Hey guys,
Just wanted to update this thread, I upgrade my samba installation to 4.1
and updated SOA record. Now dynamic DNS works fine for me!! Thanks for
implementing the feature!!!
Cheers!!
2013/8/9 Rustam K. rkovh...@gmail.com
I thought I would update this email thread. So far editing the
Hi All,
I currently have another thread open on squid authentication with Samba
4 and am going to try authenticating against kerberos instead of NTLM.
According to the docs for the web filter I'm using, it's essential for
Kerberos to be able to resolve reverse DNS so I've spent the last
Hi, guys...
What line command for modify SOA record?
Thanks!
Jacó Ramos
2013/10/14 Rustam K. rkovh...@gmail.com
Hey guys,
Just wanted to update this thread, I upgrade my samba installation to 4.1
and updated SOA record. Now dynamic DNS works fine for me!! Thanks for
implementing the
I have two samba 4 AD DC running using the internal DNS. On one of them, DNS
will fail after a short time (10-15 minutes). Restarting samba on this AD DC
corrects the issue temporarily. This behavior started about 2 weeks ago. We had
not made any changes to either system during this time so it
it is much clearer,
thanks again for your help
On Oct 11, 2013 5:23 AM, Andrew Bartlett abart...@samba.org wrote:
On Mon, 2013-10-07 at 23:46 +0300, Nikos Mitas wrote:
sorry, but can you give me more details about 'full build tree' ?
What I was suggesting is that the perf.data file isn't
Hi List,
Looking for assistance with a squid authentication problem against Samba 4.
The squid proxy we're using worked fine on our old Samba 3 domain with
500+ users but keeps freezing on our new Samba 4 domain. I've joined
the proxy using net ads join and the samba 4 network is a clean
On Thu, 2013-10-10 at 16:36 +0100, Julian Pilfold-Bagwell wrote:
Hi List,
Looking for assistance with a squid authentication problem against Samba 4.
The squid proxy we're using worked fine on our old Samba 3 domain with
500+ users but keeps freezing on our new Samba 4 domain. I've
On Mon, 2013-10-07 at 23:46 +0300, Nikos Mitas wrote:
sorry, but can you give me more details about 'full build tree' ?
What I was suggesting is that the perf.data file isn't something I can
use directly. I need you to run 'perf report -g' on it, and do some of
the investigation, because it
Hello again,
all three samba4 DC's have 16 GB RAM each and 2 sockets with 4 cores each
(total 8 cores each) the three DC's and the identity manager are in the
same VLAN.
but today i noticed that during bulk load only one core is busy 100% and
the rest are idle. i was unable to run samba under
On Mon, 2013-10-07 at 22:52 +0300, Nikos Mitas wrote:
Hello again,
all three samba4 DC's have 16 GB RAM each and 2 sockets with 4 cores each
(total 8 cores each) the three DC's and the identity manager are in the
same VLAN.
but today i noticed that during bulk load only one core is busy
sorry, but can you give me more details about 'full build tree' ?
2013/10/7 Andrew Bartlett abart...@samba.org
On Mon, 2013-10-07 at 22:52 +0300, Nikos Mitas wrote:
Hello again,
all three samba4 DC's have 16 GB RAM each and 2 sockets with 4 cores each
(total 8 cores each) the three
Hello,
i have successfully installed samba 4 on three vmware VM's and everything
works fine (join pc to domain, user login, dns updates, ntp),
but i am facing some performance problems during users bulk loading.
my environment:
1st DC: RedHat Linux v6.4,samba 4.1rc4,dns 9.9.3P2,ntp
2nd DC:RedHat
On Sun, 2013-10-06 at 13:48 +0300, Nikos Mitas wrote:
Hello,
i have successfully installed samba 4 on three vmware VM's and everything
works fine (join pc to domain, user login, dns updates, ntp),
but i am facing some performance problems during users bulk loading.
my environment:
1st
Save yourself a lot of pain. Update to Ubuntu 12, at least, to keep your
Samba 4 releases up to date.
On Thu, Oct 3, 2013 at 10:03 PM, Derek Lewis dle...@mtu.edu wrote:
Hello,
I want to upgrade my current samba 3.7 that I compiled, to samba 4, and
wondered if I can get binaries compatible
Hello,
I want to upgrade my current samba 3.7 that I compiled, to samba 4, and
wondered if I can get binaries compatible with Ubuntu 10?
