came home with
a bag full of free stuff that people gave him and I think some of it was
because of his enthusiasm and interest. I don't think the future is hopeless
but I do think that youth need more exposure to ham radio and all of its many
aspects.
Jamey Wright WR4JW
Systems Ana
The manuals have been spoken for.
Jamey Wright
WR4JW
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jamey Wright
Sent: Monday, August 16, 2010 7:16 PM
To: 'Repeater-Builder@yahoogroups.com'
Subject: [Repeater-Builder] Motorola Manuals
Maxar 80 136-174 MHz 2/25/55 Watts
Jamey Wright
WR4JW
We use 1/4" superflex in all of our cabinets for 800 MHz systems on the receive
side so at VHF it should work just as well. Plus, there are BNC connectors for
the 1/4" superflex.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
25
specifically on the
10V card had to be changed and I even took a picture of it but it is on my
computer at home. If no one posts an answer, I will look through my notes and
if necessary go look at the repeater and post back tonight or sometime
tomorrow.
Jamey Wright WR4JW
Systems Analyst/EDACS
10v regulator, repeat audio, and repeat card
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AJ
Sent: Monday, June 28, 2010 10:53 AM
To: Repeater
Just a straight thru serial 9 pin serial cable.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
> [EMAIL PROTECTED] On Behalf Of jim
> S
ulated) at the
top of the tower.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> Amen Paul,
>
> In the real commercial radio world... when working on or into
> combiner systems... some people would give their first born to
> have
The last 800 Mhz antennas I bought for our trunking system had DIN
connectors. In fact the particular antenna we use is only available with
DIN connectors now (DB-810). I was at a tower site where a cell site was
being installed and all of the panel antennas had DIN connectors as well.
Jamey
just haven't gotten around to it yet. Kinda sucks but there's always a
warm spot in the room in the winter.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Builder@yahoogroups.com
Best Buy has them here.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
> [EMAIL PROTECTED] On Behalf Of Kerry
> Sent: Monday, January 07, 2008
We installed some here in a City owned facility for public safety use and
the elevator inspector went NUTS. It worked out better for us in the long
run but what a PAIN!
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Mess
Make sure you have the correct bandsplit set in MastrUtl
Jamey Wright
Systems Analyst/EDACS Administrator
EDACS Master Technician
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
> [EMAIL PROTECTED]
I'm using a 450-470 DB-420 on the same pair and it works great.
Jamey Wright
KD4SIY
> -Original Message-
> From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
> [EMAIL PROTECTED] On Behalf Of Jeff
> Sent: Thursday, September 20, 2007 10:30 PM
> To: Repeater-Bui
>From the demo I saw locally, it is near real time. There is some delay but
it is only noticeable if you are close enough to hear the transmitting and
receiving station. I would say it isn't any worse than P25, ProVoice or any
other IMBE/AMBE vocoder.
Just my 2.5 cents
Jamey Wrigh
month; 3/4
of those are data.
For the record though, for my Ham systems, I still run Mastr II repeaters.
Jamey Wright
Systems Analyst/EDACS Administrator
EDACS Master Technician
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Builder@yahoog
panel for programming the DSP card and a DSP card that handles all of
the P25 stuff. For P25 trunking, add a SitePro to the Mastr III. The
SitePro is basically a replacement for the GETC used in EDACS. There are
some differences but they aren't relative to this topic.
Jamey Wright
Systems Ana
o get
one, check www.fmr-inc.com. There are a few stations on there now. Just be
prepared to lay out some big $$$$.
Jamey Wright
Systems Analyst/EDACS Administrator
EDACS Master Technician
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repea
Under 100 bucks for three ground kits and under 300 bucks for the ground
kits, a ground bar, polyphaser, and copper strap. The copper strap is the
most expensive part. Still cheap protection for the time and money invested
in your repeater system.
Jamey Wright
Systems Analyst
Morgan
I'll second that!!
