15 Jun
2002 21:59:41 +0200 (CEST)
> Kjetil Tjensvold <[EMAIL PROTECTED]> wrote:
>
> > --- ABrady <[EMAIL PROTECTED]> skrev: > On Sat, 15
> Jun
> > 2002 12:21:55 +0200 (CEST)
> > > Kjetil Tjen
--- ABrady <[EMAIL PROTECTED]> skrev: > On Sat, 15 Jun
2002 12:21:55 +0200 (CEST)
> Kjetil Tjensvold <[EMAIL PROTECTED]> wrote:
>
> > I cant get into linux. My RH 7.2 hangs when
> booting
> > up with this message.
> > /etc/rc5.d/S99local !bash/sh no s
I cant get into linux. My RH 7.2 hangs when booting
up with this message.
/etc/rc5.d/S99local !bash/sh no such file or
directory.
I can t get into it wit my rescue disk either.
Any idea.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_
I have compiled that kernel source whitout any
problems. But the first code I downloaded didnt work,
so I had to downloaded it again. I thing there was an
error on the transmission that dident show up.
--- Jorge Gossain Filho <[EMAIL PROTECTED]>
skrev: > Hi all,
>
> I have been with a problem
I use cups on a redhat 7.2 system with 2.4.18 kernel.
It's a couple of monts now since I installed cups, but
I downloaded the tarball. I like prefer tarballs
instead of rpm's since they give you more options when
installing. However I dont think there would be so
much diffrence from a 7.3 rpm to a
I have used make bzImage about 10 times, and it work
fine for med.
--- "Maynard B. Fernando" <[EMAIL PROTECTED]>
skrev: > guys,
>
> just want to ask why some are using make bzImage,
> some are
> make zlilo? what are the difference between the two?
> which
> command is the best? or tht
>
> Ma
The docking function in the panel suddenly
disapeared.
Any ideas?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Yahoo! Dokumentmappe
Tilgang til dine viktigs
Anyway, it's not supported in the 7.2 kernel so I
guess you must find a linux driver for the camera.
--- Patrick Nelson <[EMAIL PROTECTED]> skrev: > Have
RH72 and a Sony DSC-P5 Digital Still Camera.
>
> This camera has a USB output and on a Winbloz system
> it shows up as another
> disk drive w
I dont know about the first one, but the second
question you must check for automatic power down. I
think it is on the general setup window.
--- Wei Wu <[EMAIL PROTECTED]> skrev: > i'm on
rh7.3 now.because this version not support my
> sound card,i have to
> recompile the kernel.two questions b
I cant find linuxconf on the panel. I have redhat 7.2
kernel 2.4.18
--- Amir Tal <[EMAIL PROTECTED]> skrev: > On Tuesday
07 May 2002 19:50, Kjetil Tjensvold
> wrote:
> > How do I changer linux to look for eth1 as default
> > card when dhcpcd is run during boot?
>
How do I changer linux to look for eth1 as default
card when dhcpcd is run during boot?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Yahoo! Dokumentmappe
T
I too get that
--- "Andy Elacion, Jr." <[EMAIL PROTECTED]>
skrev: > Why do I received all the dessages in double?
>
>
>
> ___
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
=
Investigat
I have problem to get my screensaver working after
upgrade the kernel from 2.4.7-10 to 2.4.18. And I get
this message when booting and shut down. Modprobe
Cannot locate char-major-10-135. I wonder if that has
something to do with the screensaver that doesent work
in gnome?
=
Investigating the
What is the command to view all 65536 ports by name?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Sjekk snørapporter...
fra 500 ski-destinasjoner i Europa
p
What port is Xvideo port? I use a firewall so I have
to open it to play videos.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Sjekk snørapporter...
fra 500 s
Ok I'll try that:-)
-- Matthew Saltzman <[EMAIL PROTECTED]> skrev: > On
Sun, 28 Apr 2002, [iso-8859-1] Kjetil Tjensvold
> wrote:
>
> > gcc3 disnt show up after grep gcc.