Sent from my iPhone
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
Hi,
I am trying to get vfs_recycle working on Samba 4, I compiled Samba 4
myself, so the man page for vfs_recycle is in:
/usr/local/samba/share/man/man8/vfs_recycle.8
I have the recycle bin working on a share, the problem I have is with
lists, for instance, how to list which files to exclude.
My apologies if this is something of a FAQ, but I would be grateful of
some assistance. I am evaluating Samba 4 and would like to be able to
create packages for installation on RHEL and CentOS 6.x servers. I've
cloned the git repository and checked out tag 4.0.9, then used the
Hi
You have updated precompiled packages from Sernet at
http://enterprisesamba.com/ (for Samba 3 and Samba 4, although you have to
register to use the Samba 4 repository). I have tried it and they works
fine.
Regards.
2013/9/19 Malcolm Cowe malk...@gmail.com
My apologies if this is something
On Fri, 2013-09-13 at 09:54 +0100, Rowland Penny wrote:
On 13/09/13 09:34, steve wrote:
Hi
I re-read your post with all the info and found these:
DEFAULT_MASTER_MAP_NAME=CN=auto.master,CN=HOME,CN=defaultMigrationContainer30,DC=hh3,DC=site
Hello!
I tried to install samba 4 as described in the samba AD DC HOWTO.
Here my configuration:
ubuntu 12.04 server 64 bit server
/etc/network/interfaces:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
address
It looks like you're not pointing to yourself for DNS. Check to make sure
DNS is working correctly (especially the SRV kerberos records for this
issue).
On Mon, Sep 9, 2013 at 4:31 AM, Alexander Busam
a.bu...@hofmann-foerdertechnik.com wrote:
Hello!
I tried to install samba 4 as described
I've installed Samba 4.09 on ubuntu with bind 9.8.1-P1, the former compiled
from git source and the latter installed from apt-get. I'm migrating from an
existing Windows 2008 SBS domain controller that I want to retire (and be
Windows free on the server side), and have followed the instructions
On Wed, 2013-09-04 at 17:53 +0100, Chris Alavoine wrote:
Hi folks,
Have been battling with this for a while.
I have a Debian 6/Samba 4 install working nicely. Have migrated my old
Samba 3 domain and can see all users/groups via AD management tools fine.
I am now trying to get the *nix
Hi folks,
Have been battling with this for a while.
I have a Debian 6/Samba 4 install working nicely. Have migrated my old
Samba 3 domain and can see all users/groups via AD management tools fine.
I am now trying to get the *nix side sorted. Have followed the guide here:
Hi,
I test samba 4 for AD authentification and file-server usage.
My file-server use posix ACL (XFS filesystem) for manage acces between
user.
So I must use some trick (steve posix-tify script) for adding
posixAccount to activedirectory tree.
But my questions are :
who use samba 4
On Fri, 2013-08-30 at 11:25 +0200, Stéphane PURNELLE wrote:
Hi,
I test samba 4 for AD authentification and file-server usage.
My file-server use posix ACL (XFS filesystem) for manage acces between
user.
So I must use some trick (steve posix-tify script) for adding
posixAccount to
Hi,
I have a big problem.
I see that samba 4 don't have bad lockout attempts and if samba don't have
this, I cannot deploy samba 4.
This setting is a security setting, it's very important.
A virus attack can be modered by this setting (password crack) and the
security bookfor IS from my
-Oorspronkelijk bericht-
Van: stephane.purne...@corman.be
[mailto:samba-boun...@lists.samba.org] Namens Stéphane PURNELLE
Verzonden: vrijdag 30 augustus 2013 12:27
Aan: samba@lists.samba.org
Onderwerp: [Samba] Samba 4 and bad lockout attempts
Hi,
I have a big problem.
I see that samba 4
Admin. Systèmes et Réseaux
Service Informatique Corman S.A. Tel : 00 32 (0)87/342467
samba-boun...@lists.samba.org wrote on 30/08/2013 11:57:18:
De : steve st...@steve-ss.com
A : samba@lists.samba.org,
Date : 30/08/2013 11:58
Objet : Re: [Samba] Samba 4 file-server usage
I have upgraded from Samba 3 to Samba 4 for authentication (Windows and Linux
authentication are working). Samba 4 is acting as the DC.
However, there are some issues that I can't resolve involving both profiles and
automatic home folder mapping.
