should be
affordable for a professional finish ?
I had a whole Heathkit amp done years ago and it looked quite replenent in
bright blue .
To: Repeater-Builder@yahoogroups.com
From: wb2...@roadrunner.com
Date: Sat, 28 Feb 2009 19:46:06 -0500
Subject: Re: [Repeater-Builder] Painting Question
Sent: Saturday, February 28, 2009 6:35 PM
Subject: RE: [Repeater-Builder] Painting Question
Google anodizing , can be done cheaply in the home
Google anodizing , can be done cheaply in the home
To: Repeater-Builder@yahoogroups.com
From: chris.carr...@yahoo.com
Date: Sat, 28 Feb 2009 09:09:39 -0800
Subject: Re: [Repeater-Builder] Painting Question
I know from experience lacquer chips, I would try
Google anodizing , can be done cheaply in the hime
To: Repeater-Builder@yahoogroups.com
From: chris.carr...@yahoo.com
Date: Sat, 28 Feb 2009 09:09:39 -0800
Subject: Re: [Repeater-Builder] Painting Question
I know from experience lacquer chips, I would try
I know from experience lacquer chips, I would try epoxy based paint.
Best Regards,
Chris Carruba
From: Scott
To: Repeater-Builder@yahoogroups.com
Cc: Scott Overstreet
Sent: Saturday, February 28, 2009 11:45:28 AM
Subject: [Repeater-Builder] Painting
Hello All--
I have need to paint an ingraved aluminium pushbutton The engraving is of
the depth and width as used on my early 390.
What kind of paint should I use for the button?--the color needed can be
satisfied with "appliance" almond.
What do I use for the ingraving fill paint?
cans would probably look pretty good in that shadejust a
thought.?? Ed
-Original Message-
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Mon, 13 Oct 2008 10:19 am
Subject: Re: [Repeater-Builder] Painting
David,
?
Go to Ace Hardware and get your standar
Yes but the standard? Acrylic, obviously not laytex, and not enamel right?
--- On Mon, 10/13/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Subject: Re: [Repeater-Builder] Painting
To: Repeater-Builder@yahoogroups.com
Date: Monday, Octo
David,
Go to Ace Hardware and get your standard grey Semi Gloss paint and paint them.
Make sure to cover the screw holes to seal from over spray.
Mike
-- Original message --
From: "David" <[EMAIL PROTECTED]>
So I have been trying to put together and rebuild a bunch of
So I have been trying to put together and rebuild a bunch of equipment
for the hilltops. Just got another set of Moto T1504 UHF cans. I have
been attempting to do a neat and tidey job (for a change) and make sure
everything is clean, and wired neat and such.
So now, the inside of the duplexers
One of those topics that needs to be on the Repeater-Builders web site,
since it comes up about every couple of weeks.
Chuck
WB2EDV
Mike Perryman wrote:
> That was covered yesterday
>
> SHERWIN-WILLIAMS PRODUCTS:
>
> > >>
>
> > >> Etch P60G2 "Wash Primer"
>
> > >> Primer D61H75 "Polane 2.
nal Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of chris
InosSent: Thursday, March 23, 2006 3:49 PMTo:
repeater-builder@yahoogroups.comSubject: [Repeater-Builder]
painting antenna
would like to paint a cellwave stationmaster...any recommendati
would like to paint a cellwave stationmaster...any recommendation as to what would be a fitting paint and where to procure it? thanks chris
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2ยข/min or less.
YAHOO! GROUPS LINKS
13 matches
Mail list logo