>
> Sorry, I wasn't clear. That was my system, showing
> both compilers
>
I tried to but it didn't figure out. It wont compile
against 2.96-98
--- Michael Fratoni <[EMAIL PROTECTED]>
skrev: > -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Sunday 28 April 2002 06:29 am, Kjetil Tjensvold
> wrote:
> > How do I completely rem
gcc3 disnt show up after grep gcc.
--- Matthew Saltzman <[EMAIL PROTECTED]> skrev: > On
Sun, 28 Apr 2002, [iso-8859-1] Kjetil Tjensvold
> wrote:
>
> > How do I completely remove gcc-2.96-98 from my rh
> 7.2
> > system.I want to install gcc-3.0.4 due to com
I have not setup wine.conf.I get this error.
wineserver:chdir /root/.wine :No such file or
directory.
I have mounted the windows drive and tried to run some
windows programs.
--- Ben Logan <[EMAIL PROTECTED]> skrev: > On Sun, Apr
28, 2002 at 11:56:15AM +0200, Kjetil
> Tjensvold
How do I completely remove gcc-2.96-98 from my rh 7.2
system.I want to install gcc-3.0.4 due to compile
MPlayer.As known this program will not compile with
gcc-2.96-98 compiler. I dont want any files containing
the old version number hang around. I want it
completely removed. I have tried to force
I have redhat 7.2 and during boot it seems that wine
is started, but I can not run any windows programs.
How do I really see if its running?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
_
Hi.
I've just installed xine but it wont play videos. I
get this
error. There is no available demuxer to handle .
But when I check xine from monitor it loads the
demuxes. Several of them. Is there something wrong
with the videofile that demuxers dont support, Do you
have a link to a video-file tha
What media-player is the best for redhat 7.2 and where
can I download it?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Sjekk snørapporter...
fra 500 ski-des
a reader here said that I must apply ip-adresses to
the winboxes.
--- Bret Hughes <[EMAIL PROTECTED]> skrev: > On
Thu, 2002-04-25 at 08:44, Kjetil Tjensvold wrote:
> > I have not configured anything in a config file.
> But
> > when I type dhcpcd -n eth0 I get to the
resoulution is set on the win
box.
--- Benjamin Rich <[EMAIL PROTECTED]> skrev: > Did you
setup DHCP on your linux machine?
>
> -Original Message-
> From: Kjetil Tjensvold [mailto:[EMAIL PROTECTED]]
>
> Sent: Thursday, April 25, 2002 2:51 AM
> To: redhat list re
Do I have to use any route commands?
-- ABrady <[EMAIL PROTECTED]> skrev: > On Thu, 25 Apr
2002 08:50:54 +0200 (CEST)
> Kjetil Tjensvold <[EMAIL PROTECTED]> quietly
> intimated:
>
> > How do I set up an internet route to my subnet.
> > eth0 card connects
How do I set up an internet route to my subnet.
eth0 card connects to internet and eth1 to the subnet
hub. I have enabled ip forwarding like this.
echo "1" > /proc/sys/net/ipv4/ip_forward.
The win95 maschine says it cant find dhcp server.
=
Investigating the Norwegain 4.th Secret Service
The
Me too had problems with rh 7.2 and postscript. I
installed Cups (Common Unix Printing System) and now
all works fine. I had no problems when I had rh 7.0
installed so it is a 7.2 problem.
-- Anand Buddhdev <[EMAIL PROTECTED]> skrev: > I seem to
be unable to print Postscript level 3.0
> files on
Then I'am afraid I have no ide if your isp recently
not have changed its policy.
-- The Gyzmo <[EMAIL PROTECTED]> skrev: >
> --- Kjetil Tjensvold <[EMAIL PROTECTED]> wrote:
> > Has it worked before,If yes I'am afraid I can't
> help
> > y
ards or run the linuxbox as a router.
--- The Gyzmo <[EMAIL PROTECTED]> skrev: >
> --- Kjetil Tjensvold <[EMAIL PROTECTED]> wrote:
> > Have you enabled ip-forwarding and bridge on your
> > linux-box.
