After interfacing my C74CXB to an external controller, everything seems
to be playing real nice. In scrutinizing received signals, it seems as
if the the MSF squelch is a little tight and not letting week signals
become week but rather just squelching them out.
The receiver is programmed for C
Receiver Squelch is just that ... a level at which the local receiver
un-squelches. The repeater squelch is the level the station uses to
determine (for its own internal controller) when it is actually going to
pass a signal through for repeat. I would recommend that you just set
both at the
Great, thanks James!
Adam N2ACF
James Delancy wrote:
> Receiver Squelch is just that ... a level at which the local receiver
> un-squelches. The repeater squelch is the level the station uses to
> determine (for its own internal controller) when it is actually going to
> pass a signal through
Adam...
My experience with a C85GFB is that my squelch also seems a bit "tight", but
so far I have not been able to do anything about it. I set it to threshold
when I had the service monitor on it, and the station was within
specifications.
FWIW - I currently have the station set for "AND" squ
Hi Mark,
Good to know and thanks! I haven't been back to the repeater yet but
when I get there, I'll make some small adjustments.
Thanks again!
Adam N2ACF
N9WYS wrote:
> Adam...
>
> My experience with a C85GFB is that my squelch also seems a bit "tight", but
> so far I have not been able to d
Doesn't that (squelch tail without reverse burst) already occur? If so,
I'm not particularly worried about it.
Mark - N9WYS
_
From: Repeater-Builder@yahoogroups.com On Behalf Of James Delancy
PL only squelch will work solely on the PL detect function of the station.
This means t
6 matches
Mail list logo
