PL incode will be all the time , the PL disable is the PL DECODE what the repeater hears,
and what you want to turn off and on .. I have full time incode on my repeater so I don't have to hear the intermod while I drive past a page'n tower Good luck ! Rick On 28 Mar 2007 at 21:12, Doug wrote: > I have just about completed setting up the MSR2000 as per the > article by K4HAL and WA6ILQ > and it appears to work just great. I have to interface it to the 7k > and Doug Hall interface and > it will be ready to go. All the cabling is done. The only option > cards left in are the TOT and > the Station Control card. > > However, when I key the radio, it appears the pl tone is being > transmitted all the time. The > PL DISABLE switch has no affect on it. Is this normal?? It seems > unusual to me, but I don't > think it will hurt the operation. I can kill it if I ground pin 14 of > the pl board which is > a dual tone board. However, I want to be able to control the pl > operation via the 7K. There > are times when it would be useful. Does anyone have any ideas on this tone?? > > Thanks > > 73 > Doug VE5DA > > Of all the intelligent animals, Human is the species that is least likely to learn from its experience. That explains why so manny of us have more then one Border Collie ! == www.karolinabc.ca == Rick,Charlote & Kids Our Border Collies Miss Daisy Duke Sir Red-A-Lot Miss Elly May Mr Boots Mr. Balue Our Border Collie Message Group [EMAIL PROTECTED]
