[Repeater-Builder] Mastr 2 H-Split Pa's Vhf $$$$$$$$??????????

Hi all i am cleaning here the garage. how much the value on the market of Master 2 H-Split Pa? i have no idea what it is today? thanks Gervais ve2ckn

Re: [Repeater-Builder] Pager interference

a radio site (ofter in the 140 mhz)many problems will occured BUT it always the competence of the tech that must be in consideration also. you always have for what you pay. 73/s all gervais ve2ckn . .. From: Jim in Waco WB5OXQ Sent: Saturday, August 07, 2010 5:07 PM To: Repeater-Bui

Re: [Repeater-Builder] Give Away - Motorola Micor VHF/UHF Mobiles & GE Low Band Mobiles

hummm we are so far we would have used this Motorola Micor VHF mobile converted to a 147.080MHz repeater here 73/s all gervais ve2ckn From: Dave Cochran Sent: Saturday, July 31, 2010 9:00 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Give Away - Motorola Micor

[Repeater-Builder] Micor HD,PA install over an Master 2

picture it would be 125% best thanks 73/s Gervais ve2ckn

Re: [Repeater-Builder] Re: MII station PA VHF

to bad iam so far from you i have 4 or 5 high split PA that i dont need. i would exchange certainly some for an low split vhf 73/s all gervais ve2ckn -- From: "terry_wx3m" Sent: Tuesday, June 15, 2010 6:52 PM To: Subject: [Repeat

Re: [Repeater-Builder] Micor Big PA,what drive?

Thanks From: Captainlance Sent: Wednesday, March 24, 2010 11:56 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Micor Big PA,what drive? UHF take 1.5 watts, VHF 450mw. - Original Message - From: gervais To: Repeater-Builder@yahoogroups.com Sent

[Repeater-Builder] Micor Big PA,what drive?

Gervais ve2ckn

Re: [Repeater-Builder] OT,,some gel on board!!!!!!!!!!!!

Hi Kevin some of the stuff are harder then others . the rectifier on my skidoo is using an harder stuff than a gel compound,,, i will check in my dictionnary for the translation of your MEK . thanks many times gervais ve2ckn From: kevin valentino Sent: Sunday, March 07, 2010 10

[Repeater-Builder] OT,,some gel on board!!!!!!!!!!!!

talking about ,? i dont remember what it was. thanks for your help i need it to repair my board,,,if i can 73/s gervais ve2ckn

[Repeater-Builder] Motorola MSR2000 VHF Element??

hi all i am looking for a set of used channell element for my MSR2000 VHF. it could be in the 147 mhz ,receive and tx please. thanks for your help. 73/s gervais ve2ckn

Re: [Repeater-Builder] Master 2 and DCS

humm Doug i thaught it would simpler for me too install this board,,, i wonder if the little TKR-720 of Kenwood can do DCS??? Thanks for your observation gervais ve2ckn -- From: "Doug Bade" Sent: Saturday, February 06, 2010 3:04 PM To

[Repeater-Builder] Master 2 and DCS

hi all my master 2 repeater has a tone of 141.3 hz. i remember that when i programm my Phoenix i can setup a DCS tone ,Digital code. Is there a board that you slot into the Master 2 so it could use a DCS ? thanks Gervais ve2ckn

Re: [Repeater-Builder] Re: UHF MSR2000 low split to ham band

Good Éric good lucfor your repeair. 73/s all Gervais ve2ckn From: va...@securenet.net Sent: Tuesday, January 26, 2010 3:27 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: UHF MSR2000 low split to ham band Its not just for ham equipment, its everything

Re: [Repeater-Builder] Re: UHF MSR2000 low split to ham band

from HK it would reach me in 6 or 8 days and from newYork it may too 20 too 30 days i have seen,,nothing to understand . so yes usps is great at least to us ham radio operator when we are doing trade. 73/s all gervais ve2ckn From: va...@securenet.net Sent: Tuesday, January 26, 2010