> > I assume the clients is getting the ip adress
> &
Have you enabled ip-forwarding and bridge on your
linux-box.
I assume the clients is getting the ip adress through
your linuxbox???
--- The Gyzmo <[EMAIL PROTECTED]> skrev: > Hello list
members.
>
> I've just configured my Red Hat 7.2 box as a gateway
> for DSL and I've started using DHCPd aga
What do I have to check to get loopback when compiling
kernel 2.4.7-10.
Any idea?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Sjekk snørapporter...
fra 500
Still no ping from 127.0.0.1 although the loopback
device is up.
I get an error message on boot up, the line after
Starting lo .OK
Cant perform dump , access denied.
Do it has anything to do with the firewall highest
level I have???
=
Investigating the Norwegai
There is a bug in make dep or make bzImage when
compiling the rh 7.2 2.4.7-10 kernel.
If you disable File systems /devpts and keep unix98
PTY checked to y ,you will get an error message during
boot saying mounting local filsystems, failed due to
devpts is not supported by the kernel.
It has no eff
I have the source code in /usr/src/linux-2.4.7-10 dir.
I do
make xconfig and do all the checkouts to a minimum.
make dep
make clean
make bzImage
make modules
make install
make modules_install
cp ./arch/i386/boot/bzImage /boot/vmlinuz-2.4.7-10
lilo
reboot
and it didnt work.
Have I missed something
INPUT -i lo -s 127.0.0.0/8 -d
> 127.0.0.0/8 -j ACCEPT
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> On Behalf Of Kjetil Tjensvold
> Sent: Thursday, April 18, 2002 3:01 AM
> To: [EMAIL PROTECTED]
> Subject: Re: No ping at
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Kjetil
Tjensvold wrote:
> >
> > --- Thorsten Strusch <[EMAIL PROTECTED]> skrev: >
> Kjetil
> > Tjensvold wrote:
> > > >
> > > > uname -r gives 2.4.7-10 and that is correct.
> &g
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Kjetil
Tjensvold wrote:
> >
> > --- Thorsten Strusch <[EMAIL PROTECTED]> skrev: >
> Kjetil
> > Tjensvold wrote:
> > > >
> > > > uname -r gives 2.4.7-10 and that is correct.
> &g
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Kjetil
Tjensvold wrote:
> >
> > uname -r gives 2.4.7-10 and that is correct.
> > Also there is a dir /lib/modules/2.4.7-10/
>
> did you run make modules modules_install again?
>
> Thorsten
> I only
your new messages at the end of the
> > mail,
> > it is more easy to read...
> >
> > Kjetil Tjensvold wrote:
> > > --- Thorsten Strusch <[EMAIL PROTECTED]> skrev: >
> > > > Kjetil Tjensvold wrote:
> > > > >
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Kjetil
Tjensvold wrote:
> > --- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Hi
> > Kjetil,
> > > please append your new messages at the end of
> the
> > > mail,
> > >
-d
> 127.0.0.0/8 -j ACCEPT
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> On Behalf Of Kjetil Tjensvold
> Sent: Thursday, April 18, 2002 3:01 AM
> To: [EMAIL PROTECTED]
> Subject: Re: No ping at 127.0.0.1. Is that normal?
>
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Hi
Kjetil,
>
> please append your new messages at the end of the
> mail,
> it is more easy to read...
>
> Kjetil Tjensvold wrote:
> > --- Thorsten Strusch <[EMAIL PROTECTED]> skrev: >
> > >
I have 2 nic's of same brand Realtech 8139, and when
compiling the kernel with these cards enabled nautilus
doesen't show up. If I disable the cards nautilus show
up. When the cards is enabled should really don't have
any impact on starting nautilus.Is this a bug???
Also the loopback is down when
uname -r gives 2.4.7-10 and that is correct.
Also there is a dir /lib/modules/2.4.7-10/
--- Bret Hughes <[EMAIL PROTECTED]> skrev: > On
Tue, 2002-04-16 at 11:53, Kjetil Tjensvold wrote:
> > Last time I rembered that there where mudules
> showing
> > up when I type ls
127.0.0.1 doesen't show up in the ipchain,but I think
it wasen't there before I compiled the kernel either.