I have 3 samba servers that are at Samba 3.5
I've just setup a samba4 system (zentyal) to act as authentication and
file server in a mixed lan (windows and linux clients).
The problem is that my linux pcs and windows winxp clients point to a
username folder on the server, while the windows7 clients point to a
username.V2 folder.
This is
-
Van: i...@antonellofacchetti.it
[mailto:samba-boun...@lists.samba.org] Namens antonello
Verzonden: dinsdag 13 augustus 2013 14:33
Aan: samba@lists.samba.org
Onderwerp: [Samba] samba 4 and roaming profiles
I've just setup a samba4 system (zentyal) to act as authentication and
file server
: Re: [Samba] Samba 4 LDAP NTLM password nightly injection
Ok this works:
#!/usr/bin/env python
import sys
sys.path.insert(0, /usr/local/samba/lib64/python2.6/site-packages)
sys.path.insert(1, /usr/local/samba/lib
...@lists.samba.org] Namens antonello
Verzonden: dinsdag 13 augustus 2013 14:33
Aan: samba@lists.samba.org
Onderwerp: [Samba] samba 4 and roaming profiles
I've just setup a samba4 system (zentyal) to act as authentication and
file server in a mixed lan (windows and linux clients).
The problem
@lists.samba.org, Andrew Bartlett abart...@samba.org
Sent: Tuesday, August 13, 2013 11:03:40 AM
Subject: Re: [Samba] Samba 4 LDAP NTLM password nightly injection
Luc,
Very helpful... I'm doing a migration from a very non-standard samba
ldap implementation that we can't just migrate. We
On Thu, 2013-08-08 at 17:14 +0100, Julian Pilfold-Bagwell wrote:
Hi All,
I'm setting up a Samba AD domain which works perfectly with the WIn 7
server tools and so far everything is going fine. What has me stumped
is setting up an LDAP proxy in our DMZ against which I can authenticate
Hello Julian,
Am 08.08.2013 18:14, schrieb Julian Pilfold-Bagwell:
I'm setting up a Samba AD domain which works perfectly with the WIn 7
server tools and so far everything is going fine. What has me stumped
is setting up an LDAP proxy in our DMZ against which I can authenticate
our email and
Hi All,
I'm setting up a Samba AD domain which works perfectly with the WIn 7
server tools and so far everything is going fine. What has me stumped
is setting up an LDAP proxy in our DMZ against which I can authenticate
our email and web services.
I've got port 389 open on my main Samba 4
Hi,
thanks for the follow up.
I found the SOA record via ADSI edit :
DC=@,DC=officenet.local,CN=MicrosoftDNS,DC=DomainDnsZones,DC=officenet,DC=local
DC=@,DC=_msdcs.officenet.local,CN=MicrosoftDNS,DC=ForestDnsZones,DC=officenet,DC=local
there are two of them,and every one of them has attribute
I thought I would update this email thread. So far editing the records via
ADSI messes up ldb database, if you do that zones won't load anymore, just
like Dmitry stated in his first email.
I had to revert to a snapshot to get samba back, up and running.
I am curious If I have to modify record
On 2013-08-07 14:56, Rustam K. wrote:
Thank you for you emails. Unfortunately samba tool can't update SOA
records.
IIRC that was fixed recently, but you seem to be running 4.0 rc3, if I
understand the email correctly. That misses a lot of bug fixes, some for
DNS as well.
Cheers,
Kai
--
Hello,
I run samba 4.0.7, samba tool can't do the job, at least help/syntax
doesn't show that I can
Cheers
2013/8/8 Kai Blin k...@samba.org
On 2013-08-07 14:56, Rustam K. wrote:
Thank you for you emails. Unfortunately samba tool can't update SOA
records.
IIRC that was fixed recently,
On 2013-08-08 10:02, Rustam K. wrote:
Hello,
I run samba 4.0.7, samba tool can't do the job, at least help/syntax
doesn't show that I can
Ah, yes. Apparently this functionality only exists in 4.1 and master, sorry.
Should you try and run with that the command syntax is
samba-tool dns update
Hello Andrew,
Thanks for your reply.
We did try with following settings:
smb.conf
null passwords = Yes
minimum password lenght set to 0
We set the password over a Windows 7 client.
