I hope some one on the group can help me out here
I want to put a radio in a jeep
the problem is the jeep runs 24 v and as you know radios run 12v
Is there a device that will drop 24v down to 12 vdv ? I know I could use a
droping resistor but I can see it making a lot of heat
if I
when I have run Cat 5e I have run it in conduit ( out side conduit , it screws
together) and never had a problem .. but then again there was no UHF ant
there eather
a little more $$ but it keepts at cat5e safe from the sun/rain/snow/hail ..
On 22 Feb 2008 at 12:57, Ken Arck wrote:
I've
check the harris radio yahoo group also
On 5 Oct 2007 at 10:36, Kim Wells wrote:
Hello to the Groups,
I am looking for a pair of working Harris Intraplex PT-150A PR-150A Cards.
ONLY A version cards.
This is the long name from the user manual
PT-150A/PR-150A
Bandwidth-Efficient Stereo
PL incode will be all the time , the PL disable is the PL DECODE what the
repeater hears,
and what you want to turn off and on .. I have full time incode on my
repeater so I don't have to hear the intermod while I drive past a page'n
tower
Good luck !
Rick
On 28 Mar 2007 at 21:12, Doug
you can allway join the harris radio group I run , we have an retired Harris
person there ..
he is pritty good at answer'n questions on all harris equipment
Rick
On 26 Feb 2007 at 23:26, Jeff Kashinsky wrote:
Cable is RG-142
No shield between the radios yet.
--- In
I looked and could not make headfs or tails of it .. then again it could have
been me :)
Rick
On 22 Jan 2007 at 16:03, Jim B. wrote:
Rick Charlotte wrote:
xc73gs81105b
Info on this model # please
Thanks
Rick
That'll be XC73GSB...
All Motorola radio model numbers
Question for the Moto fan on the list
How hard is it to take a MSR 200 from 154.160 into the ham band lest say
147.300 ?
Repeater is a working pull and was a back up to a FD
The nice thing is I have all the paper work as to what jumpers are in and out
) from Motorola when thay built this
http://www.rtzaudio.com/kg4lne/
He makes a better programmer and WINDOWS software !
I looked at different programmers .. his is by the best IMO
Rick
On 12 Jan 2007 at 12:16, [EMAIL PROTECTED] wrote:
I use a programmer I bought from RFGUYS on Ebay. I have programmed
Phoenix and Rangr radios
to me this does not make sence ... what power do you get out of the
duplexer with a dummy load on ..
I think you have a problem with the ant. I don't see why you would lose so
much power out of the duplexer when you add the 2nd set of dipoles ..
Rick
On 30 May 2006 at 16:55, atms169
if you are loosing 3db in the duplexer then thay are out of wack but you said
thay where tuned ..
2 there is STILL a problem in the coax
3 there could be a problem in the ant connectors
check the specks on the duplexer when you got it tuned it should show you
how much loss and again CHECK
Harris used a Chicago lockco 761
had to pull the key out of the radio to check
On 18 May 2006 at 16:05, Steve Bosshard (NU5D) wrote:
I couldn't resist this one, so please don't take this as nit picking, but
for a purist, the BF10 fits the TPL, Transistorized Progress Line, and the
BF10A fits
I run a Harris Alpha 2000
GREAT radio Fully Duplexed ! and will run 50 watts cont duty all day long !
I have a harris group Ask Roger for more info
he will program and and have the radio go plug and play for you , just add
controller !!
I have 2 unit and thay run great !