Jamey Wright
KD4SIY
> -Original Message-
> From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
> [EMAIL PROTECTED] On Behalf Of Jeff DePolo
> Sent: Thursday, June 21, 2007 9:56 AM
> To: Repeater-Builder@yahoogroups.com
> Subject: RE: [Rep
Not to mention having to have A/C that can handle the heat load plus the
other 30 transmitters in the building. Especially summer time in Alabama;
100 degrees F with 95% humidity.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Origi
actually getting ready to split the combiner into 2 combiners and run
half of them on one antenna and the rest on another antenna.
Subtract 45 MHz from those freqs and we have those on a RX only antenna with
a tower top amp and then a RX multicoupler in the shelter.
Jamey Wright
Systems Analyst/EDACS
Obviously, you haven't met some of our officers. But in keeping on topic,
60 seconds should be sufficient most of the time.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Builder@yahoogroups.com [mail
#x27;s and
commented that they operate them at 10 watts with no problems. Try that
with one of the older Mastr III or Mastr II PA's.
Jamey Wright
Systems Analyst/EDACS Administrator
Morgan County EMCD 911
Decatur, AL
256-552-0911
> -Original Message-
> From: Repeater-Bu
erting the antenna create any pattern problems or send all of my signal
into the ground?
Thanks for the input.
Jamey Wright
KD4SIY
was riding around with the FM radio turned wy up.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Daron J. Wilson
Sent: Tuesday, February 13, 2007 1:22 PM
To
A shorted transistor in the keying circuit on the 10V Reg card maybe?
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of w4wsm
Sent: Tuesday, February 06, 2007 2:22
It is a straight through DB-9 serial cable.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of mch
Sent: Thursday, January 25, 2007 3:27 AM
To: Repeater-Builder
See this on the FT-5100 http://www.radiomods.co.nz/yaesu/yaesuft5100.html
about half way down the page under CAT/Remote Control Mic
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, AL
256-552-0911
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
x27;t
tried but I think that's the way the DTMF mic sends commands to the radio).
The only snafu is that they didn't include a provision for setting offset
and the radio doesn't do it automatically. Now that I've found the book for
mine, it may be time to do a little more invest
inches long.
Anybody familiar with this unit ar have any specs on it? Its planned use is
to use a single antenna on a full-duplex link.
Thanks
Jamey Wright
KD4SIY
444.325
Eva, AL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Re
Forgot to ask in the first email... What about a part number for the connect
and contacts.
Thanks Eric for the info
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Eric Lemmon
Sent: Saturday, April 01, 2006 11:24 AM
To: Repeater
Anyone have a pinout diagram for the accessory connector on a Kenwood
TK-860?
Jamey Wright
KD4SIY
444.325
Eva, AL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send
Hey Robert! Want another one? I'v got 2 or three.
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Sunday, March 19, 2006 7:19 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] ID
. There are no screws to loosen to allow the conector/loop
assembly to rotate.
Jamey Wright
KD4SIY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Eric Lemmon
Sent: Friday, March 10, 2006 11:40 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [R
loss normal?
Thanks in advance.
Jamey Wright
KD4SIY
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yaho
The occasional walk-off from the Mental hospital next to the 911 Center
where I work. We thimk one even came in and applied for a job, we just
can't prove it. What about brown recluse and black widow spiders?
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroup
I need the pinout for the KCT-19 option cable on a Kenwood TK-860G.
Jamey Wright
KD4SIY
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMA
Make friends with a truck driver
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Maire-Radios
Sent: Friday, January 13, 2006 6:47 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Shipping an antenna
had
usefulness of the TRS or ability to make the microwave link work. We had to
have a structural analysis done to prove we weren't going to cause the tank
to collapse (no, I'm not joking). In the end, we decided to abandon that
idea and are in the process of building our own tower.
Ja
http://www.dbspectra.com Good people to work with.
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Coy Hilton
Sent: Friday, December 30, 2005 6:03 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Decibel
Try
this:
http://www.vega-signaling.com/RadioDispatch/products.nsf/pages/IP-223_Dual_IP_Remote_Adapter_Panel
Jamey Wright
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Mike
PerrymanSent: Wednesday, November 09, 2005 8
There is actually one of tose on eBay right now.
http://cgi.ebay.com/Doug-Hall-4RV-2-Signal-to-Noise-Radio-Voter_W0QQitemZ753
8605980QQcategoryZ46539QQrdZ1QQcmdZViewItem
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Jim B
I block everything except a few used for specialty apps, basic web browsing,
and smtp.