Re: [Repeater-Builder] Kenwood repeaters

emote site,3000 feets high,and 120 milles from me . i dont need power . it does not looks like Ken brochure,it is older then this one. i will try to have a picture and put it on my web site thanks for your comments and suggestions as always appreciated ge

[Repeater-Builder] Kenwood repeaters

kenwood? i dont need power anymore that is why i am bargainning this big 100 watts master 2 for the little one. 73/s all and thanks for the help gervais ve2ckn <>

Re: [Repeater-Builder] Celwave/Sinclair, etc. antenna conversion to 2-Meters?

gervais ve2ckn -- From: "larryjspamme...@teleport.com" Sent: Friday, January 15, 2010 10:40 PM To: Subject: [Repeater-Builder] Celwave/Sinclair, etc. antenna conversion to 2-Meters? > Several years ago, I found an article on the i

Re: [Repeater-Builder] Any Repeaters Taken Off Air Permanently?

well i can read all those bad news and in my area i could use an UHF repeater for experimentation here on VOIP and more maybe. It's too bad again. we are near by the Internet but far from mail , 73/s all best 2010 to all and your project. gervais ve2ckn From: va...@securenet.net

Re: [Repeater-Builder] Re: Time for GOD

Richard your web site is great,and the pictures too 73/s gervais ve2ckn From: James Adkins Sent: Saturday, November 21, 2009 8:36 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: Time for GOD We do still have freedom of speech and freedom of religion in this

Re: [Repeater-Builder] COR board for simple repeater??

Hi all i am trying to establish contact with the builder of this interface, i sent an email and no response. Is there someone that could help me please ? There must be the barrier of language here as for me too,,, Anyway ,help is welcome here from me 73/s all Gervais,Ve2ckn bic,Quebec From

Re: [Repeater-Builder] COR board for simple repeater??

Azman send me an email personnal ok ve2...@hotmail.com about this web site owner thanks many time for your help it is appreciated at 100% here gervais ve2ckn bic,quebec From: Azman Ismail Sent: Wednesday, September 02, 2009 10:46 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater

Re: [Repeater-Builder] COR board for simple repeater??

hi Daniel i sent an email at HS9DMC ,maybe he will answer me thanks again ,it helped me a lot gervais ve2ckn -- From: "D. Daniel McGlothin, KB3MUN" Sent: Thursday, September 03, 2009 7:19 AM To: Subject: Re: [Repeater-Builder] COR

Re: [Repeater-Builder] COR board for simple repeater??

better then nothing,in emergency telecom every contribution is welcome. Again thanks for your understanding Gervais ve2ckn -- From: "D. Daniel McGlothin, KB3MUN" Sent: Thursday, September 03, 2009 7:19 PM To: Subject: Re: [Repeater-Bu

Re: [Repeater-Builder] COR board for simple repeater??

Well Daniel it helped me a lot i can see the little interface between the 2 portable radios it is what i need,but he is not using the 2 connectors on the radio, the mic and speaker thanks gervais ve2ckn -- From: "D. Daniel McGlothin, K

Re: [Repeater-Builder] COR board for simple repeater??

Hi Azman well i have checked the web site, it is written in a language that i dont understand,, i only see pictogramm ,,,it must be the letters. but thanks anyway it was appreciated gervais ve2ckn From: Azman Ismail Sent: Wednesday, September 02, 2009 10:46 PM To: Repeater-Builder

[Repeater-Builder] COR board for simple repeater??

ere i could find such a board,,,controler what ever you call it,no need for queue,,,just a simple repeater. thanks Gervais ve2ckn

Re: [Repeater-Builder] ANDREW 7/8 Hardline Question

cold weather but it is 50 ohms impedance. i used it in the wood for remote area site . 73/s all Gervais ve2ckn -- From: "Eric Lemmon" Sent: Sunday, August 16, 2009 2:18 PM To: Subject: RE: [Repeater-Builder] ANDREW 7/8 Hardlin

Re: [Repeater-Builder] ANDREW 7/8 Hardline Question

Eric this is not the LDF5 ??? Gervais -- From: "Eric Lemmon" Sent: Sunday, August 16, 2009 12:30 PM To: Subject: RE: [Repeater-Builder] ANDREW 7/8 Hardline Question > Brian, > > This may be a special product, made fo