Thanks a lot
Oliver
Kerberos: Looking for ENC-TS
On Thu, Aug 8, 2013 at 4:14 AM, Kai Blin k...@samba.org wrote:
On 2013-08-08 10:02, Rustam K. wrote:
Hello,
I run samba 4.0.7, samba tool can't do the job, at least help/syntax
doesn't show that I can
Ah, yes. Apparently this functionality only exists in 4.1 and master, sorry.
Should you
Thank you for you emails. Unfortunately samba tool can't update SOA
records.
I'll stick to Dmitry's action plan
Cheers
2013/8/7 Matthieu Patou m...@samba.org
On 08/06/2013 02:34 PM, Rustam K. wrote:
Hello,
I have the very same problem, does anybody know a way?
I am thinking of
Hello,
We are trying to setup a SAMBA-Server with users that have empty passwords.
We are using:
Samba 4.0.8
Kernel 3.10.5
Slackware 14.0 x64
When we set a password the login successes!
That's what we get when trying to login:
[2013/08/07 13:31:46, 3]
On Wed, 2013-08-07 at 13:56 +, Fink Oliver wrote:
Hello,
We are trying to setup a SAMBA-Server with users that have empty passwords.
We are using:
Samba 4.0.8
Kernel 3.10.5
Slackware 14.0 x64
When we set a password the login successes!
That's what we get when trying to login:
Hi Steve,
when I start samba without the 'server services' optinion I get:
At this time the 'samba' binary should only be used for either: 'server
role = active directory domain controller' or to access the ntvfs file
server with 'server services= +smb' oder the rpc proxy with 'dcerpc
On Tue, 2013-08-06 at 09:21 +0200, Klaus Rörig wrote:
But there are no smb/nmbd/winbindd binaries.
Hi
Oh, I see. The Ubuntu packages must only be for AD then. Sorry, I missed
that you only wanted ntvfs.
--
To unsubscribe from this list go to the following URL and read the
instructions:
OK, than I have to use the Samba 3.6 packages shipped with Ubuntu.
Anything special I have to care about?
Am 06.08.2013 09:33, schrieb steve:
On Tue, 2013-08-06 at 09:21 +0200, Klaus Rörig wrote:
But there are no smb/nmbd/winbindd binaries.
Hi
Oh, I see. The Ubuntu packages must only be for
On Tue, 2013-08-06 at 10:57 +0200, Klaus Rörig wrote:
OK, than I have to use the Samba 3.6 packages shipped with Ubuntu.
Anything special I have to care about?
Hi, no, but as you have only a few clients, it may be simpler to use the
dc itself as file server, especially as you have specified
Hi,
it seems that the ntvfs module is not working on Ubuntu, I get lots of
error messages about this.
I don't see Samba4 servers on network neighborhood, so users cannot
browses shares but I do see Samba3 servers, so I have to get Samba3
working with Samba4.
Or I have to build Samba4 by
On Tue, 2013-08-06 at 12:36 +0200, Klaus Rörig wrote:
Hi,
it seems that the ntvfs module is not working on Ubuntu, I get lots of
error messages about this.
I don't see Samba4 servers on network neighborhood, so users cannot
browses shares but I do see Samba3 servers, so I have to get
Hi!
I set up s3 on the fileserver now but I cannot connect to my share.
'wbinfo -u' lists all user
'wbinfo-g' lists all groups
getent also list the queried user.
But when I try to connect from Win7 to my s3 share, it asks for creds
but does not accept any. I cannot see any log entries.
On Tue, 2013-08-06 at 14:34 +0200, Klaus Rörig wrote:
Hi!
I set up s3 on the fileserver now but I cannot connect to my share.
'wbinfo -u' lists all user
'wbinfo-g' lists all groups
getent also list the queried user.
But when I try to connect from Win7 to my s3 share, it asks for
Hi!
Authentication works when I set 'password server = server01', but then
testparm complains:
WARNING: The setting 'security=ads' should NOT be combined with the
'password server' parameter.
(by default Samba will discover the correct DC to contact automatically).
But Samba doesn't. DNS is
How does your /etc/krb5.conf file look?
On Tue, Aug 6, 2013 at 2:21 PM, Klaus Rörig kroe...@gmail.com wrote:
Hi!
Authentication works when I set 'password server = server01', but then
testparm complains:
WARNING: The setting 'security=ads' should NOT be combined with the
'password server'
Hello,
I have the very same problem, does anybody know a way?
