I picked one of these up to replace my old TLN1127 DC Remote Adapter. I
contacted Motorola Parts ID and the manual for it is no tonger available. Can
anyone help me out?
Thanks,
Ron W6FM
Hi everyone, does anyone have information on this duplexer such as insertion
loss, rejection, power handling tune up procedures? Thanks.
At 04:01 PM 05/10/08, Gary <[EMAIL PROTECTED]> wrote:
>Mike,
>just about any of Kenwood's hand mics with DTMF and the circular 8-pin
>connector will work fine on those radios including but not limited to
>the MC-43's and MC-53's. The original mics for both were the teardrop
>shaped MC-43's which, b
Mike,
The TM241 uses a MC-44 mike. The MC44DM has the DTMF pad. My 241a mike
had no model on it.
Try http://www.universal-radio.com/catalog/fm_txvrs/TM241A.html for info
on the 241. It has long been discountinued. I use mine for packet.
73, ron, n9ee/r
Ron Wright, N9EE
727-376-6575
Go to the microphone connection page
http://homepage.ntlworld.com/rg4wpw/date.html
Ron
Gary wrote:
>
>
> Mike,
> just about any of Kenwood's hand mics with DTMF and the circular 8-pin
> connector will work fine on those radios including but not limited to
> the MC-43's and MC-53's. The o
Mike,
just about any of Kenwood's hand mics with DTMF and the circular 8-pin
connector will work fine on those radios including but not limited to
the MC-43's and MC-53's. The original mics for both were the teardrop
shaped MC-43's which, by the way, sound a bit better on TX than the
backlit MC-53'
Does anybody know what microphones fit a Kenwood 231
and 241 ?
I'm helping a couple of folks locate parts to resurrect a
semi-abandoned city EOC. There are two 231 radios
and one 241 radio involved.
Does anybody have schematics? All we need to make work
is PTT and mic, we don't need DTMF or any
Does anybody have any service information on the following amp, we had
to take it out of our 444.4 repeater in the CN Tower due to steadily
dropping power and don't seem to have a service manual:
Mobile Data International - FCC ID DO29YR-UM032Z (No Model #) - 25
Watt RF P.A. The PC board is mark
I have been given a Motorola RF deck and am trying to get some info
for it, at least a schematic. The assembly is a TLD6392A-2 running a
single 8560. The power supply (a real beast) has two different
numbers stenciled on the back of the panel, TLN5049A and TPN1104A. I
believe this is probabl
Micor series TLE1713A-3. Looking for schematics, metering info, etc.
and/or a manual if you have one to spare or can copy part of a manual.
For non-commercial use in an amatuer repeater. The amplifier seems to
be working fine. 2 Watts in ~90+ max Watts out (un-controlled) at 449
MHz. I will be
http://www.qsl.net/va3rr/lunar80p/lunar80P.html
See if this helps, Mark. PS - tnx fer the help on the MLS1 - Now if I could get my VHF Orion into 2M band.Steve
On 3/3/06, Mark Cobbeldick <[EMAIL PROTECTED]> wrote:
Lunar Electronics model # PAC 800 preampDoes anyone have any info on the a
Lunar Electronics model # PAC 800 preamp
Does anyone have any info on the above preamp or know where I can
download data?
Thank you in advance,
Mark C. KB4CVN
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> T
This looks like a VHF Engineering repeater, with the addition of a
metering system with associated switch.
I have some VHF Engineering info that I have found from the web, and
am looking for info on ECL.
The front is labeled ECL Model 411.
It is a 2m repeater with the PA Mounted on the u
Thanks Eric, tells me what I need to know. Appreciate it.
Mathew
Eric Lemmon <[EMAIL PROTECTED]> wrote:
Mathew,The TLD1703 power amplifier is designed for the 150.8-162 MHz band, andis rated for 60 watts continuous duty.73, Eric Lemmon WB6FLYn9lv wrote:> Can anyone supply me with the details
Mathew,
The TLD1703 power amplifier is designed for the 150.8-162 MHz band, and
is rated for 60 watts continuous duty.
73, Eric Lemmon WB6FLY
n9lv wrote:
> Can anyone supply me with the details of this amp for the VHF
> spectrum, like which part of the band, and power output?
Yahoo! Gro
Can anyone supply me with the details of this amp for the VHF
spectrum, like which part of the band, and power output.
Thanks
Mathew
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group,
I’d like some information on this Power Amp:
Standard UHF RF Power Amplifier
Model RPA-5/90WA
25A input at 12VDC
The heat sink is finned aluminum, measures ~19.5 x ~10.5 inches, and is
notched for rack mounting.
Is this amp rated for continuous duty at full output, or is it
looking for poop on
trielectric amp
a4090mbr
freq range ( appears uhf)
mdm ted
Ted Bleiman K9MDM
MDM Radio Ltd - 1629-B N. 31 st Ave Melrose Park, IL 60160 708.681.0300 fax 708.681.9800 web http://www.mdmradio.com -
Check it now!!
Do you Yahoo!?
Yahoo! Small Business - Try our
Ken,
The Service Manual for the I50R controller is 6880902Z74, available from
Motorola Parts for about $15.
73, Eric Lemmon WB6FLY
Ken wrote:
>
> Hi, I just picked up a Motorola I50R controller. However, I do not have a
> copy of the manual. Does anyone know how I can reprogram this unit? Tha
Hi, I just picked up a Motorola I50R controller. However, I do not
have a copy of the manual. Does anyone know how I can reprogram this unit?
Thanx for reading.
Ken
[EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeat
Does anybody have any info (especially schematics) on the
following Micor station cards:
Auto Station ID - QRN8424B
Station Test Set - either TLN1873A or TLN5957A
Thanks in advance
Mike WA6ILQ
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repea
and Communications Consultant
> -Original Message-
> From: Vincent McKever [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, January 06, 2004 10:04 AM
> To: Repeater-Builder@yahoogroups.com
> Subject: Re: [Repeater-Builder] Info needed - 220 duplexers
>
>
> Call Dana Brown at TXRX for t
Call Dana Brown at TXRX for the info. His number is 1-800-866-8979. A real
nice fella and I sure will be happy to help you out.
Vincent N6OA/2
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Monday, January 05, 2004 10:50 PM
Subject: [Repeater-Builder] Info needed
Would anybody out there have a set of Wacom's WP-625 duplexers?
I am especially looking for the model with the tuning stubs.
No - not to buy! I need some info - the length of the tuning stub(s)!
It seems a previous owner of my duplexers trimmed the stub! OUCH!
To make matters worse, when TXRX
24 matches
Mail list logo