[Repeater-Builder] Diode in a Ge Master 2 PS

neway voltage " between my battery and the alternator,,, i hope that you can gave me a hand thanks gervais ev2ckn

Re: [Repeater-Builder] TLD-1694E Micor PA

ok i did not knew that you could have 100 watts mobile,,, my are HD big Micor repeater used on pagers unit,,, if only i could recycle them on my Master 2 73/s Scott Gervais ve2ckn -- From: "Scott Zimmerman" Sent: Wednesday, August

Re: [Repeater-Builder] TLD-1694E Micor PA

Scott is this a 100 watts + PA,HD version ? gervais ve2ckn -- From: "Scott Zimmerman" Sent: Wednesday, August 12, 2009 11:44 AM To: Subject: Re: [Repeater-Builder] TLD-1694E Micor PA > Instead of going through all of that trouble,

Re: [Repeater-Builder] MSR-2000 and External Controllers - Repeater - Telephone (auto-patch)

$ very expensive i would prefer do some work myself if i can ,you understand. Anyway thanks for your mail. Gervais ve2ckn -- From: "skipp025" Sent: Friday, August 07, 2009 3:57 PM To: Subject: [Repeater-Builder] MSR-2000 and External C

Re: [Repeater-Builder] MSR-2000 and External Controllers - Repeater - Telephone (auto-patch)

$ very expensive i would prefer do some work myself if i can ,you understand. Anyway thanks for your mail. Gervais ve2ckn -- From: "skipp025" Sent: Friday, August 07, 2009 3:57 PM To: Subject: [Repeater-Builder] MSR-2000 and External C

Re: [Repeater-Builder] Re: Looking for desktrack info

expert on matorola i must say,,even an expert at all :-))) just a radio-amateur playing with his equipment and trying to understand what he is doing :-))) 73/s Eric Gervais ve2ckn -- From: "Eric Lemmon" Sent: Friday, August 07, 2009 1

Re: [Repeater-Builder] Re: Looking for desktrack info

Hi all anywone have a picture of these "desktrack" radio's please these are big,heavy,,right???? 73/s gervais ve2ckn -- From: "motarolla_doctor" Sent: Thursday, August 06, 2009 7:31 PM To: Subject: [Repeater-Builder]

Re: [Repeater-Builder] phonepatch for Master 2

Thanks Chris for the QSP i will check on the web again thanks gervais ve2ckn -- From: "Chris Curtis" Sent: Sunday, July 26, 2009 6:33 PM To: Subject: RE: [Repeater-Builder] phonepatch for Master 2 > I used a CSI private patch V for

[Repeater-Builder] phonepatch for Master 2

hi all i am looking for the simplest phonepatch i could install on my master 2 repeater cabinet. i dont need fancy option. just open and close the line,that's it! do you have any suggestion thanks gervais ve2ckn

[Repeater-Builder] 40 watts MAster 2 PA wanted

hi all, i am looking ofr a Vhf Low Split 40 watts PA for my master 2. i dont need the heat sink i already have one dead that i will dismantle. maybe someone have a 40 watts that would not be too much $$$ for me . thanks ve2ckn

Re: [Repeater-Builder] Sinclair - big price jump?

is my personnal choice from my experiences.it is like putting a capacitor at 125 feets high and transmit 73/s all gervais,ve2ckn From: Eric Grabowski Sent: Wednesday, June 03, 2009 1:13 AM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Sinclair - big price jump

Re: [Repeater-Builder] Sinclair dipole array premature failure (noisy)

yes Chuck they are ex:engineer from Sinclair and they start thir company many years ago,i have done business with them,they are professionnal as Sinclair. 73/s gervais ve2ckn -- From: "Chuck Kelsey" Sent: Tuesday, May 19, 2009 6:23 PM To

Re: [Repeater-Builder] Sinclair dipole array premature failure (noisy)

humm maybe o/t sinclair antenna has not be solded to comprod antenna sometime ago 73/s all gervais ve2ckn -- From: "Nate Duehr" Sent: Tuesday, May 19, 2009 5:04 PM To: Subject: Re: [Repeater-Builder] Sinclair dipole array prematu

Re: [Repeater-Builder] MVP or his cousin!!