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Hi
Kjetil,
>
> Kjetil Tjensvold wrote:
> > 17 Apr 2002, Kjetil Tjensvold wrote:
> > > > ---
ck
> connection without
> installing loopback block device, but it works and
> it doesn't add much for
> the kernel. You might find it usefull too if you
> want to mount an iso file
> as a block volume.
>
>
> At 03:02 PM 4/17/2002 +0200, you wrote:
> >Hi Kje
It is in /etc/hosts
But I cant see accept in the IPchain. How do I enable
it here?
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Hi
Kjetil,
>
> Kjetil Tjensvold wrote:
> > 17 Apr 2002, Kjetil Tjensvold wrote:
> > > > --- Thorsten Strusch <[EMAIL PROTECT
I'll check it out, but I think I rember that there was
an /lib/modules/2.4.7-10
--- Bret Hughes <[EMAIL PROTECTED]> skrev: > On
Tue, 2002-04-16 at 11:53, Kjetil Tjensvold wrote:
> > Last time I rembered that there where mudules
> showing
> > up when I type lsmod.
The loopback didnt show up after compiling kernel.
I had to do ifconfig lo up
before it shows up.But now it is not answering the
ping.
I thought you could ping 127.0.0.1
Any idea??
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_ha
Hi .
After been messing around with the system for a while,
the only thing remindig is to start nautilus after
login.
Its no effect typing natilus from console:-(
and to get cups working.
I cant get into the admin page in cups
http://localhost:631/admin
Error Connection closed by server.
I have op
it switcher (or
> something), chmod u+x
> it, and run ./swither kde or ./switcher gnome.
>
> you could also put it in /usr/bin i supppose.
>
> hope that helps.
>
> i'm sure i'll get flamed for something. ;-)
>
> On Tue, 16 Apr 2002, Kjetil Tjensvold
-
You got it Bill. Now I'am back at the beginning again.
I really appreciate that. Thanks a lot
-- Bill Crawford <[EMAIL PROTECTED]> skrev: > On
Tue, 16 Apr 2002, Kjetil Tjensvold wrote:
>
> > Ok I was just wonder. But now the KDE panel also
> shown
> > up
know of exactly how to do this.
>
> thanks
>
> carl
>
> -Original Message-
> From: Kjetil Tjensvold [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 16, 2002 12:01 PM
> To: [EMAIL PROTECTED]
> Subject: RE: How to start KDE
>
>
> Can I have both as defult
After recompiling rh 7.2 everything goes wrong.
Modprobe don't find modules.
KDE don't start
Nautilus don't start and is unable to start typing
nautilus.
Any idea
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
___
; into the desktop settings
> and set KDE as the default X service.
>
> I think I said that right.
>
> carl
>
> -----Original Message-
> From: Kjetil Tjensvold [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 16, 2002 10:42 AM
> To: redhat list redhat list
> Sub
How do you start KDE??
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Sjekk snørapporter...
fra 500 ski-destinasjoner i Europa
på http://no.snow.yahoo.com/
<[EMAIL PROTECTED]> skrev: > On
Tue, 2002-04-16 at 05:01, Kjetil Tjensvold wrote:
> > No modules loaded after recompiling rh 7.2.
> > lsmod shows no mudules, and modprobe gives
> > Can't locate module.
> > Any idea?
>
> What modules are looking for? Did y
Hi.
I have problem to get a bridge between my 2 nic's
which are of the same brand. I use gnome setup bridge
gbrctl
and get port disabled or in unknown stae.
Any idea???
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.ht
No modules loaded after recompiling rh 7.2.
lsmod shows no mudules, and modprobe gives
Can't locate module.
Any idea?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
KDE disapeared after recompiling kernel rh 7.2.
Any idea???
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.htm
__
Sjekk snørapporter...
fra 500 ski-destinasjoner i E
Redhat 7.2 has problems with 2 nic's.
That my experience also.