I hope this helps
I have the same PS , and it has the relay from Motorola .. so I would
not say Hillbilly engineering ... its used to cut the bats out of the
circuit when the voltage drops and wont let the bat drain all the way
down
I thikn thay where smart in doing that
Rick
On 30 Mar 2006 at 23:38,
I got mine from Ebay and it works great for my ht600
look up my call on ebay and see who I got it from
Rick
On 28 Mar 2006 at 12:12, John wrote:
Try http://www.radiostew.com/index.php
John, K4AG
Bob wrote:
Need rib-box cable to program a Motorola HT-600 anyone got this
forsale ?
try asking the same question in the harris group I run
We havea Harris guru there and he takes care of all my harris
radio (phones)
Good luck , Oh he should be back on the list in the next couple of
days
rick
On 5 Mar 2006 at 0:00, Bernard Gnat wrote:
Thanks Burt, the unit has a lot of
Icom had such a unit that would plug into your handi .. I have one ..
its a parrot repeater .. you talk in , it stores your voice, the out is
comes
also can be used to run a cheap repeater with 2 handies .. or
mobiles if needed ..
great little box to bad thay are hard to find now a days
Thats an easy one ..
to me it looks like my sinclare hybrid ring duplexer but I could be
wrong ..
I thikn the best person to ask would be BOB Morton (ve3bfm) as he
worked for sinclair
just do a goodgel for him on the web .. and post en email
Rick
On 24 Jan 2006 at 13:54, Scott
NO we will not
we lost the same part of the band as you guys did so manny years
ago
it sucks big time but if you don't use it thay will take it away from
you !
On 13 Jan 2006 at 23:15, Q wrote:
According to a TWIAR report,Canadians will be losing the 222mhz
band,FYI...not good news!
ok time to chime in .
there are block heaters that just have a magnet the holds it to the
block ..
if your has a rad there are ones that go on the hose
NOW the item you really want , its a timmer that only turns on the
heater for x number of min IF the temp falls below X deg
No matter if
WOW
I was at a site that was just going up got some 1/2 hardline even
gave me some ends , thay when back to there office and there was
a 100ft piece sitting there and thay brought it up for me .
Yes thay did get there beer . but I went the extra step and got coffie
also .. it was REALLY
We are going to take a trip south the FL along I75
what are the best repeaters to use 144/222/440 ?
with or with out IRLP links
Sorry for the off topic but I would like to have them ready to program
into the radio before we leave !
Thank .. and sorry of the OT post
Rick
There are always things like digital ready, I made sure that was on
the pair of headphones for my portable CD player.
This is a good one .. how is audio 'digital' its not a 1 or a 0 ... its
analog ... just another way to raise the price tag on the same old
stuff ..
ummm I would just
I have one for sale .. if you are still in need Nate ... is a sinclare and
it was just tuned and can give you the graf on the unit
Rick
On 16 Dec 2005 at 20:59, Nate Duehr wrote:
On Dec 16, 2005, at 1:41 PM, Jerry Sanders wrote:
Wacom 220 Duplexer Model WP652. 4 Cavity. Just removed
On 16 Dec 2005 at 20:41, Jerry Sanders wrote:
Henry Radio Solid State Repeater Amplifier. 220 MHZ 1-5 in 100 out,
Rack Mount, Model C100B02R, Full Output, Good working order. $400 +
Shipping from West Coast 93420.
Can we do any better on this price ? like inc shipping ?
any books ?
The Person to ask this question is BOB Morton (hounest bob)
do a google search for him
He was a Sinclair person and still does this work .. he is the one
who made my 220 duplexer
We had a 'mobile' duplexer to him about 3 weeks ago , and he was
able to move it into the 'ham' UHF band for us
I know this is a little off topic but I don't know what group emailed
me the setup for a KPC 3+ for APRSI missplaced the email and
file
Can you please send to me again
Thanks
Rick
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
http://ftp.fcc.gov/oet/info/maps/canline/canline.html
for a map of the lines
On 27 Nov 2005 at 18:41, Richard wrote:
http://ftp.fcc.gov/oet/info/maps/canline/linea.html
And
http://ftp.fcc.gov/oet/info/maps/canline/
Richard, N7TGB
-Original Message-
From:
http://groups.yahoo.com/group/harris-radio/
On 9 Nov 2005 at 13:18, Joel wrote:
Hi can you send me the web address for this harris group? I'm running
out of patient, I will appreciate it very much, thank you Rick
Charlotte. - Original Message - From: Rick Charlotte
[EMAIL
On 8 Nov 2005 at 19:14, v44kaiy wrote:
Hi one and all, my name is Joel and my call is v44kai I'm from St.
