Re: [Repeater-Builder] Looking for a Squelch gate card...

2007-10-07 Thread Steve Allred
Hi Warren, Did you find your card? Steve / K6SCA Warren - VE3ZIN <[EMAIL PROTECTED]> wrote: Looking for a squelch gate card for my Micor C73RTB. After looking on ebay for some time, haven't been able to secure any except for one company that wants a min. $200 order!? de VE3ZIN (

[Repeater-Builder] 220mhz Repeater Amp.

2007-10-07 Thread Adam C. Feuer
Hello All, Looking for any suggestions other than Henry Radio or TE Systems for a 220mhz repeater amp. Preferably 5 to 10 watts in with 100 or so out. Thanks in advanced! Adam N2ACF

Re: [Repeater-Builder] 220mhz Repeater Amp.

2007-10-07 Thread Maire-Radios
Volt-com - Original Message - From: Adam C. Feuer To: repeater-builder@yahoogroups.com Sent: Sunday, October 07, 2007 6:28 PM Subject: [Repeater-Builder] 220mhz Repeater Amp. Hello All, Looking for any suggestions other than Henry Radio or TE Systems for a 220mhz re

RE: [Repeater-Builder] 220MHz Repeater Amp.

2007-10-07 Thread Eric Lemmon
Adam, Look into TPL amplifiers, at www.tpl.com 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Adam C. Feuer Sent: Sunday, October 07, 2007 3:29 PM To: repeater-builder@yahoogroups.com Subject: [Repeater-Builder] 2

[Repeater-Builder] Repacking an antenna into a commercial radome

2007-10-07 Thread georgiaskywarn
Has anyone ever done this? Unfortunately the radome I was playing with this weekend had no room to push the bottom of the Diamond x3200 past the sleeve at the bottom. This is a Andrews 900mhz antenna (or the radome of). SWR was pretty high within the new radome. Put it back in the old one...sw

[Repeater-Builder] Modifying a 300-400 mHz Bandpass Cavity

2007-10-07 Thread Jim Brown
I obtained a pair of DB4018-2 cavities (300-400 mHz on the nameplate) at a hamfest and finally tore into them to see if I could make something worthwhile in the way of frequency coverage out of them. Tests showed that they barely made it up to 400 mHz on the high end, so I disassembled them and

Re: [Repeater-Builder] Repacking an antenna into a commercial radome

2007-10-07 Thread Paul Metzger
Response; I'm currently using a Diamond antenna up at my repeater site which I had packed into a commercial radome. I did have to narrow (grind away) the hub of the diamond antenna where the ground radials had previously mounted to. It is a must that you rebuild the ground radials on the

[Repeater-Builder] Re: 220mhz Repeater Amp.

2007-10-07 Thread skipp025
Re: 220mhz Repeater Amp. Looks like some previous problems have come full circle? Anyway... I have a few of the TPL Brand Amplifiers in use and they like most others... walk and talk all day, every day. I've built the Hamtronics 35 watt repeater amp and it's been working just peachy since a

RE: [Repeater-Builder] Re: duplexer isolation and reciever noise budget

2007-10-07 Thread John Barrett
I don't have a coordinated pair at this time, and someone on my local repeater mentioned something about uncoordinated/unprotected/test/"community" pairs in 144 and 440 bands.. so if you know what they are, that's probably where this repeater will live until I get coordinated (if I get coordinated

[Repeater-Builder] Sinclair Duplexers

2007-10-07 Thread Mick Lindley
If you need VHF duplexers see this set of Sinclair Q2330E 6 cavity duplexers on eBay. Mick, KB4UPI -- I pledge allegiance to the flag of the United States of America, and to the republic for which it stands, one nation, UNDER GOD, indivisible, with liberty and justice for all. --

[Repeater-Builder] Crystal Exchange

2007-10-07 Thread dougd470
I am looking for contact information on the guy that exchanges channel elements (for a modest fee). I have Motorola Micor elements that I want to exchange. The particular one I am thinking of has been around for a lot of years and has a humongous inventory. Does this ring a bell? Any info

RE: [Repeater-Builder] duplexer isolation and receiver noise budget

2007-10-07 Thread John Barrett
OK - the problem may have just gotten beyond easy solution... I just checked with the repeater coordination folks, and if I'm going VHF at all, I'm looking at a year or 2 for a coordinated pair in this area, which pushes me off to the 145.250 / 144.650 "backyard" repeater pair.. which puts me s

[Repeater-Builder] GLB 400b Channelizer Schematic/Manual

2007-10-07 Thread Steve White
Can anyone point me to where I can find a manual for the GLB400b Channelizer? I have an operators manual but there is no schematic and as it turns out there are some un-attached wires floating aroud inside and I need to find out where they go toAny help would be great.. I looked on the rep

Re: [Repeater-Builder] 220MHz Repeater Amp.

2007-10-07 Thread James Adkins
Crescend makes ;possibly the best out there, but I don't know if they make any that will cover the 220 ham band. On 10/7/07, Eric Lemmon <[EMAIL PROTECTED]> wrote: > > Adam, > > Look into TPL amplifiers, at www.tpl.com > > 73, Eric Lemmon WB6FLY > > > -Original Message- > From: Repeater-

[Repeater-Builder] Sinclair link

2007-10-07 Thread Mick Lindley
I'm sorry I forgot the link in the first post. http://my.ebay.com/ws/eBayISAPI.dll?MyeBay&ssPageName=STRK%3AME%3ALNLK&CurrentPage=MyeBaySelling&MyeBay=&guest=1 Mick -- I pledge allegiance to the flag of the United States of America, and to the republic for which it stands, one nation, UNDER GO

[Repeater-Builder] Radius M208 Service Manual

2007-10-07 Thread Dan
Does anyone on the group have a service manual for a Motorola Radius M208. We have one of these radios at our 10 meter receive site that needs repair. The repeater is down until I can locate a service manual for it. Dan, N9UWE