v3.6.5.
After voice tracking a few items (haven't bothered to do this before),
I'm getting a lot of random future dates and times beside every title in
the log in the voice track editor. What would cause this to occur?
Sample screenshot here:
If you play a sound panel item within RDAirPlay, or at least here
anyway, and then stop it without letting it finish... then go and click
on Add or Del like you're off to edit the log later etc... the sound
panel items that were stopped, change their label to the runtime left to
go, along with
RD 3.6.5:
I'm not sure if anyone has noticed, after generating the spin count
report for a day, it doesn't always report the spins. Other times when
it does show them when you click view report, it doesn't always save the
spin count part of the report to file, it stops after saving the record
m assuming it would be an overall history for scheduled items from all
groups, but I don't want to hazard a guess on this one, as the
separation values will have very different results.
Cheers,
Gavin.
On 10/03/2022 3:21 pm, Gavin Stephens wrote:
On 10/03/2022 3:12 pm, Gavin Steph
ens wr
I had a look at some of the code, but I couldn't make sense of where I
was suppose to be looking to try and find my answer.
On 10/03/2022 3:21 pm, Gavin Stephens wrote:
On 10/03/2022 3:12 pm, Gavin Stephens wrote:
Just double checking that I have this right:
Event Artist/Title separation
As per subject:
RDAirPlay 3.6.2 hangs for 2-3 seconds on log item start in when Flash
Active Button's activated and the log is empty. I have RDAirPlay set to
normally open last log. However, after starting it without a log opened
the previous time (starting blank) the problem occurs. It
On 10/03/2022 3:12 pm, Gavin Stephens wrote:
Just double checking that I have this right:
Event Artist/Title separation is a value in minutes not cart count yes?
And scheduler rules in a clock, are based on cart count yes?
Minimum wait that is...
Thanks,
Gavin.
--
This email has
Just double checking that I have this right:
Event Artist/Title separation is a value in minutes not cart count yes?
And scheduler rules in a clock, are based on cart count yes?
Thanks,
Gavin.
--
This email has been checked for viruses by Avast antivirus software.
On 22/02/2022 5:35 am, Bill Putney wrote:
This seemed to be true of at least the older AES3 interfaces on
Wheatstone boards. If the "consumer bit" was set in the header, the
board wouldn't accept data. Our Logitek boards ignored that bit. For
the first few years of operation we used some $25
RE: subject,
If I can only select the input digital type on my Audioscience AS5111 in
rdadmin, do I take it that my card's digital output type selection is
not currently supported by the HPI driver or RD 3.6.2?
The only output changes I can make are to the analogue ref. level from
what I
The easier question I should have asked;
If RD is playing a test tone at 0dBFS, and the Ref. Level is 0 in Audio
Ports, is the ASI card playing that tone at the maximum rated output
level? Or is it still 6dB down from maximum?
Thanks,
Gavin.
On 13/02/2022 3:16 pm, Gavin Stephens wrote
assuming it has to be
set at the maximum of 6, or does it really need 8?
Cheers,
Gavin.
On 13/02/2022 2:31 am, Fred Gleason wrote:
On Feb 12, 2022, at 00:49, Gavin Stephens wrote:
Under audio ports in rdadmin, what exactly is the ref level setting,
or more specifically what does this do
should be seeing 1.22V by default of 0? Or
does the ref. level have some other internal tricks within RD or the HPI
it's doing not just simply raising the output level gain?
Cheers,
Gavin.
On 12/02/2022 6:49 pm, Gavin Stephens wrote:
Afternoon.
Just a couple of question regarding an ASI
Afternoon.
Just a couple of question regarding an ASI configuration.
Under audio ports in rdadmin, what exactly is the ref level setting, or
more specifically what does this do?
The output on my ASI5111 Rev.F card seems to be a bit low on the RD box.
So I decided to plug a multi-meter in to
As silly as it sounds, that's exactly how I get external files to my RD
box from Windows, albeit USB HDD. It used to be via secure FTP only and
limited to the IP of a particular Windows box. But I don't need remote
access so I can get away with this.