They are fit inside ,they are about 4 inch long 1 inch thick 6 inch long like a cigarette pack gervais ve2ckn From: Chuck Kelsey Sent: Saturday, April 11, 2009 6:09 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] MVP or his cousin!! Where did they fit a small

Re: [Repeater-Builder] MVP or his cousin!!

hu i dont think so John they were made in Canada ,,,too my knowledge for canadian user but you never know. they were used as link radios for a phone patch system here . 73/s gervais ve2ckn From: G7ooe Sent: Saturday, April 11, 2009 12:07 PM To: Repeater-Builder@yahoogroups.com Subject

Re: [Repeater-Builder] MVP or his cousin!!

ok Eric well they look heavy duty too me , anyway i dont have any use for them ,i prefer using Phoenix for my Aprs and Packet needs. Maybe someone will need them and they would have a 2 nd life. Again thanks for the information you supply me 73/s gervais ve2ckn

Re: [Repeater-Builder] MVP or his cousin!!

eric here what i can read on the back plate of the radio: Eu-CT56AAS66A KT-134-A ER-92-A Serial 8020633 inside there are those Duplexer res-Lok Model SD-220 Serial Q3242-43 receive 152.66 tx is 157.950 can it help? gervais ve2ckn -- From

Re: [Repeater-Builder] MVP or his cousin!!

ok Éric i will be back with what you need for identification. qrx gervais ve2ckn -- From: "Eric Lemmon" Sent: Friday, April 10, 2009 11:01 AM To: Subject: RE: [Repeater-Builder] MVP or his cousin!! > Gervais, > > What is the m

[Repeater-Builder] MVP or his cousin!!

So i still have them too spare. i cannot say they are not working but because they were use on a phone link system i assume they are ok. so let me know your interest ,they are heavy remember. my postal code is G0L-1B0 in Quebec . 73/s Gervais ve2ckn

[Repeater-Builder] Micor repeater channell element ????

hi all i am looking for a pair of used channell element for my Micor repeater,it is the big cabinet,125 watts output. Before i order a set of crystals maybe i can find a set here in the group. thanks for your help tx 145.450 rx 144.850 gervais ve2ckn

Re: [Repeater-Builder] Replacing an ge master 2 PA by an Moto 100 watts HD

Bonsoir Éric, yes i made an error here,, thanks gervais From: Eric Vincent Sent: Wednesday, April 01, 2009 10:27 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Replacing an ge master 2 PA by an Moto 100 watts HD Hello Gervais, Look for MASTR not master, it&#

Re: [Repeater-Builder] Replacing an ge master 2 PA by an Moto 100 watts HD

Well thanks Mike i am not an expert of "how to search on Ebay" i have received another email that i should look for Master i may have found a used PA board ,i will check tonight. Again thanks Mike gervais ve2ckn From: Mike DeWaele Sent: Wednesday, April 01, 2009 7:50 AM To

Re: [Repeater-Builder] Replacing an ge master 2 PA by an Moto 100 watts HD

be a company to be able to bet on it. i will be waiting here ,maybe will have some mores messages on this. 73/s thanks gervais ve2ckn From: Jim Cicirello Sent: Wednesday, April 01, 2009 12:09 AM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Replacing an ge master 2 PA

[Repeater-Builder] Replacing an ge master 2 PA by an Moto 100 watts HD

Hi all is there anyone outhere that ever done this? exchange an Master 2 ,100 watts PA for an big HD PA from an MIcor repeater ??? i have many big HD PA for the Micor and if only i could fit one on my MAster 2 i would be happy! thanks for your help gervais ve2ckn

[Repeater-Builder] Re: master 2 Pa board

--- In Repeater-Builder@yahoogroups.com, "gervais" wrote: > > Hi > well i has been many years since reproducing the Shuttle audio from my > Master 2 repeater but i think my PA is dead now,,, > no more output,i just transmit by the exiter ))) > i am looking for