Kitts in the Caribbean. I have been reading the board for sometime,
and I must say, there are many well experience repeater wi on this
post. so I will like to express my
WOW that bring back mem's of the good ol days .. loved that show
to bad I have not been able to catch it in reruns :( ..
would love the whole sound track if I remember right there was a lot
of 'sound' before the voice came out ..
Rick
On 8 Aug 2005 at 21:52, Chuck Kelsey wrote:
It's
if Ken is say'n $100 I will offer you $200 Inc Shipping
On 22 Jun 2005 at 12:16, Ken Arck wrote:
At 03:05 PM 6/22/2005 EDT, you wrote:
Both look brand new out of the box. I have a decision to make which
one to sell and for how much. Any suggestions?
---You should sell the 1600
On 14 Jun 2005 at 19:23, Don wrote:
With the 80 Going into
the Duplexer I get about 62 Watts at out at the Ant
I would like to see about 100 Watts at the Ant
some people do not read at all ..
I think if you up the power and do get 39 more watts to the ant that
could make a verry
let us know how it works out .. don't forget ever watt you can get up
there you get a ' 7db gain' .. so the 20 odd watss should make a
difference
Rick
On 14 Jun 2005 at 16:06, KA9QJG wrote:
Well I thought it would Make a difference Too, I was Just asking the
Best way to Set the Exciter,
Your Right Ken .. this could be all for nothing ..
but if you don't take the time to try you will not learn .. and maybe all
he needs is a couple of watts to just give them enough sig in the mill
for them to RX better ..
never know untill you play and learn ! .. and 220 is a fun band to
play
We use a bridge rec and an resistor for bat back up ..
as skopp notes the resistor is for current limitting .. so the PS does
not take a jolt if the battas are low
I will see if I can find the drawing and post ot the group .. if not I will
do another and post
nice thing is you can put this
go to the IRLP website .. look under radios ..
you will find all the info you need to intrerface the radio to your
controller
http://www.irlp.net/pnp-radio-pinouts.html
other radios are listed also .. look down little and you will find the
info you need
Rick
On 18 May 2005 at 11:57,
I did ... I will see what I can do to bring it into the puter this week
some time .
poor kids did not even have a chance .. did any one copy it ?? and
what speed was he sending ?
Rick
On 14 May 2005 at 4:04, Ronny wrote:
It is for these guys! What a show! I don't think those two kids
Try West Crystals ( In Canada).. I have verry goo luck with them
and you get a bigger bang for your buck
Rick
On 28 Apr 2005 at 16:23, Chris Peterson wrote:
Hi all,
I just tried to call Channel Element Headquarters to get a channel
element for a UHF Micor and I'm told there is just no
your wrong Kevin . thay do .. you just have to ask .. our UHF mircor
has xtals from them and thay are .. thay work fine .. and we use the
100% in the shop with not a problem
On 29 Apr 2005 at 14:40, Kevin Custer wrote:
At 4/28/2005 04:00 PM, you wrote:
try West Crystals
I have
I don't know .. but when I asked for it to be done .. thay said no
problem and we have never had a problem .. could be because
we (the shop) does a lot of work with them I guess .. I know I am
going to be ordering some xtals for my clegg and midland 220 from
then next week
On 29 Apr
Just got off the phone with West Crystals
to do temperature compensate
any Xtal .. and want to know the
price ..
a WHOLE extra $1.00 .. or to you US guys .. a WHOLE extra $.80
or so .. :)
Just ordered xtals form my Clegg 220
Rick
try West Crystals
I have had verry good luck with them
Thay might just have what your looking for ,, and thay are in Canada
so your USD will go feather too !
good luck
Rick
On 28 Apr 2005 at 17:50, Doug Bade wrote:
At 05:23 PM 4/28/2005, you wrote:
Hi all,
I just tried to call
for all the good stuff I would go with IRLP
Clock, converts text to speech for weather and a whole lot more ..