The only Ethernet connection RD has is a
What are the main changes to the level meters?
Sorry I don't have a spare box here to put 4 on yet but working on it.
Cheers,
Gavin.
On 1/08/2021 8:57 am, Fred Gleason wrote:
On behalf of the entire Rivendell development team, I'm pleased to
announce the availability of the third public beta
http://wiki.rivendellaudio.org/index.php/Stations_using_Rivendell ??
On 3/01/2021 2:37 am, Rob Landry wrote:
Where are y'all adding these stations? Is there more than one
Rivendell Wiki? The one I found by searching for "Rivendell Wiki"
doesn't seem to list any stations at all.
Rob
the admin is no longer
active to approve new members. Kind of worthless, like most everything
else on Facebook.
Michael
Gavin Stephens wrote on 12/24/20 6:38 AM:
It's still active, I'm a member in the group.
This is the one I'm a member of:
https://www.facebook.com/groups/1739406449620107
Cheers
It's still active, I'm a member in the group.
This is the one I'm a member of:
https://www.facebook.com/groups/1739406449620107
Cheers,
Gavin.
On 24/12/2020 7:20 pm, wa7skg wrote:
Rivendell Open Source Automation Users
--
This email has been checked for viruses by Avast antivirus
from without an intro
before it.
Cheers,
Gavin.
but I'm curious to know
what you (or Rivendell) did do make this happen.
Thanks!
~David Klann
On 9/09/2020 1:26 am, Gavin Stephens wrote:
I had a strange sequence of events this morning. On the way home from
work after 1am I heard
Never mind :)
On 9/09/2020 1:26 am, Gavin Stephens wrote:
I had a strange sequence of events this morning. On the way home from
work after 1am I heard a song that was sopose to play, not play even
though the log said it should have. Instead the one after it did, then
about 50 seconds
I had a strange sequence of events this morning. On the way home from
work after 1am I heard a song that was sopose to play, not play even
though the log said it should have. Instead the one after it did, then
about 50 seconds in to the next song, the one that was sopose to play
finally
On 19/08/2020 4:35 am, Bj Mora wrote:
Hi Mark,
The answer to your last question is “Yes,” it would be a problem if
the Friday night log ended early, so the Saturday LEGAL ID (your
next timed event) would run before scheduled, and then the LOG chain
would soon start your Sunday log
I'm guessing is specific to the macro cart? I've tried a timed hard
start in 3.4.1 of a normal cart in Aux 1, and it starts spot on the second.
Gavin.
On 26/07/2020 4:29 am, David Klann wrote:
After upgrading one of my client systems to Rivendell 3.4.1, I'm seeing
some odd behavior with Timed
/CentOS/ but something
tells me it's not that simple as downloading all that and replicating
the same server address locally on FTP or something?
Thanks,
Gavin.
On 23/07/2020 2:10 am, Gavin Stephens wrote:
Thanks for the reply David.
The only password I set during setup was the root and Maria
Thanks for the reply David.
The only password I set during setup was the root and Maria database I
think. I don't remember setting a password for any other account.
Cheers,
Gavin.
On 23/07/2020 2:00 am, David Klann wrote:
Tsk, tsk... Replying to one's own thread...
On 7/22/20 8:45 AM, I
Look forward to using this :) 3.4.0 hasn't missed a beat here.
When doing an update if installed over network as per:
http://static.paravelsystems.com/rivendell-install-rd3/rivendell-install-rhel7.html
Does one just start from the "Running the installation Script" section
again? Is there an
maximum peak output level in RD of +24dBu.
What I'm also wanting to know, if you change the ASI card in RDAdmin to
6dB level output, does this take the card to +24dBu out or does is just
add 6dB of digital gain before it goes to the sound card?
Cheers,
Gavin.
