Re: [Repeater-Builder] Omnidirectional antenna into 2m band

6 dBdl-6dB ?? over a Dummy Load ? that is about as corny as a Isotropic Radiator offered for sale on April 1st. never seen that formula ... Mark A. Holman, CRO, AB8RU [EMAIL PROTECTED] - Original Message - From: "Jim B." <[EMAIL PROTECTED]> To: Sent: Friday, July 23, 2004 4:28 PM Subjec

RE: [Repeater-Builder] Need schematic for newer style MASTR II VHF PA

I need forgot to include the board assy P/N: 19D886G1 Rev A I have an inoperative MASTR II VHF 65W PA that is apparently a newer style than I have data. It is a one piece board assembly with the driver, PA and harmonic filter on one board. It also does not have the blue IC for power control, b

[Repeater-Builder] Need schematic for newer style MASTR II VHF PA

I have an inoperative MASTR II VHF 65W PA that is apparently a newer style than I have data. It is a one piece board assembly with the driver, PA and harmonic filter on one board. It also does not have the blue IC for power control, but has discrete components. Although the Hall Electronics LBI

Re: [Repeater-Builder] Reverse Burst (was tait t2010)

bradley glen wrote: >Reverse burst is ani-phasing of the pl for about 100ms. Only used on >mechanical reed pl units as in the old micors. > Reverse Burst is NOT only used with reed type PL (ctcss) units. Reverse Burst will work with any type of detection system, mechanical or all solid state.

Re: [Repeater-Builder] tait t2010

Hi Reverse burst is ani-phasing of the pl for about 100ms.Only used on mechanical reed pl units as in the old micors. Regards Brad ZS5WT --- ian wells <[EMAIL PROTECTED]> wrote: > the rev burst wasn't enabled but i tried it enabled > and nothing > happened.thanks for the sugestion > Thank you

[Repeater-Builder] TK-350 portable

Hello does anybody here in the group have the PIN outs for a Kenwood TK-350 portable,,, I got a mic from a guy that said it worked on a kenwood but this one just keys the radio. not sure what brand it is but it works on a maxxon radio..The 350 is what i use on duty and I am also looking for a good

Re: [Repeater-Builder] tait t2010

the rev burst wasn't enabled but i tried it enabled and nothing happened.thanks for the sugestion Thank you Ian Wells Kerinvale Comaudio mail service 1017, Biloela,4715. www.kerinvalecomaudio.com.au 1-email- [EMAIL PROTECTED] 2-email- [EMAIL PROTECTED] - Original Message - From: "russ" <[E

Re: [Repeater-Builder] tait t2010

Give this a try, Turn off the rev. burst. 73 Russ, - Original Message - From: "ian wells" <[EMAIL PROTECTED]> To: Sent: Friday, July 23, 2004 6:17 PM Subject: [Repeater-Builder] tait t2010 > > hi guys > i am wondering if there is a way to setup or to program a t2010 to transmit > a tail