[Repeater-Builder] master 2 Pa board

,mine was an 110 or 120 watts i dont recall let me know ok, the rest of my PA may serve me as parts if you have one or know where there is one just send an email thanks for your help gervais ve2ckn <>

Re: [Repeater-Builder] Vertical Antenna

Hi all is the CP-5 still on sale ??today from diamond 73/s gervais ve2ckn From: vr2 xvd Sent: Saturday, March 28, 2009 10:56 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Vertical Antenna Is it brand name : Diamond from Japan ? Model : CP-5 ? 73s! de VR2XVD

Re: [Repeater-Builder] Re: Help with intermod between repeaters.

Joe you dont have any PL tone???on your repeaters gervais ve2ckn -- From: "wa5luy" Sent: Sunday, February 15, 2009 8:15 AM To: Subject: [Repeater-Builder] Re: Help with intermod between repeaters. > Thanks to all for your replie

[Repeater-Builder] 2x Zetron 36B phone link base

hi too all i have 2 Zetron here 36B phone Link Base with OEM manual anyone interested send me an email direct before i go on Ebay i prefer to let it go in the communauty of hamradio 73/s gervais ve2ckn ve2...@hotmail.com <mailto:ve2...@hotmail.com>

[Repeater-Builder] Cabling back too back 2 Ge Phoenix

hi all,i am searching for a diagramm,cabling,of 2 ge Phoenix cabled together as Back Too back, one UHF and another VHF ,anyone have one of these kit? i need the shematic, can you help me thanks again gervais ve2ckn

RE: [Repeater-Builder] Sinclair q202gc duplexers

Hi all if i may add, we did retune a set of Q202 from the 152 + mhz to the ham band whitout working on the cable, we tried it and it when no1 maybe he should ry it first and see what happen sugestion!! 73/s gervais ve2ckn To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Sun, 23 Nov 2008 04:29:22

RE: [Repeater-Builder] Master 2 vhf and a link radio Uhf,How???

JIm these are great files for me and my project, by chance would you have some pictures of this board by chances?? Again you help is mostly appreciated by me thanks Gervais ve2ckn To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Fri, 21 Nov 2008 16:41:36 -0800Subject: Re

[Repeater-Builder] Master 2 vhf and a link radio Uhf,How???

"enter" via the uhf link radio. can it be done in a simplest way. i dont need cw id since i already have one on the vhf side so it would tx on uhf too. can you help me ?? thanks all gervais ve2ckn le bic,quebec _

RE: [Repeater-Builder] Re: 10 Volt regulator control from an master 2,i need a piece!!!!!!!!!

well i googled with 19A116375-1 not much chance yet,it is an TO-220 style regulator,,,i am not sure thanks anyway for your suggestion, gervais ve2ckn

[Repeater-Builder] 10 Volt regulator control from an master 2,i need a piece!!!!!!!!!

an TO-220 style components can you help me again please?? thanks again,mostly apprecitated 73/s gervais ve2ckn

RE: [Repeater-Builder] Modifications for An Micor Repeater VHf/Uhf

help.i need to install an heavy duty repeater over a mountain and i dont want to to there every week end,by what i can see #i shell be in business# Gervais ve2ckn

RE: [Repeater-Builder] Modifications for An Micor Repeater VHf/Uhf

Éric well you gave me some indications there,thanks. i will check my unit, i can see 6 or 8 cards on her too, let me check i will be back. thanks again. i may take some pictures too if needed 73/s gervais,Ve2ckn

[Repeater-Builder] Modifications for An Micor Repeater VHf/Uhf

convert it for ham use??? oh yes it is an Heavy Duty 100 + watts output. thanks all for your guidance as always appreciated. gervais ve2ckn _

RE: [Repeater-Builder] Master 2 card!!!!!!!!!!!!!!i need one

Ok Ed i will try your suggestion thanks Gervais ve2ckn

RE: [Repeater-Builder] Master 2 card!!!!!!!!!!!!!!i need one

Yes Daron,i need the whole card,mine has been stolen !! Ge parts are becoming rare here,i still have an old motorola micor here,receiving in uhf tx is low split vhf i may modify it for ham use. 73/s Daron gervais ve2ckn To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Tue, 14 Oct

