Does anyone have High Band Micor receiver available?
Monty, KE7JVX was checking out one of my 222 repeater conversions for numbness
and has narrowed the problem down to asking for "a whole Micor receiver
section,or just the Reciever Auido Power Amplifier and Audio/Squelch Board."
Please contact M
Hello Josh,
Years ago I had copper pipe duplexers for 220MHz and they worked OK, but
were not temperature stable. I had to tune them at least twice a year,
summer and winter. I would be afraid that this may be a problem for
you, especially on 6 meters. Purchasing large diameter copper pipe c
Budd,
I have a TLD 8273B receiver if you can use it.
de Lee
K4LJP
73
On Wed, Nov 4, 2009 at 7:45 AM, Budd T wrote:
>
>
> Does anyone have High Band Micor receiver available?
> Monty, KE7JVX was checking out one of my 222 repeater conversions for
> numbness and has narrowed the problem down to a
Looking for RX and TX channel elements for a Motorola Micor Mobile. Anyone have
a set? Price? etc...
Please email na4it at yahoo dot com.
de NA4IT Scott
I have a 38A and don't know the password. I have tried sending a DTMF digit for
15 seconds, shorting pins 3, 4 on the RS232 jack, and removed the EPROM and re
inserted after reading that this worked. Now, it seems brain dead and won't
even respond to RS232 input.
Does anyone know a foolproof way
Yes it is a good resource, thanks for the find Skipp.
Doug, W9NWN
Original Message
Subject: [Repeater-Builder] Surface Mount Device Soldering Video (very
cool)
From: "skipp025"
Date: Tue, November 03, 2009 3:02 pm
To: Repeater-Builder@yahoogroups.com
If you have the t
Hi, I am new to the group so apologies if this is not what it was intended for.
I have just bought a replica Starsky and Hutch Ford Gran Torino and I am
looking for a single channel Motorola Micor just like the ones used in the TV
show (apparently). It will most likely just be for show, so as lo
Do you need a complete radio or just a control head and speaker for under the
dash? Do you care if the radio works?
wb5oxq
- Original Message -
From: littlejimmy74
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, November 04, 2009 7:51 AM
Subject: [Repeater-Builder] Want
well the tone for 15 sec only resets the unit if locked up and not the program.
never heard of the pins 3 and 4 so I am not sure if I would try it the RS232
defaults as far as I know to off but when you remove the EPROM from the battery
pack under (if you have one) it will put it back to the
9 matches
Mail list logo