--- Delane Jackson <[EMAIL PROTECTED]> skrev: > I
have 2 nic cards on my machine. I am triple
> booting
> Windows 2000 Advance server, Windows XP, and Redhat
> 7.2. After re-installing linux for whatever reason
> both cards come u
on't know where make
modules_install put the modules..
>
>
>
> T
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of
> Kjetil Tjensvold
> > Sent: Monday, April 15, 2002 5:45 PM
> > To: redhat
If abybody newly compiled that kernel, please email me
the /usr/src/linux/.config file.
I have an amd 586 processor, 2 nic's realtech 8139 and
an usb printer. And I want bridge enabled.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_o
I've tried lsmod, but no modules at all are loaded.
What could be wrong??
--- Thorsten Strusch <[EMAIL PROTECTED]> skrev: > Hi
Kjetil,
>
> Kjetil Tjensvold wrote:
> >
> > Ipchains incompatible with this kernel . I get
> this
> > message when I tr
lsmod list no modules after recompiling the kernel.
Is this normal or what is wrong. Have I forgotten something???
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
_
Nautilus disapeared after recompiling the kernel rh
7.2.
I wont work typing nautilus in monitor.
Any idea what to do???
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
_
Ipchains incompatible with this kernel . I get this
message when I try ipchains -L
This what happend after recompiling the kernel.
Any idea what to do to get back my ipchains?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_k
-
Nope ir doesn't work.
I've just recompiled my kernel you know, and after
that it wouldnt work
-- Brandon Dorman <[EMAIL PROTECTED]> skrev: > if
you can open a console, (try clicking both mouse
> buttons for a menu)
> just type nautilus.
>
> On Sun, 2002-0
What must be checked comp.kernel to enable ipchains?
I have no ipchains or iptables afer compiling kernel.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sje
How do you activate Nautilus?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sjekk snørapporter...
fra 500 ski-destinasjoner i Europa
på http://no.snow.yahoo
Hi and thanks you folks for helping me compiling
the kernel.
Now it starts sucessfully.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sjekk snørapporter...
I was just wonder if there is any log available
from compiling the kernel.
My system hangs half way on booting, so I was just
wondering if it was possible to look at the bootlog to
see exactly where it hangs.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hje
I was just wonder what must be a minimun checked
when compilin the kernel.
I have checked for the processor type, enable
networking, the nic cards realtech 8139. No sound
cards
but enabling bridge and tcp/ip.
Anybody having the /usr/src/linux/.config file after
recompiling the kernel, please email
PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> On Behalf Of Kjetil Tjensvold
> Sent: Saturday, April 13, 2002 10:11 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Problem compiling kernel rh 7.2
>
> I had an previous bootdisk, I don't know what you
> mean that I have the old kernel
t; On Saturday 13 April 2002 10:31 pm, Kjetil Tjensvold
> wrote:
> > I figured it out and have enabled bridging, but
> > now the system won't boot.
> > Or it take incredable long time to reboot. Seems
> that
> > it hang after Loading Linux
&g
I found one failure. I'd haven't checked for the
right processor. But there are more faults.
Now it boot half way.
--- Keith Morse <[EMAIL PROTECTED]> skrev: > On Sun, 14
Apr 2002, Kjetil Tjensvold wrote:
>
> > I figured it out and have enabled bridging, but
&
L PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> On Behalf Of Kjetil Tjensvold
> Sent: Saturday, April 13, 2002 7:36 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Problem compiling kernel rh 7.2
>
> Thats correct. But now it won't reboot.
> Any suggestions what could be wrong??
&g
Thats correct. But now it won't reboot.
Any suggestions what could be wrong??
--- Devon <[EMAIL PROTECTED]> skrev: >
-BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Saturday 13 April 2002 12:41 pm, Kjetil Tjensvold
> wrote:
> > I do
> > make xconfig
wait???
--- Keith Morse <[EMAIL PROTECTED]> skrev: > On Sat, 13
Apr 2002, Kjetil Tjensvold wrote:
>
> > Hi.
> > How do I compile a redhat 2.4.7-10 kernel with
> > bridging enabled?
