Mike,
Did you just build up these repeaters? If so, you need to remember to install a
load on the audio output of the receiver audio amplifier. This can be placed at
the speaker connections. If there is not an 8 Ohm load on the audio output, it
will produce a low level oscillation in the audio
Thanks to all that replied with suggestions for my linking problem. With
all the answers you gave I was able to resolve the problem. The first
mistake was in one radio I forgot to put a load across the speaker
connections as I wasn't using one. ( the other radio I did. must have been
one of thos
epeater-Builder@yahoogroups.com
Sent: Tuesday, October 21, 2008 8:21 PM
Subject: RE: [Repeater-Builder] Re: Ge mastr 2 link question
Thanks to all that replied with suggestions for my linking problem. With
all the answers you gave I was able to resolve the problem. The first mistake
was in one ra
e failure every two years.
Key it down - burn it in.
Bill - W6CBS
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike DeWaele
Sent: Tuesday, October 21, 2008 7:22 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re:
4 matches
Mail list logo