On 16/06/2020 2:04 am, Gavin
On 18/06/2020 12:50 pm, Chuck wrote:
On Tu, 16 Jun 2020 07:48:44 -0500
David Klann mailto:dkl...@linux.com>> wrote:
It's even more flexible with the (relatively) recent feature of being able to
specify Cut play "rotation" by either "weight" or "specified order"
(prior to v3 "weight" was the
On 20/06/2020 10:10 pm, Gavin Stephens wrote:
On 18/06/2020 12:50 pm, Chuck wrote:
On Tu, 16 Jun 2020 07:48:44 -0500
David Klann mailto:dkl...@linux.com>> wrote:
It's even more flexible with the (relatively) recent feature of being able to
specify Cut play "rotation" b
On 18/06/2020 12:50 pm, Chuck wrote:
On Tu, 16 Jun 2020 07:48:44 -0500
David Klann mailto:dkl...@linux.com>> wrote:
It's even more flexible with the (relatively) recent feature of being able to
specify Cut play "rotation" by either "weight" or "specified order"
(prior to v3 "weight" was the
I was just wondering if it's safe to schedule the same cart (with
multiple cuts) back to back in a log without running the risk of
repeating the same cut twice in a row?
Cheers,
Gavin.
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Rivendell doesn't show or can assign the playstreams
On 16/06/2020 1:47 am, Fred Gleason wrote:
Yes, there’s definitely a bit of confusion going on here; the primary
challenge being that Rivendell, ALSA and ASI all use slightly
different terminology to refer to the same things.
With reference
this?
Cheers,
Gavin.
On 14/06/2020 7:43 am, Gavin Stephens wrote:
I'm also guessing this is about ALSA not HPI.
On 14/06/2020 7:39 am, Gavin Stephens wrote:
Awesome, thanks Fred.
I asked ASI about the rev.F 5111 as well and their reply is below.
However RD still reports the card as 1 output via
I'm also guessing this is about ALSA not HPI.
On 14/06/2020 7:39 am, Gavin Stephens wrote:
Awesome, thanks Fred.
I asked ASI about the rev.F 5111 as well and their reply is below.
However RD still reports the card as 1 output via the HPI driver which
I'm using at the moment (managed to get
Inc.
Phone +44 203 287 3541
USA Sales Toll Free 1-855-AUDIOSC
http://www.audioscience.com>> -
<http://www.facebook.com/AudioScienceInc>
On 14/06/2020 3:17 am, Fred Gleason wrote:
On Jun 12, 2020, at 15:25, Gavin Stephens <mailto:ga...@stephens.net.nz>> wrote:
Slightly differe
card 0
}
In the Rivendell menu under configuration run rdalsaconfig which
should find your ASI card.
cat /etc/asound.conf will tell you which one is rd0, 1 2 3 etc
098176358
regards
Robert Jeffares
On 12/06/20 6:11 am, Gavin Stephens wrote:
Hi guys,
Just a couple of quick questions. It's been almost a
I think installing RD3 I've run in to an issue I struck (with me)
setting up RD 1.8.5 I think it was when I used it last.
When I go to backup the database (this time RDDBConfig in RD3) the file
it backups up seems to contain what looks like an export/backup template
of code everywhere but not
that mean I need to take
it out if I want to have multiplecarts play/segue at once?
Cheers,
Gavin.
On 13/06/2020 1:38 am, Fred Gleason wrote:
On Jun 11, 2020, at 14:11, Gavin Stephens <mailto:ga...@stephens.net.nz>> wrote:
Just a couple of quick questions. It's been almost a decade sinc
I card.
cat /etc/asound.conf will tell you which one is rd0, 1 2 3 etc
098176358
regards
Robert Jeffares
On 12/06/20 6:11 am, Gavin Stephens wrote:
Hi guys,
Just a couple of quick questions. It's been almost a decade since I
used RD and I'm retiring my old machine here and installing RD3
Hi guys,
Just a couple of quick questions. It's been almost a decade since I used
RD and I'm retiring my old machine here and installing RD3. I've done it
via the instructions on the Paravel website with CentOS7.
