We experienced a similar situation with an VHF repeater
two years ago. The culprit was traced down to rusty bolts
on the Rohn 25 tower. Tapping on the tower legs with a
large hammer would make the problem go away for a short
period of time, but it would return in a few weeks or days.
Finding
Before you put a uhf repeater on the air, you need to
be assigned a frequency by the Mid-America Coordination
Council (MACC). The Nebraska coordinator is John Gebuhr
WB0CMC and he may be contacted at the address listed in
www.qrz.com
He will mail you the required forms and upon successful
Hi Jerry,
I believe it is a CWID-51B. We have the ID chip programmed,
but are having a problem figuring out the terminal strip
assignments on the back. If we can get that information, it
will help out greatly, but if we need to repair the unit later,
the service manual will be of great importance.
Does anyone have a manual for a Control Signal Corporation CWID
Automatic Morse Code Identifier available in .pdf or a link where it
can be viewed?
Thank you,
Frank - WB0QQK
Yahoo! Groups Links
* To visit your group on the web, go to:
As an amateur radio operator and 30 year law enforcement
veteran, I agree with you Lance. After blowing up the
photo of the 1995 Caprice displayed on the jars webpage,
I'm somewhat curious to know why the defendant has an
MPH K-55 mobile radar unit mounted on the dash? I'm sure
it's not for
I'm curious to know if anyone is using a B93 Micor station on two-
meters and what if any modifications are required to make it operate?
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send
6 matches
Mail list logo
