Have some Spectra TAC equipment for sale:
6 VHF Range 2 (2 meters) Spectra TAC Micor receivers, PL cards, line
driver cards and some meter modules. $50 each.
1 Comparator with 8 SQM cards (C version)$100
If you want all the equipment, we can talk about the price...
Local pickup in
Does anyone have a good circuit to use a non-spectra tac receiver with a voter?
That is, besides the one on the Repeater-Builder web site. Alternatively, does
anyone have any status tone encoder cards for the Spectra Tac?
Thanks
Will
Has anyone encountered this problem with the Spectra Tac receivers? I
have a number of receivers that are having an issue of the squelch
being opened up by something in the circuitry ramping up a voltage.
Or at least that is what I believe. The problem is that the receiver
only has the PL
problems as well.
5) Be sure that your guard tome level is set to -13dbm, any lower and the
receiver will false
Hope this helps.
lance N2HBA
- Original Message -
From: kc8lts
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 07, 2007 1:21 PM
Subject: [Repeater-Builder] Spectra
I had a bad cap on the power supply do that at one time.
- Original Message -
From: kc8lts
To: Repeater-Builder@yahoogroups.com
Sent: Monday, May 07, 2007 2:21 PM
Subject: [Repeater-Builder] Spectra Tac (Micor) receiver problem?
Has anyone encountered this problem
Has anyone had much luck with a specra tac voter? I found one at a
good price, but I was wanting to know if it would be worth messing
with for my amateur repeater. I was told that they require a 100%
transmit on the links, but someone else also told me that they could
be used normally as well.
Jordan,
You are correct when you say that, in *standard* configuration, they do
require a 100% status tone on the line. HOWEVER, there was a discussion a
while back about using the SpectraTAC system and modifying it so you didn't
need the status tone to vote... but I can't find where that was
Jordan, Mark, et al,
I have a some of information on the subject of using the Motorola
Spectra-TAC voter in a non-Motorola environment. Unfortunately, this
information exists in many emails and is not a complete representation
of all of the concepts that were discussed in a past thread. That
Hi, Kevin
I'm pretty sure that's how I followed the conversation, too. However,
Jordan was the one who was actually looking for the information on how to do
it.
My system is up and running happily with the status tone - and since the
county radio system is allowing me to piggyback my audio on
Hi Guys,
We run Motorola SpectraTac on all of our systems. I also use some with
normal staus tone operation and some set up for fixed gain with cor from the
link
receivers. These run fine mixed mode in the same comparator. I have the
details on the mods that I came up with for the SQM's if
[EMAIL PROTECTED] wrote:
Hi Guys,
We run Motorola SpectraTac on all of our systems. I also use some with
normal staus tone operation and some set up for fixed gain with cor
from the link receivers. These run fine mixed mode in the same
comparator. I have the details on the mods that I came
Yes please assemble the Spectra Tac info.
I actually have a comparator and receiver shelf on my bench working on a way
to use the two (and more recievers) without the status tone.
I have heard of people inserting the status tone at the link receiver end,
and several other ideas.
So, I
Steve Kometz wrote:
Yes please assemble the Spectra Tac info.
I actually have a comparator and receiver shelf on my bench working
on a way to use the two (and more recievers) without the status tone.
I have heard of people inserting the status tone at the link receiver
end, and several
Hi Kevin,
I found my prints. I have modified schematics and board layouts of the SQM.
I will scan them in the morning at work and try to send them to you.
Glenn W8AK
Mike I believe that I have that manual in my barn. Let me look later today (Wednesday). If so, and you still want it, I'll send you a copy. Are you good on QSL.com??Ron - AA6Dmike [EMAIL PROTECTED] wrote: I am looking for a print out of the TRN6091C Spectra-Tac Signal Quality module.