I've ran in to a few small hick ups with audio. I've got an ASI5111
Rev.F card
wrote:
>can see an immediate reason why it won't work...did you make sure the
>hard drive was empty?
>
>On Friday, March 29, 2019, 9:08:26 AM EDT, Gavin Stephens
> wrote:
>Well I had some older Lenovo Core2Duo machines (7360 CTO ThinkCenter's)
>arrive today to mark them for RD
Well I had some older Lenovo Core2Duo machines (7360 CTO ThinkCenter's) arrive
today to mark them for RD installation with new HDD's.
Unfortunately Cent OS minimal ISO and full 64-bit wont install.
I keep getting something to do with failed to claim resource 0, then eventually
goes to a
Sorry last question, I have some other machines on the way so I'll be able to
answer the rest once I have an RD machine up and running to play with again.
Btw Fred enjoyed the Youtube interview talking about open source I came across
this week. That's what reminded me of RD again.
If I
easier?
Cheers,
Gavin Stephens.
--
Sent from Open Mail on Android.___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
Firstly appologies for asking this in here, but there's such a diverse amount
of broadcasters in here with Audioscience cards as well.
Does anyone know how long the ASI5111 revision F cards have been around?
They've increased the analogue output to full +24dBu.
I noticed they have a new card
I would imagine such an effect would also load the CPU, and screw up sample
rates. All that nice dithering and re-quantizing. eeew.
Gav.
Rivnedell normalises audio to something like peak -13dBFS if you have it set
to normalise on import etc... The meters in Rivendell are also more like a
real(ish) VU meter, not a peak meter like in Cool Edit/Audition etc... don't
get the two confused. It normalises to this low peak level by
I don't know if it's still best practise these days, however I never mix
sample rates or channels.
Since I used to use acient Antex cards in Windows I learnt early on a lot of
cards couldn't segue their seperate wave devices if they weren't sample rate
matched and had the same channels.
I
If you have a connection that slow, I'd strongly suggest compressing it down
as another copy for transferring.
I used to take IRN/Newstalk ZB Affiliates bulletins and had to get them
ready to transfer back out to another system.
I had a spare old Windows computer though with a bunch of batch
I tried this with 2.9.0 today, it didn't crash straight away after the sound
panel stopped playing however when I went to start the main log it crashed
then instead. But after swapping RDLogin users while the sound panel was
still playing.Hi Fred.
Not sure if you remembered to look in to
Hi Fred,
Not sure if you remembered to look in to this. When I start a song on the
sound panel in RDAirPlay 2.8.1(now 2) and change user login to another RD
account, the playing sound panel item shows on the panel that it isn't
playing when it still is. Once the item finishes playing,
Is this possible in Gnome like it was in KDE?
I used to save the cart select dialogs so it would show the group and more
items when you click on add in RDAirPlay between restarts of RDAirPlay. Not
sure if this is possible in Gnome?
Cheers,
Gavin.
---
This email is free from viruses and
I thought at soem stage in RD 2 the apostrophe was allowed as a song
title/search option?
I can paste them in to RDLibrary and it works fine but I can't seem to type
them.
Cheers,
Gavin.
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
Since the list changed something a year or two back now when you do a reply,
it replies to the sender not the list.
Well it does in my case.
I have to retype the to address to the lists.
But I think in your case, as you use Gmail, Gmail automatically strips out
any email sent from you from
If you know the IP and share, you can just type it manually in Windows.
IE: Open up explorer (right click start -- explore, in the address field
type \\ipaddress\share and that'll connect you to the share. You can map the
drive the same way without having to bother using network neighbourhood.
Yeah what he said :o)
I'm not a great either of how Windows shares the main drive by default too.
You can see that via the maangement console. I get nervous around Windows
networking, I still disable the server service and use FTP or SSH to access
Rivendell.
- Original Message -
Does RDLibrary reports not give you everything you need? Last time I used it
yonks ago it did a cart report in RDLibrary. I can't remember if you had to
select all items or not before hand.