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of STeve Andre'
Sent: Tuesday, August 16, 2005 8:04 PM
To: Repeater-Builder@yahoogroup
I
agree, it is a good article. It explains why you shouldn't use them
instead of just saying "don't use them, they are bad".
Jamey Wright
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Mike Morris
Anyone have a schematic for a Kenwood TM-271A? The one I used for my remote
base got jolted by lightning and needs a little attention.
Jamey Wright
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To
We have done that here with a DB-224 and 3 DB-268s and we seem to have a
pretty good omni pattern. These are side mounted on 6 ft stand-offs on a
Rohn 80 tower.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, Al
256-552-0911
-Original Message-
From: Repeater-Builder
We are on a former AT&T site here and the owner had to have asbestos tiles
removed from the building.
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Rich Garcia
Sent: Friday, July 08, 2005 6:40 PM
To: Repeater-Bui
ers will comment as
well.
Jamey
Wright KD4SIY
Systems
Analyst
Morgan
County EMCD 911
Decatur,
Al
256-552-0911
From: Repeater-Builder@yahoogroups.com [mailto:Repeater-Builder@yahoogroups.com] On Behalf Of Kevin Bednar
Sent: Wednesday, June 29, 2005
1:07 PM
To: Repeater
http://www.qsl.net/kf4tnp/
http://www.mtsh.org/
Not
sure what part of Tennessee you are looking for but these should get you
started.
Jamey Wright
KD4SIY
North Alabama
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
Yes there is. 8 bay VHF with internal harness. There are 3 of them on the
tower here at work. The catch is, they are NLA. I believe the current
model is the DB228. Tessco SKU 494664
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, Al
256-552-0911
-Original Message-
From
Winsock/TCP Error 10060 usually means a connection attempt failed because
the connected party did not properly respond after a period of time, or
established connection failed because connected host has failed to respond.
Jamey Wright
KD4SIY
-Original Message-
From: Repeater-Builder
See here http://vobbe.net/hamradio/wxrad/
Jamey Wright
KD4SIY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Rich Garcia
Sent: Friday, June 10, 2005 4:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Anyone using the
upply.
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Eric Lemmon
Sent: Tuesday, June 07, 2005 9:33 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] RS Astron up to 15 volts, will it be ok
Mathew,
The answ
er
amps at home.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, Al
256-552-0911
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, June 06, 2005 8:01 PM
To: Repeater-Builder@yahoogroups.com
S
r from the PA output
to filter network jumper problem?
Thanks in advance.
Jamey Wright
KD4SIY
444.325
Wilson Mtn/Oden Ridge, Al
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this g
d the trimmer in the ICOM and got it right on freq. If it goes wacko
again I'll check the 10V line first. I may have a 10V card on the verge of
going out to lunch. I have another 10V card out in the shop, maybe I need
to see if it is good.
Jamey Wright
KD4SIY
444.325
Wilson Mtn/Oden
be
causing problems? If so, can someone point me to the easiest was to break
this connection? I don't have the complete manual here. I have tidbits of
it in PDF but not the complete station/repeater manual.
Thanks
Jamey Wright
KD4SIY
444.325
Wilson Mtn/Oden Ridge, Al
Yahoo! Group
Either that or the big white switch on the
power supply (Mastr II, that is)
Jamey
Wright
Systems
Analyst
Morgan
County EMCD 911
Decatur,
Al
256-552-0911
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On
Behalf Of Kevin Custer
Sent: Thursday, May
www.dbspectra.com This is the company that took it over
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Coy Hilton
Sent: Wednesday, May 25, 2005 6:56 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Speaking
Icom 2720 as well
Jamey
Wright
Systems
Analyst
Morgan
County EMCD 911
Decatur,
Al
256-552-0911
From: Repeater-Builder@yahoogroups.com [mailto:Repeater-Builder@yahoogroups.com] On Behalf Of Mathew Quaife
Sent: Thursday, May 19, 2005 11:20
AM
To: Repeater-Builder
$1.93 on the way to work this morning! It was $2.05 last week.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, Al
256-552-0911
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Ken Arck
Sent: Wednesday, May 18, 2005 11:58 AM
Scott, I don't see the antennas link.