> >
>
>
> Highly recommended reading.
>
>
http://www.redhat.c
I do
make xconfig
and eneable bridging to y
then
make dep
then
make bzImage
the the error came when I try
make modules_install
Some stupid dummy.o it didn't find.
Any suggestions?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hau
Hi.
How do I compile a redhat 2.4.7-10 kernel with
bridging enabled?
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sjekk snørapporter...
fra 500 ski-destina
Anybody having experience with 2 nic's in rh 7.2???
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sjekk snørapporter...
fra 500 ski-destinasjoner i Europa
p
Hi.
Anybody that have experience with 2 nic's
in redhat 7.2
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sjekk snørapporter...
fra 500 ski-destinasjoner i
Hi.
Is there a way to do bridgeing in a simlpe manner
between eth0 and eth1 cards on a redhat 7.2 system.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
__
Sjek
Hi.
I have problems with my redhat 7.2 and two nic's.
In the beginning it went fine, but after a while the
system could't resolve the new ip addresses I got from
my isp.
It is changing once a day. It seems like the daemon
resolving dhcp didn't work.
Anybody else having the same problems or is ther
Hi.
Anybody used gnome bridge control on a redhat 7.2
I can't get it to work. I have 2 nics and try to
connect eth0 and eth1. I get port closed or in unknown mode.
=
Investigating the Norwegain 4.th Secret Service
The multiheaded animal.
http://hjem.sol.no/altiett/knut_ove_hauge_kuren.html
_
Yesterday I was advised to edit the
/etc/sysconfig/network file, and I have done so, but
cant still connect to internet from my win98 box.
I use redhat 7.2 with highest firewall.
Do I have to open a port in the ipchain to get out.?
In that case which port?
Or is there any other things to do? I ha
What connection? ADSL , ISDN or a modem?
--- Hytham Shehab <[EMAIL PROTECTED]> skrev: >
gurus,
> can anybody give a light on where could be the
> problem, i am connected, but i cann't use the
> connection...
>
> --
> Hytham Shehab
>
=
Investigating the Norwegain 4.th Secret Service
There not much to edit in that file :-)
--- "Anthony E. Greene" <[EMAIL PROTECTED]> skrev: >
-BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Thu, 28 Mar 2002, Kjetil Tjensvold wrote:
> >Yes I have set the gateway (is this the default
> route
Hi Mike.
Yes I have set the gateway (is this the default route)
on the winbox to 192.168.0.1 (my linixbox)
I have not enabled ip forwarding. How do u do that.?
-- [EMAIL PROTECTED] skrev: >
[EMAIL PROTECTED] wrote:
> > Hi.
> > It's really a samba question,but I can't acess
> that
> > list toda
Hi Alan.
I wanted to get a new dchp address whiout rebooting.
So I'll thing the first thing you said I will try.-
-- Alan Peery <[EMAIL PROTECTED]> skrev: > Bret Hughes
wrote:
>
> > On Wed, 2002-03-27 at 06:23, Kjetil Tjensvold
> wrote:
> > > Is the
Hi.
It's really a samba question,but I can't acess that
list today.
I have redhat 7.2 and installed samba 2.2.3a. I see
the sambaserver from my win98 client, and I see the
winbox from linuxbox. But I can't connect to internet
from the winbox which I can from the linbox. I have 2
nic's and the eth0
I load modules in /etc/rc.local
I have redhat 7.2
--- Rénald_CASAGRAUDE <[EMAIL PROTECTED]>
skrev: > Hi !
>
> How to load modules at startup ?
> Is there any file like /etc/modules (in Debian), or
> may
> I edit /etc/rc.local ???
>
> What's the cleanest way to do this ?
>
> Thanks !
>
> R.
Hi.
I-ve just installed a secondary NIC. I was promped
from my redhat 7.2 if I want to migrate the settings
from my first eth0 card which I answered yes to.So all
works fine. My old etho has become eth1 and my new
realtech 8139 has become eth0. I want etho to connect
to my adsl modem and eth1 to t
1 - 100 of 147 matches
Mail list logo