Mike After lunch today, I looked in my piles of Moto books in the barn. Your number TRN6091C does not match anything I show. In the Spectra-Tac Receiver Manual, I do show a "Receive Quality Signal (RQS) Detecter-TLN5944A" and a "Receive Quality Signal (RQS) Line Current Generator -
, May 31, 2006 6:01 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Spectra-tac
Mike
After lunch today, I looked in my piles of Moto books in the barn. Your
number TRN6091C does not match anything I show. In the Spectra-Tac Receiver
Manual, I do show a Receive Quality
Eric is correct. I have that manual,
and the part numbers are correct.
Mark N9WYS
From:
Repeater-Builder@yahoogroups.com On Behalf Of
Eric Lemmon
Sent: Wednesday, May 31, 2006 7:54
PM
To:
Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder]
Spectra-tac
Ron
I am looking for a print out of the TRN6091C Spectra-Tac Signal
Quality module. If any one has a copy I will gladly pay for a copy or
the cost to copy it along with the postage. This is the later verison
of the SQM and I have check a couple sites with no luck. If someone
has the the number to
a copy.
Charles Miller
- Original Message -
From: mike [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 30, 2006 10:39 PM
Subject: [Repeater-Builder] Spectra-tac
I am looking for a print out of the TRN6091C Spectra-Tac Signal
Quality module. If any one has a copy
-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of mike
Sent: Tuesday, May 30, 2006 8:40 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Spectra-tac
I am looking for a print out of the TRN6091C Spectra-Tac Signal
Quality module. If any one has a copy I will gladly
Does anyone have a couple extra SQMs for Spectra Tac for sale?
Thanks
Will
YAHOO! GROUPS LINKS
Visit your group "Repeater-Builder" on the web.
To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to the
What is the easiest way for me to get the audio louder on my Motorola
Spectra Tac
Receiver, I want to use a external Mot speaker not the little one on
the module
Thanks Don KA9QJG
Yahoo! Groups Links
* To visit your group on the web, go to:
Sent: Thursday, June 30, 2005 2:07 AM
Subject: [Repeater-Builder] Spectra Tac Audio
What is the easiest way for me to get the audio louder on my Motorola
Spectra Tac
Receiver, I want to use a external Mot speaker not the little one on
the module
Thanks Don KA9QJG
Yahoo! Groups Links
Hi All,
There is always Motorola's amplified speakers, like the NSN-6048, which has a10 watt audio amp built into the speaker. These are used in the convert-a-coms.
Give it the speaker output and 12 volts and stand back! Their Loud!
73, Brian, WD9HSY
YAHOO!
Do you have the pin-out for the connector to the amplified speaker?
I have one that I would like to use in a large 4-wheel drive... a
lot of noise to overcome ;-)
mike
At 10:30 AM 06/30/2005 -0400, you wrote:
Hi All,
There is always Motorola's amplified speakers, like the NSN-6048, which
has
On Thu, 30 Jun 2005 [EMAIL PROTECTED] wrote:
Give it the speaker output and 12 volts and stand back! Their Loud!
He's not joking folks! No volume control save for what you feed it. I was
testing a phone patch with one and the DTMF tones almost ran me out of the
room.
--
Kris Kirby [EMAIL
Howdy
Is this the small connectors or the large connectors for the micor chassie ?
..bob
Kevin Berlen, K9HX wrote:
I am looking for a TKN6759A cable for a Spectra-Tac receiver. This
cable allows a receiver service module to take meter readings from
the receiver RF-IF board installed in
Bob,
The TKN6759A cable has identical seven-pin male plugs on both ends. It is used
in SpectraTAC satellite and remote receivers to connect the metering test jack
on a MICOR Sensitron receiver board to the backplane of the SpectraTAC unit, so
that the receiver functions can be monitored on the
I am looking for a TKN6759A cable for a Spectra-Tac receiver. This
cable allows a receiver service module to take meter readings from
the receiver RF-IF board installed in the chassis. I anyone has a
spare or knows of a source please contact me direct. TIA and 73,
Kevin, K9HX
Yahoo! Groups
Hello,
Have about 12 Spectra TAC "SQM" modules (TRN6091B version).
One Command Module (TRN6093A)
For Sale.
Contact me of list if interested
Gerry N9MEP
Yahoo! Groups Links
To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/
To unsubscribe
31 matches
Mail list logo