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, Al
256-552-0911
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Scott Zimmerman
Sent: Friday, May 13, 2005 1:22 PM
To: Repeater-Bu
BTW,
the tower is a Rohn 80, 320 ft tall. Counting the the wireless companies,
there are 51 antennas on the tower.
Jamey Wright
KD4SIY
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Jamey
WrightSent: Thursday, May 12
back with
paperwork that said "repaired". It's been fine since. OK, so I got a bad
crystal, so what. They repaired it, no questions asked, for free. What
more can you ask for?
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECT
even
survived the remnants of hurricane Ivan when it moved
through.
Jamey Wright KD4SIY
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Lloyd M.
MitchellSent: Thursday, May 12, 2005 8:18 PMTo:
Repeater-Builder
Anybody got a spare notch cavity for 2M sitting around
collecting dust? There is an APRS digi that at my site that desenses my 2M
remote base and it annoys me.
Thanks
Jamey
Wright
Systems
Analyst
Morgan
County EMCD 911
Decatur,
Al
256-552-0911
Yahoo
voter
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Joe Montierth
Sent: Tuesday, May 03, 2005 8:48 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] voting receivers with simulcast
transmitters
The killer on
controlled but is insulated very well and the
temperatures have been pretty mild around here lately.
Thanks
Jamey
Wright
Systems
Analyst
Morgan
County EMCD 911
Decatur,
Al
256-552-0911
Also
KD4SIY
444.325
+
Yahoo! Groups Links
To visit your group on the web, go
I have had few where the TIP-29 was bad. Replaced the 723 and TIP-29 and
solved my problem
Date: Tue, 25 Jan 2005 18:05:45 -0800
From: Mathew Quaife <[EMAIL PROTECTED]>
Subject: RE: Transistor Checking
Well here is the funny part. On one of the supplies, I did indeed find a
bad 3771, but b
I'd rather install a dozen hardline connectors as opposed to one PL-259
Jamey Wright
Systems Analyst
Morgan County EMCD 911
Decatur, Al
256-552-0911
Message: 23
Date: Fri, 17 Dec 2004 12:10:51 -0500
From: "Chuck Kelsey" <[EMAIL PROTECTED]>
Subject:
I have one of the new black voters woth the LEDS. As far as the torroids
go, I don't know for sure. I can check at the local electronics store here
(not Rat Shack) and see if they have them or can get them.
Jamey Wright
Yahoo! Groups Links
<*> To visit your group on the
Jamey Wright
-Original Message-
From: Mike WA6ILQ [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 14, 2004 10:32 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Voters
At 05:13 PM 9/14/04, you wrote:
>A while back, there was some discussion on voters.
Jamey Wright
-Original Message-
From: Q [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 14, 2004 8:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Voters
>It doesnt require any mods to the voter. Use the radio links as
conventional
>except for ins
That way I don't have to do any major mods to the voter. I prefer to run it
the way it was intended.
Jamey Wright
-Original Message-
From: John Sichert [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 14, 2004 7:25 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Rep
is:
Does anyone have a circuit to generate the status tones or know of a
reasonably priced commercially available product. I just don't want to
re-invent the wheel if someone else has already dealt w/ this.
Jamey Wright
KD4SIY
Yahoo! Groups Links
<*> To visit your group on the
tower.
The ground ring at the tower and the one at the building are also tied
together. I know this sounds like a lot, but in the last 4 years, the only
problem I have had from a lightning strike was a tripped breaker on the
circuit that powers the tower top preamp on our trunking system.
Jamey
$79.95 for a 2C (2PPM) ICOM. I have 2 at ICM now getting recrystalled.
Jamey
KD4SIY
-Original Message-
From: Mathew Quaife [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 10, 2004 10:02 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Using an HT for a Transmitter -
78 matches
Mail list logo