On Aug 2, 2007, at 9:09 PM, Mike Reed wrote:
.http://www.packetradio.com/packetnetworks.html#2
No, that's just a null-modem cable between two TNC's to make a cross-
band gateway. Certainly more like a repeater, since that's
supposed to be the topic of this mailing list, but it's not what
Saw this on eham.net
2007-07-14
*KD0YX http://www.eham.net/user/profile/KD0YX*
Test Equipment
*FS: About 20 Cushman Plug Mods $50 Ea
http://www.eham.net/classifieds/detail/235720*
I have a large selection of about 20 Cushman Plug in Modules. I know
they will work fine
Whats wrong with a Dynamotor? Ran my Moto 140-D just fine. My
headlights got real dim when I would squeeze the PTT but was a great
power supply. Then T power came along and caused all sort of new
problems. Seems to me we got started with this FM thing back in the
50's some time.
Vincent
Generally you have to put the Kenwood radios in to programming mode, then
you can read/write to it.
Try one of the following to get it into programming mode.
Press and hold the button below PTT and C button and then turn on. Wait a
couple of seconds.
or
Press and hold MON and A buttons, and
Nate,
I looked in my KPC-3+ manual and they do call out a DCD line on both the RS232
DB25 connector, pin 8, and also on the 9 pin radio connector. However, I
cannot find any reference to it in the manual. Probably there, but cannot
find. Wonder why they could put in a simple chart saying
On Aug 2, 2007, at 7:03 PM, Ron Wright wrote:
Nate,
Would just disabling one PTT while the other is txing mean the
disabled would think it was transmitting, but not really.
That's not what I recommended. I recommended tying one's PTT signal
to the other's RECEIVE signal so it would
Is this what you're looking for?
http://www.ccdx.org/zedyx/mods/2TNCs1Radio.htm
at the cottage till first of week..will check first of the week and let you
know Bob ve1ym
From: va2dq [EMAIL PROTECTED]
Date: 2007/08/02 Thu PM 09:30:48 EDT
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] UHF motorola maxtracs
well at leats one Rob but 2 or 6
Whats wrong with a Dynamotor?
Well lets see, hi, just for fun.
1. very inefficent with it producing lots of heat.
2. very very expensive to make, component and labor wise (the labor factor goes
away if made in China, but can't count on getting one that want kill you with
normal use).
3. very
* Ron Wright [EMAIL PROTECTED] [2007 Aug 03 08:48 -0500]:
Nate,
I looked in my KPC-3+ manual and they do call out a DCD line on both the
RS232 DB25 connector, pin 8, and also on the 9 pin radio connector. However,
I cannot find any reference to it in the manual. Probably there, but
Nate Bargmann wrote:
* Ron Wright [EMAIL PROTECTED] [2007 Aug 03 08:48 -0500]:
Nate,
I looked in my KPC-3+ manual and they do call out a DCD line on both the
RS232 DB25 connector, pin 8, and also on the 9 pin radio connector.
However, I cannot find any reference to it in the manual.
Best I recall there was a choice between hardwiring COR to the TNC or
using internal Data Carrier Detect for the TNC to recognize activity on
the radio channel. This was an input signal from the radio to the TNC.
Way back whenSteve NU5D
Nate Duehr wrote:
Nate Bargmann wrote:
*
Is anybody looking for a spare or replacement Trident LTR TNT trunking
repeater controller. I have such a unit and don't have any reason to keep
it.
Mike Mullarkey K7PFJ
is this the one with the BNC plug on it or the new ver. without?
thanks John
- Original Message -
From: Mike Mullarkey
To: Repeater-Builder@yahoogroups.com
Sent: Friday, August 03, 2007 8:56 PM
Subject: [Repeater-Builder] Trident LTR Controller TNT
Is anybody looking
That did the trick. Thanks a lot.
Andy KC2GOW
[EMAIL PROTECTED] wrote:
Generally you have to put the Kenwood radios in to programming mode, then
you can read/write to it.
Try one of the following to get it into programming mode.
Press and hold the button below PTT and C button
Has the BNC and DB connector for the repeater.
Mike
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Maire-Radios
Sent: Friday, August 03, 2007 5:48 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Trident LTR Controller TNT
16 matches
Mail list logo