Rick
On 15 Apr 2005 at 22:50, geodude2010 wrote:
All that does is id a repater and send messages. It doesnt have a
clock or any thing goodor does it?
--- In
, geodude2010 wrote:
Is there a windows version?
--- In Repeater-Builder@yahoogroups.com, Rick Charlotte
[EMAIL PROTECTED] wrote:
for all the good stuff I would go with IRLP
Clock, converts text to speech for weather and a whole lot more ..
Rick
Yahoo! Groups
is there a spot that I could grab 4.5v off the micor back plane ..
I need to drive a bias boad with 4.5v and wonder if there is a SAFE
spot to grab this ?
I know I could build a reg for ti but I would rather keep this simple
Thanks for any and all help in this matter
Rick
volts only.
- Original Message -
From: Rick Charlotte [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com; [EMAIL PROTECTED];
[EMAIL PROTECTED] Sent: Thursday, April 14, 2005 3:06 PM
Subject: [Repeater-Builder] 4.5v off Micor back plane
is there a spot that I could
the ony one posting like crazy is you .. at least Russ stoped ..
On 25 Mar 2005 at 10:37, [EMAIL PROTECTED] wrote:
You mite be next with the thought police!
Think about it.
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP Node 2120
If you do, or know of anyone I could contact, I'm looking for any of the
following models;
T51 (60 Watt) with chassis HUB1002B, HUB1022B, HUB1004B, HUB1024B
T81 (110 Watt) with chassis HUB1012B,HUB1032B, HUB1014B, HUB1034B
again this is fpr a school project and have verry little funds
at this
I am running one of these amps right now
with around 100mw drive I am getting around 55 watts at 224.420
stable output with no spurs
I did not need to do a lot of mods at this point I use the controller to
run the PTT on the amp as there is no RF switch to do this funtion
on the amp itself
== MM-100E multi-function lid
do you have the manual for the above ?? I need it for the meter
that's in the lid ( I do belive its the mm 100E)
if any one has that would be great . .
Thanks for any and all help
Rick
Rick Szajkowski VA3 RZS
Charlotte Darby VA3
AND DONT FORGET GROUND KITS !
you need at least 3 .. one at top one and the bottom before the bend
and one before it enters the building !( as per andrews) I also did
the same but mine is only 80 ft long at 100 ft I would put one at the
50ft mark also but that's just me and the kits cost
Hello all .. sorry for the x post but I need some help on this product
SCT 110
This is a 220 TX
any onw know this beast ?
this is the Exciter part of the set .. we have removed the PA part to
put into our 220 repeater but would like to kow what drive curent
this puts out for the PA and
ago that the 222Mhz output was only around 50 watts.
Ironically, I have an SCT110 and PA going on the bench in a few days
that I am going to be testing before I put it on sale. I can confirm
this if you want.
73, Joe, k1ike
Rick Charlotte [EMAIL PROTECTED] wrote
http://www.spantek.on.ca/
check them out might have what your looking for
Rick
On 19 Feb 2005 at 22:51, Leonard Goodnow wrote:
Does any have or know of any company tha sells used VHF duplexers?
Len
Yahoo! Groups Links
--
No virus found in
Hello all I am looking for an incoder for a micor base station ( the
one that the cards go into )
need PL of 162.2
again just need the INCODER and PL
Thanks verry much for any and all help
Rick
Rick Szajkowski VA3 RZS
Charlotte Darby VA3 CMR
Node Owners of IRLP
55 matches
Mail list logo
