Hello every one, I am looking for reasonably priced VHF and UHF
receiver trays. If anyone has these items and wishes to help a poor
boy out it would be greatly appreciated. Please reply direct to kc5cay
at cox dot net thanks.
Brian
KC5CAY
Can you make out anything that they are saying? Is the volume of the
modulation the same as users on the repeater? If you have a lot of
transmitters in the area of your repeater site it may take a little
detective work to find the interference. Or, it may just be in your
equipment. Aren't
First I would completely remove the external amplifier and connect the
repeater directly to the duplexer. Then turn the power up to where it
belongs on the transmitter. Sounds like the transmitter is generating a
spur.
73
Gary K4FMX
_
From: Repeater-Builder@yahoogroups.com
I remember that Neutec Unit... saw it on Ebay.
Mike
Do you have any analog television stations on channel(s) 11
through 14 in the area still on the air?
If so, I might suspect an IF image might be possible. I had
the same type of problem here from channel 13 getting into a
number of Icom
Anyone have any info on a what brand Battery Desulphator to buy?
tom
(\__/) ...
(='.'=)
()_()
try mouser electronics in mansfield, texas
Mike
- Original Message -
From: Laryn Lohman
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, February 25, 2009 10:52 PM
Subject: [Repeater-Builder] Searchng for GE Power Supply Diodes
One of the GE 30A supplies in our
Tom;
I would use a dedicated charger and management device by one of the
solar vendors, such as Xantrex or Morningside, as they are priced at
consumer ( more or less ) pricing and competitive vendors.. and are
some pretty well designed stuff... Many of them have internal
de-sulphate processes
Hi Possib. a high power C.B. operater.
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 26, 2009 9:51 AM
Subject: [Repeater-Builder] Re: Interference or Intermod ( ? ) Helphere
goes
I remember that Neutec Unit... saw
Skipp, why would you not filter it on the input?
Randy
--- In Repeater-Builder@yahoogroups.com, skipp025 skipp...@...
wrote:
I remember that Neutec Unit... saw it on Ebay.
Mike
Do you have any analog television stations on channel(s) 11
through 14 in the area still on the air?
of
moving my machine? Any ideas or suggestions?
n Mike
_
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.3/1973 - Release Date: 02/26/09
07:03:00
__ NOD32 3893 (20090226) Information __
This message
: 270.11.3/1973 - Release Date: 02/26/09
07:03:00
__ NOD32 3893 (20090226) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.3/1973 - Release Date: 02/26/09
07:03:00
__ NOD32 3893 (20090226) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
Thanks Eric and Mike. I somehow missed catching rather obvious
sources for these diodes. I appareciate the help.
Laryn K8TVZ
Tom,
A battery that has sulphated is damaged, and can rarely be returned to 100%
capacity, regardless of advertizing hype. Unless the battery is for a
low-risk application, such as a trolling motor or golf cart, turn it in to a
recycler and buy a new battery that you can depend upon.
73, Eric
Joe,
You should be specific about your needs. Some Micor reeds are thin and some
are fat- and won't fit in some radios. What part numbers do you need?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On
Eric,
The thin one is the vibrasender sender as in transmit - and it is a
TLN6824a
The fat one is the vibrasponder responds or rx the PL tone - and it's a
TLN8381A
This is always the case, and they are not interchangeable between transmit
and receive.
The 88.5 PL frequency is
Folks, I am not a spammer by trade or by choice in normal
circumstances, but I BEG of you to please read this.
If you are even a SMALL enthusiast of Aviation, Aerospace or anything
related to breaking the surly bonds of earth and reaching skyward,
PLEASE take a moment, I beg of you.
To my
Hi Randy,
I did place a notch cavity in the antenna feed line, tuned
to the image frequency of the receiver IF.
As an example
Notch 245.750MHz (TV Channel 14 Audio Carrier Frequency)
245.750MHz minus 21.4 IF = 224.05
Receiver IF Frequencies vary a bit... and both Channel
13 and 14
Database: 270.11.3/1973 - Release Date:
02/26/09
07:03:00
__ NOD32 3893 (20090226) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
__ NOD32 3893 (20090226) Information __
This message
HI BOYS GOT A GOODONE FOR YOU .LOOKING INFO ON A REPEATER ?
NUTEL ELECTRONICS
TYPE 8010H TX
I have 7 boxes of Motorola and GE service manuals that run from the
early 60's to the late 80's.These are free to anyone that wants them.
I would be willing to drive within a 100 miles of my location, Sherman
Texas and meet anyone that wants these manuals. If you want them, you
must take all of
ideas or suggestions?
n Mike
_
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.3/1973 - Release Date:
02/26/09
07:03:00
__ NOD32 3893 (20090226) Information
That's not right, TV channel 14 is 470-476 Mhz.
-- Original Message --
Received: Thu, 26 Feb 2009 08:59:28 PM PST
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Interference or Intermod ( ? ) Helphere
goes
Hi Randy,
I
Re: Single Isolator Panel 137-153 MHz (deal of the day)
Attention!
OK Groovy Guys and Gals... now that I've got mine I'm
going to mention this great deal to the group.
Single Isolator Panel 137-153 MHz
Ebay Item number: 250378625427
These are Alcatel labeled Panels, the ferrite made by
You are right John... I've got to lay off the straight vodka
so early in the evenings.
I was using numbers from the following page for the example:
http://en.wikipedia.org/wiki/North_American_broadcast_television_frequencies
Analog TV Channels 12 and 13 are the potential 224 Amateur
Band
Folks, I am not a spammer by trade or by choice in normal
circumstances, but I BEG of you to please read this.
If you are even a SMALL enthusiast of Aviation, Aerospace or anything
related to breaking the surly bonds of earth and reaching skyward,
PLEASE take a moment, I beg of you.
To my
Eric and Bill,
Thanks for the reply and help.
You are both correct in that some of the reeds will not work in all
applications.
My application, which I should have specified is in a Micor factory
repeater station. The station PL decoder and encoder boards that I
have will accept either the fat
We do not live in a free country anymore do we?
tom
[Original Message]
From: Nate Duehr n...@natetech.com
To: Repeater-Builder@yahoogroups.com
Cc: st...@airspeedonline.com
Date: 2/27/2009 1:06:07 AM
Subject: [Repeater-Builder] Re: [OT] Urgent request - probably off-topic
but please
Where is our moderatoer -- can't we stop this thread -- ??? How did he get
here anyway ???
Rick
On Thu, Feb 26, 2009 at 10:48 PM, Thomas Oliver tsoli...@tir.com wrote:
We do not live in a free country anymore do we?
tom
[Original Message]
From: Nate Duehr n...@natetech.com
Tom,
The marine commercial fishing guys around here on the Southern Oregon
Coast have been having pretty good luck with the Nanopulser units. One
of our local marine dealers have been selling the heck out of them and
the guys are saying 2 or 3 times battery life out of the batteries on
the boats.
Joe ~
Your address won't work on the USPS shipping label - it says that the
address is wrong.
I looked you up on QRZ, and it has a different address for you -
WA7JAW
CARL T BURKLEO
1050 1/2 N JUNIPER ST
COQUILLE, OR 97423
USA
I'm about to try this address to see if the USPS
Come on guys, I was pushing the bounds posting this to a number of
lists.
PLEASE do not reply to the list. Don't get ANY discussion about it
started here. Really.
Just sign up to support Mr. Tupper's reply instead.
Thank you,
Nate WY0X
--
Nate Duehr
n...@natetech.com
32 matches
Mail list logo