Am 09.06.2012 22:11, schrieb nev young:
Hi every one,
I had a phone call this evening from a friend who has a shed (actually
I think it's a shipping container) containing a large amount of Sam
spares.
This all has to go.
Rather than take it down to the tip or re-cycling centre he would
rat
A couple of disk controllers would be great and maybe a sound chip or 2
Great find tho
Andy
From: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] On
Behalf Of Simon Cooke
Sent: 09 June 2012 23:10
To: sam-users@nvg.ntnu.no
Subject: RE: Sam Hardware
Couple of Bare
Couple of Bare boards and a vlsi asic socket please :) I want to make a
flashier home for my golden asic ;)
http://mdfs.net/Docs/Comp/Z80/
theres loads of stuff mostly bbc related
he has a screenshot of bbc basic running on spectrum
was sam basic pretty much on the bbc basic nose so to speak
the darn thing only runs in external rom interface though i though the
tap file would run in ram or figure out ho
its not a micro processor then she cant do the full seven
input
output
load save
store retrieve
process
too many accumulators for freescape then
20mhz clock and one tstate instruction execution no use to the keypad
for the 128 then - certainly no room in IF1/mb-02+ already has dma ta
much - wouldnt
www.zilog.com/docs/z8encore/appnotes/an0123.pdf ·
and this one on page 2 of 12 says 4kb of registers each of which can
be accumulator
im reading this all wrong arent i this isnt a microprocessor liek teh
z80 its a dedicated thingi that only does what its programmed top do
program it to make vast c
ld sp,nn - address of 16bytes from end of screen$ in ram you wanna
dump to video ram - bit pointless on sam as you have 16 possible
screen$ in ram and could just change the vmpr to point to a fresh one
without having to move the ram to video ram in the first place -
unless you were moving it from e
ww.zilog.com/docs/z8encorexp/PB0164.pdf
2kb register ram im obviously mixed up
not that it could use this for a proportional font or copying video
ram from one place to another naturally its like the 256 bytes of
index the 65c12 has? cant be relocated to ram or converted from ascii
codes to text o
chris says it isnt quicker to use push for trasfner of screen$ from ram to ram
says ld hl is better but dunno as he is too busy to explain
On 24 September 2011 20:53, Roger Jowett wrote:
> my mistake 512 but arent they 16bit?
>
>
> On 19 September 2011 01:46, wrote:
>> Quoting Roger Jowett :
>>
my mistake 512 but arent they 16bit?
On 19 September 2011 01:46, wrote:
> Quoting Roger Jowett :
>
>> doesnt z8 have 4096 registers?
>
> Not according the CPU World
>
> http://www.cpu-world.com/CPUs/Z8/
>
Quoting Roger Jowett :
still cant run 128 stuff and as for rzx or +d hacker fatchance!
Well as the paging system for SAM was never designed to be 128K
compatible, and the +d hacker used shadow ram on the plus D
interface.. that may explain why it isn't so easy
David
PS: Sig warning incl
Quoting Roger Jowett :
doesnt z8 have 4096 registers?
Not according the CPU World
http://www.cpu-world.com/CPUs/Z8/
doesnt z8 have 4096 registers?
woudl that be better for 3d vector stuff or doesnt it work like that?
20mhz but more like r800 performance no?
On 18/09/2011, Roger Jowett wrote:
> no thanks!
> just about had my fill of sam software
> was desperate to get tasword +2 working having gone thru the rig
no thanks!
just about had my fill of sam software
was desperate to get tasword +2 working having gone thru the rigmarole
of converting it for the +D using the tascon thing from format so
figured they might at least convert it to sam seeing as the disc
system was reasonably similar
its taken me ten
Hee hee - Roger - you really should read the thread before replying !!
I started the thread with a link to some auctions for SAM Software (now
sold), and the statement:
"I also have 7 SAM formatted floppies free to a good home (for the cost
of postage) - they have various hand written labels
sorry what software? there isn't any for sam is there?!
I'm still trying to get a 48 emulator that can run code from 32768 in
Sam's external ram!
On 4 September 2011 12:36, Rich Mellor wrote:
> Hi Roger,
>
> I received the stamps (thankyou) but your letter did not refer to the
> software - do you
Hi Roger,
I received the stamps (thankyou) but your letter did not refer to the
software - do you want me to send this software to you and you can have
a look (was that the plan?)
Rich
On 04/09/2011 11:37, Roger Jowett wrote:
u didnt get any stamps? big thanks by the way
On 27/08/2011, Ric
u didnt get any stamps? big thanks by the way
On 27/08/2011, Rich Mellor wrote:
> Hi Thomas,
>
> Yes, SellMyRetro.com is its own auction system, similar to eBay but
> without the extortionate listing and final value fees.
>
> You can of course send messages on the system and so long as I know tha
Rich - if these are finished programs - then I'm sure Colin can make a
good home for them for release!
Quoting Rich Mellor :
Good evening,
I have listed a few bits of SAM hardware and software on sellmyretro.com -
http://www.sellmyretro.com/category/All+categories/Retro+Computers/SAM+Coup%
Hi Thomas,
Yes, SellMyRetro.com is its own auction system, similar to eBay but
without the extortionate listing and final value fees.
You can of course send messages on the system and so long as I know that
people want me to hold onto items for them at the end of the auction, I
don't mind wa
I've wanted to see DRiVER for a while, having read the first three
Inside Macintoshes a few years ago and the Smalltalk-80 book a little
before that. It'd be interesting to play about with.
But how does sellmyretro work? I notice the items listed as bids
rather than purchases aren't also on eBay,
On Mon, Apr 17, 2000 at 07:10:24PM +0100, Dave Hooper wrote:
> so I just deleted it. I assume it was some kind of an advert, yes?)
It was, indeed, a Sam hardware price list. In the form of some text
printed on a sheet of paper and scanned in at about 150dpi.
imc
dvert, yes?)
dave
- Original Message -
From: "Ian Collier" <[EMAIL PROTECTED]>
To: ; <[EMAIL PROTECTED]>
Sent: Monday, April 17, 2000 11:08 AM
Subject: Re: Sam hardware
> On Sat, Apr 15, 2000 at 02:56:51PM +0100, Leonard Bennett wrote:
> > From: "Leonar
> That was *incredibly* stupid%. Please don't do it again.
>
> I imagine the sam-users size-filter stopped it from going to the list,
> which is a small mercy.
In case you want to see the beast in question it's up at
http://www.podboy.demon.co.uk/coupe/bennett_sam_pricelist.gif as there
doesn't
On Sat, Apr 15, 2000 at 02:56:51PM +0100, Leonard Bennett wrote:
> From: "Leonard Bennett" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>,
> <[EMAIL PROTECTED]>, ,
> <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
Followed by:
attachment of type multipart/alter
25 matches
Mail list logo