[Repeater-Builder] Master 2 card!!!!!!!!!!!!!!i need one

hi all how can i search on Ebay for the Master 2 repeater?? i have try many combinaison,,,no luck. i need the SOR card (PL19D417271g1)and the 10 volts regulator card. i need to repair the repeater fast,,,snow will come over the site in 3 weeks max 73/s gervais ve2ckn _

[Repeater-Builder] Phone patch for Master 2,which one???

for the phone patch . thanks for your advise group,it will be appreciated,by the way is there a web site for some parts, i need a receiver and his exiter too,,vhf low split. again thanks gervais ve2ckn

[Repeater-Builder] Master 2 ,PA,Pictures of a broken link!!

you very much gervais ev2ckn

[Repeater-Builder] Exchange 2 PA'S,i need a GE

Hi all i need another PA for my Master 2 VHF, i have a Heavy Duty Micor 125 Watts ,really big, i would exchanger it for an 115 watts GE MAster 2 anyone interested,i can send pictures gervais ve2ckn ps my master is dead, _

[Repeater-Builder] Master 2 PA's and more,i need some informations

st it in the 145 mhz with just 20 watts input???i need some informations on them and this is rare ! thanks for your help,i will really appreciate gervais ve2ckn _

[Repeater-Builder] Duplexers vhf

hi all i have 3 little duplexers sinclair sd-220 rx 152.660 tx 157.950 if someone is interested send me an email direct please 73/s make me an offer will see,i dont need them as their GE radio connected too. gervais ve2ckn

RE: [Repeater-Builder] Ge Mobile MVP !!!!

yes and H-Duty too. To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Wed, 3 Sep 2008 20:40:51 -0400Subject: Re: [Repeater-Builder] Ge Mobile MVP nice little units. gervais wrote: well i have 3 GE radios here with 3 Little Sinclair Duplexer insidethem,they were used as a phone patch link

[Repeater-Builder] Ge Mobile MVP !!!!

link base with OEM manual you can send me an email at [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> 73/s Gervais,Ve2ckn.

RE: [Repeater-Builder] Diamond X-50 NA

i used one for packet and aprs,on vhf. it is good antenna i didnot expect to perform so much anyway,thats a question of size too but this is an honest antenna how much watts do you want to apply? gervais ve2ckn

[Repeater-Builder] Kenwood TKR720 type 2

thanks all gervais ve2ckn _

RE: [Repeater-Builder] UHF Micor repeater equipment for sale

hi John http://www.findu.com/cgi-bin/find.cgi?call=ve2ckn and it is "wood winter time" here,:-) gervais,ve2ckn To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Sun, 24 Aug 2008 16:43:47 -0400Subject: Re: [Repeater-Builder] UHF Micor repeater equipment for sale Gervais, and where

RE: [Repeater-Builder] UHF Micor repeater equipment for sale

Too bad Glen you are so far from me, i need an uhf repeater here,even built with 2 mobile radios. it would have been what i need on the mountain i must have one as a relay here 73/s good luck in your sale gervais ve2ckn

RE: [Repeater-Builder] Sinclair antennas suggestions

If you contact Comprod,we have done business with them and they gave us a price as radio-amateur. it depends on what antenna you need too. And they gave great support after we baught it! 73/s gervais ve2ckn

[Repeater-Builder] 2x= Zetron 36B

hi all i have 2 Zetron 36B Phone link base with OEM manual. would exchange them for an NHRC-3/M2+ for my Master 2 or something equivalent. 73/s all gervais ve2ckn _

RE: [Repeater-Builder] china made radios

Many buy them for APRS cheap radio's and they last , many are years back in techno but they do the job we ask them to do. you always have for what you pay,these are not Yeasu or Kenwood,,,or Motorola. the warranty,hey hey ,,,30 feets or 30 days,,,first coming :-) ge

[Repeater-Builder] 3x - Duplexers Sinclair SD-220,,,,2x Zetron 36B

radio 73/s Gervais ve2ckn 73/s

[Repeater-Builder] Re: Zetron 38B ,their value???

t; prices for a used unit. If you're just playing around or > experimenting the price is what someone is willing to pay. > > I bought a similar unit off Ebay for $25 (no paperwork) and finding > the Manual was another 3 weeks and $25. But it does the job just > fine...

