Hi guys .Would anyone have some uhf bpbr diplexers for sale or know of
someone that is selling some
Thank You ,Ian Wells
Kerinvale Comaudio,
3A Murchison Street, Biloela.4715
Ph 0749922449 Mb 0409159932
Hm 0749922574 Fx 0749922767
www.kerinvalecomaudio.com.au
<>
This is a 600 Ohm Delay line used in setting audio delay's on Simulcast
paging systems.
The delay is in micro seconds.
I have used several of these on an old Ameritech 158.100 paging system.
This unit goes between the Link receiver or a leased audio telephone line,
you set the delay by soldering
--- In Repeater-Builder@yahoogroups.com, "Mark" wrote:
>
> John,
>
> I currently am Trustee for a TKR-820 operating on 444.5500. I wonder - is
> this conversion "dual-mode" capable, meaning, can it be accessed BOTH via
> D-STAR and analog radios, or does it render analog access unusable? I do
Larry---
What is a 300 foot length of good condition 7/8" hard line worth to you? I'm
in the SF bay area---I won't ship but maybe you can find somebody that will
pick it up here---
What ever your offer, sale will be up to the approval of a local repeater
group here that owns it.
Scott
Does anyone know offhand:
a) when rebanding will be complete in the USA.
b) when it will be complete in PA.
Thanks,
Joe M.
Yes hard line, thanks.
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ken Arck
Sent: Monday, June 28, 2010 9:18 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] 1/2 or 7/8 coax needed
At 10:03 PM 6/27
I would think it would cost more to ship then its worth for me :( I am in
Canada .. and looking
On Mon, Jun 28, 2010 at 4:39 PM, ac6vj wrote:
>
>
>
> The cabinets come with the card cages, but alas, no cards.
> I wish they did come complete so I would have one to play with myself.
>
> Gregory
The cabinets come with the card cages, but alas, no cards.
I wish they did come complete so I would have one to play with myself.
Gregory AC6VJ
--- In Repeater-Builder@yahoogroups.com, "Maire-Radios"
wrote:
>
> have any traffic controllers?
>
>
> - Original Message -
> From: a
Air or land?
Kb0wlf
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Maire-Radios
Sent: Monday, June 28, 2010 1:04 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Out Door Radio Cabinet
have any traffic contro
Maybe a telephone loop simulator... numbers would be distances? Just a
thought.
Look at the R/L/C between input and output pairs.
Matthew Kaufman
I agree. Let's let this die.
Scott - List Co-Owner
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
Ken Arck wrote:
> Oh, this is not going to end well :-)
>
> Ken
have any traffic controllers?
- Original Message -
From: ac6vj
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 28, 2010 12:41 PM
Subject: [Repeater-Builder] Re: Out Door Radio Cabinet
Hi Larry,
I have a stash of traffic signal boxes here in Northern Calif
Every ten minutes, it speaks in code. Hmm...maybe still works! ;^)
- Original Message -
From: and...@msu.edu
To: Repeater-Builder@yahoogroups.com
Sent: Monday, June 28, 2010 9:52 AM
Subject: RE: [Repeater-Builder] Re: Harmful Taxing
Quoting Yahoo :
...Well, since re
John,
I currently am Trustee for a TKR-820 operating on 444.5500. I wonder - is
this conversion "dual-mode" capable, meaning, can it be accessed BOTH via
D-STAR and analog radios, or does it render analog access unusable? I do
not want to do this if it eliminates analog access, since this is an
Hi Larry,
I have a stash of traffic signal boxes here in Northern California.
I donate them free of charge to any good Ham cause.
AC6VJ {ac...@cds1.net}
--- In Repeater-Builder@yahoogroups.com, "Larry Watkinson"
wrote:
>
> I am looking for a outdoor radio cabinet, something like a traffic c
10v regulator, repeat audio, and repeat card
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AJ
Sent: Monday, June 28, 2010 10:53 AM
To: Repeater-Build
At 10:03 PM 6/27/2010, Larry Watkinson wrote:
>
>
>I am in need of 1/2 or 7/8 coax. I live in Olympia, WA and I am willing to
>pick up within 100 miles or pay shipping to Olympia, WA.
<--Larry, when you say "coax", you probably mean "hardline", correct?
As there are many types of hardline, you ne
Oh, this is not going to end well :-)
Ken
--
President and CTO - Arcom Communications
Makers of repeater controllers and accessories.
http://www.arcomcontrollers.com/
Authorized Dealers for Kenwood and Telewave and
we off
I have a bandpass/band notch diplexer that I am currently tuning up to
replace the 6ld450s so we will see how it goes shortly .
Thank You,
Ian Wells,
Kerinvale Comaudio,
3A Murchison Street,Biloela.4715
Ph 0749922449 or 0409159932 or 0749922574
www.kerinvalecomaudio.com.au
---Or
I had a controller failure over the weekend causing some serious audio
issues on a Mastr II repeater we deployed last week. What are the minimum
control shelf cards needed to put the repeater back in to a "factory"
repeat? I can get an IDer wired up in band to meet legal requirements but
need to ge
Quoting Yahoo :
> Was the "Repeater" a republican, democrat, or independent???
>
>
>
> Jeff
Well, since repeaterr mindlessly mimic what they hear, I'd say
Rebublican.
--STeve Andre'
wb8wsf oh12
> "John" wrote:
> My conversion project is at:
> http://k7ve.org/blog/2010/06/converting-the-kenwood-tkr-820-to-use-with-d-star/
> 73 de K7VE
Very nice project... the only thing that drives me crazy is:
"If you haven't guessed I used a piece of CAT-5 cable between
the connectors."
I hate C
> "Ian Wells" wrote:
> Currently I have no filters between the link transmitter
> and its antenna.
The next question in our Top Twenty Radio Hits - Countdown List
is "do you have any spare or available cavities to try a few
things we might suggest?"
"Selection B" Are any extra or "availab
Was the "Repeater" a republican, democrat, or independent???
Jeff
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of John
Sent: Sunday, June 27, 2010 11:09 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Harmful Taxing
Thanks for the link Skip - I had gone to their
site, but didn't see the stuff under 'clearance'.
These are the caps that the original article used.
Tim
I am looking for a outdoor radio cabinet, something like a traffic control
box.
I am in Olympia and would be able to go within 100 miles of Olympia, WA. I
could pay shipping to Olympia if outside of 100 miles.
Larry KC7CKO
On 6/28/2010 2:08 AM, John wrote:
>
> --- In Repeater-Builder@yahoogroups.com, Scott Zimmerman
> wrote:
> Remember: For every law that is passed there is one less freedom we will
> NEVER get back!!
> There is a movement in this country (the US) that is anti-law and
> anti-government which creates s
My conversion project is at:
http://k7ve.org/blog/2010/06/converting-the-kenwood-tkr-820-to-use-with-d-star/
73 de K7VE
28 matches
Mail list logo