It would be handy if it did a cut report too.
- Original Message -
From: Kevin, Natalia,
: Gavin Stephens ga...@stephens.net.nz
To: Rivendell Users Group rivendell-dev@lists.rivendellaudio.org
Sent: Friday, April 04, 2014 5:06 PM
Subject: Re: [RDD] Appliance not set correctly
Wow KDE 3.5 flies on these machines.
I re-downloaded the orginal CD appliance and tried again. Just a couple
in wine
but why bother.
Regards,
Wayne Merricks
The Voice Asia
On 04/04/14 13:49, Gavin Stephens wrote:
I think the crash in the DVD appliance was sound device related. As when I
changed the rdadmin/host details I noticed until you run rdalsaconfig and
setup the devices in rdadmin RDAirPlay just
Subject: Re: [RDD] Appliance not set correctly
On Apr 3, 2014, at 02:37 56, Gavin Stephens ga...@stephens.net.nz wrote:
I forgot to mention, when I changed user via rdlogin when the sound panel
was playing... when the item did finish and the meters stopped, RDAirPlay
simply disappeared
servers (and the
Windows version will optionally install a server for you, which is nice if you
want to experiment.)
On Fri, Apr 4, 2014 at 1:35 PM, Cowboy c...@cwf1.com wrote:
On Friday 04 April 2014 09:19:05 am Gavin Stephens wrote:
Any recommendations for an sql gui editor
Ah, but it was set correctly! The appliance comes configured quite
intentionally so that ‘any old user’ (i.e. non-root) cannot mess with files
in /var/snd. As an administrator you can of course override that policy if
you wish, but that’s certainly not Best Practice in my book. As for the
Message -
From: Fred Gleason fr...@paravelsystems.com
To: Rivendell Users Group rivendell-dev@lists.rivendellaudio.org
Sent: Friday, April 04, 2014 1:56 PM
Subject: Re: [RDD] Appliance not set correctly
On Apr 3, 2014, at 11:20 34, Gavin Stephens ga...@stephens.net.nz wrote:
So the RDlogin
and configured correctly. It wasn't in Cent 6.
- Original Message -
From: Gavin Stephens ga...@stephens.net.nz
To: Rivendell Users Group rivendell-dev@lists.rivendellaudio.org
Sent: Friday, April 04, 2014 3:21 PM
Subject: Re: [RDD] Appliance not set correctly
I'lm about to go try
My 64-bit machines arrived yesterday and I've been trying to install RD from
the latest DVD appliance.
Am I sopose to install Gnome or KDE? I tried KDE but I get no sound, no 3D
graphics or no GUI for add/removing and updating software. Keeping in mind I
come from Suse and Yast from the
2 Duo.
- Original Message -
From: Gavin Stephens ga...@stephens.net.nz
To: Rivendell Users Group rivendell-dev@lists.rivendellaudio.org
Sent: Thursday, April 03, 2014 6:35 PM
Subject: [RDD] Appliance not set correctly
After installing the latest appliance the following were really
Probably unrelated by a mile, but my older HP Compaq's did this in general.
Turned out to be faulty power supply each time something in the room was
turned on or off the USB mouse or keyboard would momentarily reset.
Sometimes it would have to be unplugged and back in for the PC to recognise
Does the latest appliance come with kermic style option for buttons?
Have ordered a few 64-bit machines can't wait to get v2 up and running.
Cheers,
Gavin.
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
It does, thanks for the info.
I'm looking at some 64-bit machines ex short term lease that have 160's in
them. I just need enough to get it installed with what I have which is only
about 50 hours of waves in my new database.
If my service shows back up in RDLogManager/Reports in RD2 then
I'm just reading over the install pdf for the appliance DVD.
It says a minimum of 320GB HDD, I realise this is ideal, but will it still
install on a modest 160GB drive?
Cheers,
Gavin.
___
Rivendell-dev mailing list
Tip: From what I understand, the values for seperation are carts, not
minutes.
