[Repeater-Builder] Re: Micor station modules?

Second question (I've been wondering about this for a long time and was too lazy to ask)! Can Micor station modules be used in an MSR2000 station? and vice-versa? --- In Repeater-Builder@yahoogroups.com, Kris Kirby <[EMAIL PROTECTED]> wrote: > > > Can Micor station modules be used in an MSR20

[Repeater-Builder] Micor station modules?

Can Micor station modules be used in an MSR2000 station? -- Kris Kirby, KE4AHR <[EMAIL PROTECTED]> But remember, with no superpowers comes no responsibility. --rly

Re: [Repeater-Builder] Re: Low-band MaraTrac Squelch Pots

- Original Message - From: "Bob M." <[EMAIL PROTECTED]> To: Sent: Tuesday, February 05, 2008 4:04 PM Subject: Re: [Repeater-Builder] Re: Low-band MaraTrac Squelch Pots [snip] > > I could replace the connector IF I had a part number > and IF Motorola still had one. It's an 18-pin femal

[Repeater-Builder] Call for Papers - ARRL and TAPR Digital Communications Conference

Conferences: ARRL and TAPR Digital Communications Conference The 27th DCC September 26-28, 2008 - Chicago , Illinois Introduction Mark your calendar and start making plans to attend the premier technical conference of the year, the 27th Annual ARRL and TAPR Digital Communications Conference t

Re: [Repeater-Builder] Complete remote base stuff for sale.

Please note: message attached I tried to email directly but it was blocked. I just said that I also have a similar set up for sale.. RBI-1 and a Kenwood 701. I would like to know what you get out of yours so I can figure a starting point on ebay. I also have a RLC-3 with 5 radio cards. 73,

Re: [Repeater-Builder] Complete remote base stuff for sale.

Please note: message attached oh.. here is a guy looking for an RBI-1 only, not the radios [EMAIL PROTECTED] Do you remember what DHE was selling these for? W8RLL _ Play it loud with a new car stereo! Click here! http://thirdpar

Re: [Repeater-Builder] Complete remote base stuff for sale.

Please note: message attached I would be interested in knowing what you get for these. have a RBI-1 and 701 that I'm going to sell... ebay , I guess. Looking for a starting price. also am going to sell my RLC-3 with 5 radio cards...moved and took the repeater apart. 73, Dick W8RLL __

Re: [Repeater-Builder] Re: Low-band MaraTrac Squelch Pots

Bob My manual shows 09-80103m05 is the part number for the female connector mounted on the interconnect board. Ralph KA4DKJ - Original Message - From: Bob M. To: Repeater-Builder@yahoogroups.com Sent: Tuesday, F

Re: [Repeater-Builder] Re: Low-band MaraTrac Squelch Pots

After soldering a wire from point-A to point-B, I thought I fixed the problem, but it persisted. I scoped all the signals on J21 and found that the one on pin 8 was going away. The connection from the audio board, at the back of the pin-side of the connector, to the logic board, and even the inter

Re: [Repeater-Builder] Complete remote base stuff for sale.

> What are you asking for the equipment? David N9CZV Hi eveyone, > I am making some changes on the UHF system we have here in KC. And in > those chages, I have a complete Doug Hall RBI-1 remote interface and > Kenwood TM701a (2m/440) and TM-321A (220) radios to go with it, for > sale. These we

Re: [Repeater-Builder] Astron RS-35M pass transistor Socket

The most reliable solution is to just break those flimsy socket pins off and solder the wires directly to the transistor leads. I've had several supplies fail because of these type sockets. I suspect the transistor may have failed because of the heat produced by the small contact area of the

Re: [Repeater-Builder] Unknown board

The XR2206 and 2211 chips are modulator/demodulator chips... I used them to build a RTTY TU for my Radio Shack Color Computer back in '83 or so. My guess would be some sort of modem. George, KA3HSW -Original Message- >From: "Steve S. Bosshard (NU5D)" <[EMAIL PROTECTED]> >Sent: Feb 5

Re: [Repeater-Builder] Unknown board

Seems like the chips are switched capacitance audio filters - similar used in packet tone encoder / decoder. Don't have a clue. Steve jeffcarlyle wrote: > Hi all, I posted 4 pics in the photo section of a board I got in a lot >

[Repeater-Builder] Complete remote base stuff for sale.

Hi eveyone, I am making some changes on the UHF system we have here in KC. And in those chages, I have a complete Doug Hall RBI-1 remote interface and Kenwood TM701a (2m/440) and TM-321A (220) radios to go with it, for sale. These were hooked in to an Scom 7k. If anyone is interested, email me

[Repeater-Builder] Community Repeater War Stories (the saga continues)

> A community repeater is simply a shared repeater, > When the radio traffic is very sporadic, none of the users > are aware of the other's existence. In an ideal world... in the real world everyone knows who the other co-channel users are. > It works fine until the number of users is i

[Repeater-Builder] ARRL/TAPR Digital Communications Conference in Chicago Dates Announced

Dates for ARRL/TAPR Digital Communications Conference in Chicago Announced (Feb 4, 2008) -- The Tucson Amateur Packet Radio Corporation (TAPR) has announced that the 2008 ARRL/TAPR Digital Communications Conference will take place September 26-28 at the Holiday Inn Hotel in Elk Grove Village,

Re: [Repeater-Builder] Astron RS-35M pass transistor Socket

Hi Vince, cannot help you with the socket - maybe Newark or Mouser, or such. I have seen folks actually solder to the leads on the pass transistor if all else fails. 73, Steve NU5D Vince Staffo wrote: > My Astron RS-35M Power Supply has developed a problem with one of the > sockets used for t

[Repeater-Builder] Astron RS-35M pass transistor Socket

My Astron RS-35M Power Supply has developed a problem with one of the sockets used for the TO-3 Pass Transistors. The Astron supplied socket does not look like it is very good quality. Does anyone know of a better replacemnt socket that I could use? If so please provide part number and where to

[Repeater-Builder] Unknown board

Hi all, I posted 4 pics in the photo section of a board I got in a lot of radio equipment that I purchased. I have no idea what it is or what its used for. All I know is the 2 connectors on the left, the top says TX and the bottom says RX, and the 3 pots on the right say Hi, Lo and VCO. I got 2