[Repeater-Builder] 2x-Zetron 36B Phone Link to sale

enter on my repeater,,you see. so i would bargain my Zetron for one,again i am not an expert so i still trust the honesty of radio-amateur. ps i can send some pictures 73/s Gervais ve2ckn

[Repeater-Builder] Zetron 38B ,their value???

hi what is the value for 2 Zetron 36B,Phone Link (whit the documentation OEM) i need your advise ,, gervais ve2ckn

RE: [Repeater-Builder] FS: Micor channel elements

steve i am interested send me an email direct at [EMAIL PROTECTED] thnaks gervais,ve2ckn le bic,quebec

RE: [Repeater-Builder] Folded Diploles or Vertical antenna?

now!! gervais ve2ckn

RE: [Repeater-Builder] Folded Diploles or Vertical antenna?

anytime ,the vertical,because of the fiberglass coting will degrade also after time ,,,it is a consideration to be made ,,,if you dont want to climb in the tower every 6 month to check it. you explanation are good Nate ,and clear too. 73/s all gervais ve2ckn

RE: [Repeater-Builder] How much drive power for Micor HD PA ??

there is some Ppot's to balance them and adjust the tx power to about 80-90 watts so it will be set on save mode. Gervais To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Wed, 21 May 2008 20:27:54 -0700Subject: Re: [Repeater-Builder] How much drive power for Micor HD PA ?? Not sure what you

[Repeater-Builder] GE Radios to sale !!!!

send me an email, if no response,fryday they are going to be recycle locally in a school in the radio Dept as cobaye for the students!!!:-) 73/s Gervais ve2ckn

[Repeater-Builder] How much drive power for Micor HD PA ??

Hi all well i have some Big Micor 12? watts VHF PA here that i want to fit locally, i need to know what is the max and min power input needed to drive those pa? to drive them i have 350 mw,is it ok? thanks for your help gervais ve2ckn

RE: [Repeater-Builder] GE MASTR II cards and modules

Jordan would you have 2 or 4 channel elements of Master 2,Vhf low split 73/s Gevrais ve2ckn To: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Thu, 15 May 2008 08:39:23 -0400Subject: Re: [Repeater-Builder] GE MASTR II cards and modules let me check with the two guys I know who two Mastr II wor

RE: [Repeater-Builder] RG-214 N-Type Crimp Sleeves

Ken i am insterested too,,, all i found here is cheap imported sleeve . 73/s Gervais,VE2CKN

RE: [Repeater-Builder] NASA audio on IRLP?

On Echolink,the Conference "Orlando" will provide audio qhen their is a mission going on! 73/s Gervais,VE2CKN Irlp 2105 ,2907 Echolink VE2RXY-R and VE2RWO-R

RE: [Repeater-Builder] Comprod dual band commercial antennas (Was - Re: New db314?)

http://www.comprodcom.com/en/ 73/s

[Repeater-Builder] Master 2 and DCS

HI all well i womder if someone outhere ever install an DCS tone board into a master 2??? replacing the standard encore-decode board i want to switch my M2 to Digital coding thanks for the help Merry christmas gervais ve2ckn

[Repeater-Builder] i am trying to find a contact i add here in the group from Alabama,year ago!!

group and contact me again please thanks very much at the moderator for his tolerance on my email i appreciate tolerance! 73/s Gervais ve2ckn

RE: [Repeater-Builder] Re: Repeater Antenna Choice

salted winds,we prefer metal antenna since then to bad i have one in my garage,srl210,which i dont used for many years 73/s all gervais http://www.emoticonesgratuites.ca/?icid=EMFRCA120

  1   2   >