Cheers,
Gavin.
- Original Message -
From: Brandon Sossamon brandon.sossa...@gmail.com
To: Rivendell-dev@lists.rivendellaudio.org
rivendell-dev@lists.rivendellaudio.org
Sent: Wednesday, March 12, 2014 2:21
How do you guys transistion to the next log? I noticed the bigger teh log
the longer the delay so I always use segue to the next log.
- Original Message -
From: Dan Gruner d...@loudaudio.co.uk
To: Rick rickc...@home.nl
Cc: User discussion about the Rivendell Radio Automation System
@lists.rivendellaudio.org
Sent: Thursday, March 13, 2014 12:26 PM
Subject: Re: [RDD] silence at log rotation
I use segue and the last item in the overscheduled log is always a hard
timed record but always a different one ofcourse
Gavin Stephens schreef op 13-3-2014 2:00:
How do you guys transistion to the next
routines.
- Original Message -
From: Rick rickc...@home.nl
To: Gavin Stephens ga...@stephens.net.nz
Sent: Thursday, March 13, 2014 1:57 PM
Subject: Re: [RDD] silence at log rotation
it's a hard timed make next on the last log item every day, so I do not
have any skipping issues
report added for Oceania stations
using Rivendell.
Paul.
-Original Message-
From: rivendell-dev-boun...@lists.rivendellaudio.org
[mailto:rivendell-dev-boun...@lists.rivendellaudio.org] On Behalf Of Gavin
Stephens
Sent: Saturday, 8 March 2014 9:59 p.m.
To: Rivendell Users Group
Subject
in the rivendell services screen
and the only two options I have is generate reports or purge data. Both do
nothing.
Hmm I'm sure it's something simple I'm missing but that's all I can think
of.
I've created a generic report in rdadmin
Sent from my iPod
On 8/03/2014, at 21:59, Gavin Stephens ga
It appears the problem with RDLogManager is that the service name doesn't show
up.
The service shows up in everything else such as under rdadmin, in rdairplay and
logged it etc... And the host is enabled for that service.
As soon as I do a restore of my database the service name won't show up
I was having a poke around in the downloads area. The DVD seems very large from
the old cd appliance. Is this just because of the OS bloat?
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
Man I really learnt how to screw up RD today. I renamed an event in
rdlogmanager without removing it from a clock. The. I lost all the events in y
clock bar about 2-3.
So I figured I'll just launch rdamin and do a DB restore. Only it froze trying
to a restore from a perfectly valid backup.
.
Sent from my iPod
On 21/02/2014, at 19:45, Gavin Stephens ga...@stephens.net.nz wrote:
Man I really learnt how to screw up RD today. I renamed an event in
rdlogmanager without removing it from a clock. The. I lost all the events in
y clock bar about 2-3.
So I figured I'll just launch rdamin
instead
of minutes.
I realise it takes time to do this but this should really be in the wiki or ROG
as its a pretty basic function of the scheduling setup process.
Cheers,
Gavin.
Sent from my iPod
On 10/02/2014, at 18:08, Gavin Stephens ga...@stephens.net.nz wrote:
Just a quick refresher
is there but doesn't load.
Is the last event the same each day or a different cart? If it's the same cart,
double check the last event prior to the log chain doesn't have a segue start
marker set prematurely to soon.
Cheers,
Gavin.
- Original Message -
From: Gavin Stephens
To: Pedro Picoto (TSF
1. Drag and drop of tracks in the log. Instead of having to use the
move button to move tracks around, if you could just drag and drop a
track to where you wanted it, it would be easier to use.
If it had this it should be optional check box or something. As I find it's
harder to bump a mouse
Actually I would be more likely to just split the long cart in question in to
two parts at an appriopriate point as close to 60 miuntes as possible. Then
schedule the legal ID in between, otherwise you're just going to have a train
wreck.
