Re: [Repeater-Builder] Sinclair Q2330E Tuning Problems

Per, Since the harness is not normally stocked by a distributor, and would therefore be a special-order item, it makes sense to order directly from Sinclair. More information can be found at the Sinclair Web site: When you order the harness, be very e

Re: [Repeater-Builder] Sinclair Q2330E Tuning Problems

Eric, thank You for very accurate information, this is what I suspected. My harness is 323mm (~12.72 inches) between adjacent connectors so this is clearly a high-split duplexer. Do You (or anyone else) know where I could obtain a proper harness (Sinclar Canada/USA direct or a distributor)? 73,

Re: [Repeater-Builder] Sinclair Q2330E Tuning Problems

If the distance between the centers of any two adjacent tee connectors is about 12.75 inches, you have the 148-174 MHz version. If the distance is close to 14 inches, you have the 132-150 MHz version. Both versions have the same physical dimensions and the same coupling loop assemblies; the harn

Re: [Repeater-Builder] Sinclair Q2330E tuning problems

Per Molund wrote: > > I am trying to retune an Sinclair Q2330E duplex filter to 145 MHz > (145.1375/145.7375) from it's factory configuration of 150 MHz > (150.83/149.80), however the notch atenuation is strongly reduced. > There is also impossible to set ut the proper bandpass/notch > sepa

Re: [Repeater-Builder] Sinclair Q2330E tuning problems

John, thank You for the info! ---per At 23:55 06.01.2005, you wrote: >Sorry for the "repeat'... but Bob Morton VE3BFM is at [EMAIL PROTECTED] >I originally sent the wrong address. > >John VE3AMZ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yaho

Re: [Repeater-Builder] Sinclair Q2330E tuning problems

Sorry for the "repeat'... but Bob Morton VE3BFM is at [EMAIL PROTECTED] I originally sent the wrong address. John VE3AMZ - Original Message - From: "Per Molund" <[EMAIL PROTECTED]> To: Sent: Thursday, January 06, 2005 4:18 PM Subject: [Repeater-Build

Re: [Repeater-Builder] Sinclair Q2330E tuning problems

Repeater-Builder] Sinclair Q2330E tuning problems > > > I am trying to retune an Sinclair Q2330E duplex filter to 145 MHz > (145.1375/145.7375) from it's factory configuration of 150 MHz > (150.83/149.80), however the notch atenuation is strongly reduced. > There is also i

[Repeater-Builder] Sinclair Q2330E tuning problems

I am trying to retune an Sinclair Q2330E duplex filter to 145 MHz (145.1375/145.7375) from it's factory configuration of 150 MHz (150.83/149.80), however the notch atenuation is strongly reduced. There is also impossible to set ut the proper bandpass/notch separation. I noticed fron the Q233