- Original Message -
From: Gavin Stephens
I think this may have sopose to have been sent to the list so I'm forwarding it
back there from Tim's comments sent to me twice privately. Replying to
individual users of the list by default is a real pain in the rear.
- Original Message -
From: Tim Camp
To: Gavin Stephens
Sent
Beat me to it Geoff. I was thinking similar, log output format for the
service.
Did you copy or import the audio and database? If so from root or user? It
does sound like the audio is missing, although the cut would normally come
up with a red label, I think the cart would too by memory?
Volume Logic is pretty old now, it became Octiv, then on to Breakaway Broadcast
processor/live etc... In saying that, I know old software is still handy, I use
an older but free MBL4 stand-alone processor that John Burnill (programmer
which I think had stuff to do with Inovonics once) released
a USB UART chip to give you a hotter level? IDTS.
-ap
- Original Message -
From: Gavin Stephens ga...@stephens.net.nz
Subject: Re: [RDD] M-Audio Delta 44 +4db Output
According to the manual, that card can only output +14dBu. So there's 10dB
robbed by not having a proper +24dBu output
The long winded version I sent off list before I noticed it's not replying
to the list by default :o)
- Original Message -
From: Cowboy c...@cwf1.com
To: rivendell-dev@lists.rivendellaudio.org
Sent: Saturday, August 17, 2013 4:43 AM
Subject: Re: [RDD] M-Audio Delta 44 +4db Output
of an
Aphex write up I read one day that much better explained it when making the
move to professional balanced gear in an analogue enviroment with PC's as a
digital storage system with a different metering system.
- Original Message -
From: Gavin Stephens ga...@stephens.net.nz
To: Rivendell
That's why I rely on external VU meters, and just apply or remove gain to
get the average level where I want it. I havent' used peak normalisation in
about 4 years.
And Jay: I feel your pain with aspect ratios.
- Original Message -
From: al davis ad...@freeelectron.net
To:
According to the manual, that card can only output +14dBu. So there's 10dB
robbed by not having a proper +24dBu output.
So if you are 'peak' normalising your files to say -13dBFS, the peak output
of the card when set to +4dBu will still only be +14dBu - 13dB (if peak
normlised files to RD
These are probably the most important wiki entries to browse over:
http://rivendell.tryphon.org/wiki/DHCP_vs._static_IP_addresses
http://rivendell.tryphon.org/wiki/Remote_Client_Access
http://rivendell.tryphon.org/wiki/NFS_Server_and_Client_Configuration
Some of it is OS specific like Ubunto
On a traditional tape cartridge, the cuts play in order.
Yes, there was no such thing as a random cut on an old cart machine. Because
cuts as they were, were all still in sequential order on a cart. So I fail
to truely see why Rivendell would not do this also.
I've just finished reading
Just remember, if you operate in Auto mode and have RD stopped for a live
break -if a timed event comes up it will crash in over top of any live
programming. That's the whole purpose of Auto.
Cheers,
Gavin.
- Original Message -
From: Andy Brown a...@thebmwz3.co.uk
To:
Talk start will set its self to immediately if you just set the talk end.
I can see the reasoning with the talk markers at the end of the track. This
would be confusing though if talent was watching the pie counter thinking
it's counting down to segue, or talk, or how would you know which? If
I haven't used the outcue field, but I'd imagine that the cut outcue field
shows on the entry in the players too like the description does.
- Original Message -
From: Alan Peterson apeter...@radioamerica.org
To: User discussion about the Rivendell Radio Automation System
You can't tell voice ramps much by waveform's either. A lot of times I'm
setting talk end markers I do it by guess at first, according to the
waveform, then when I hit play I realise the vocals start much earlier
etc...
- Original Message -
From: Alan Peterson
Hi all, I had a quick play with 2.0 last night. I know this only a cosmetic
thing but love 3D buttons such as the Kermic style in KDE. Does 2.5 allow you
to change the buttons on the sound panel? I tried this on 2.0 but the sound
panel buttons wouldn't change for me just the log buttons and
1 - 100 of 160 matches
Mail list logo