I am thinking of converting to BIND, modifying and then converting it back
to Internal DNS implementation.
Hello.
How could one modify a SOA record in rc3? For example, NS part (not NS
record) of SOA record points to an absent
How could one modify a SOA record in rc3? For example, NS part (not NS
record) of SOA record points to an absent Windows server. This effectively
breaks DNS updates, since there is no such server and if corresponding A
record is added, update requests from clients will come unsigned.
On 08/06/2013 02:34 PM, Rustam K. wrote:
Hello,
I have the very same problem, does anybody know a way?
I am thinking of converting to BIND, modifying and then converting it back
to Internal DNS implementation.
Did you had a look at samba-tool dns update to do this ?
Kai has a good experience
On 07/27/2013 08:20 AM, Kinglok, Fong wrote:
Dear all,
After using samba 3 for two years, I have just spent totally one week finishing
setting up a samba 4 file system in my working school. There are about 200
computers, 80+ staff, 1000 students and 10 printers. The AD was properly
setup,
Hello list,
I'm trying to setup a small samba4 domain ( 1 DC, 1 member server, 12 Win7
clients) on Ubuntu with the packages shipped with Ubuntu 13.04 (Samba
4.0.0), I also tried on Ubuntu 13.10 (Samba 4.0.3).
DC seems to work fine, I can manage users an gpo, clients can join and
logon. But I
On Mon, 2013-08-05 at 22:25 +0200, Klaus Rörig wrote:
I cannot the member server working.
My smb.conf:
Hi
Leave the domain and remove the .tdb files in /var/lib/smb. Then rejoin
with this:
[global]
workgroup = VERWALTUNG
security = ads
realm =
I realize that Samba 4 doesn't yet support DFS replication. But my question is
if Samba 4 as an AD server supports DFS replication within the environment. For
example, if all we have are Samba 4 servers for AD domain controllers, and we
have 2+ Windows servers doing DFS between each other
On Mon, 2013-08-05 at 17:24 -0500, Kristofer Pettijohn wrote:
I realize that Samba 4 doesn't yet support DFS replication. But my
question is if Samba 4 as an AD server supports DFS replication within
the environment. For example, if all we have are Samba 4 servers for
AD domain controllers,
On 29 Jul, 2013, at 1:13 PM, Andrew Bartlett abart...@samba.org wrote:
On Sat, 2013-07-27 at 23:20 +0800, Kinglok, Fong wrote:
Dear all,
After using samba 3 for two years, I have just spent totally one week
finishing setting up a samba 4 file system in my working school.
There are about
On Wed, 2013-07-31 at 10:07 +0800, Kinglok, Fong wrote:
On 29 Jul, 2013, at 1:13 PM, Andrew Bartlett abart...@samba.org wrote:
On Sat, 2013-07-27 at 23:20 +0800, Kinglok, Fong wrote:
Dear all,
After using samba 3 for two years, I have just spent totally one week
finishing setting up
Complete new user here. Setting up my first samba configuration, using
samba 4.0.6 as a primary domain controller. I have user profiles, network
shares, active directory, and domain controller working. But I can not
understand how to map windows userid to linux userid (and map groupid as
well).
On Sat, Jul 27, 2013 at 8:20 AM, Kinglok, Fong busywa...@gmail.com wrote:
Dear all,
After using samba 3 for two years, I have just spent totally one week
finishing setting
up a samba 4 file system in my working school. There are about 200 computers,
80+ staff, 1000 students and 10
On Tue, 2013-07-09 at 18:22 -0700, Nick B wrote:
Hi
None of this works on a s4 DC
# Setup user maps
idmap config * : backend = tdb
idmap config * : range = 10-19
idmap config MYDOMAIN : backend = ad
idmap config MYDOMAIN : schema_mode = rfc2307
idmap config MYDOMAIN :
On Sat, 2013-07-27 at 23:20 +0800, Kinglok, Fong wrote:
Dear all,
After using samba 3 for two years, I have just spent totally one week
finishing setting up a samba 4 file system in my working school.
There are about 200 computers, 80+ staff, 1000 students and 10
printers. The AD was
Dear all,
After using samba 3 for two years, I have just spent totally one week finishing
setting up a samba 4 file system in my working school. There are about 200
computers, 80+ staff, 1000 students and 10 printers. The AD was properly
setup, mandatory profile and one GPO policy (which is
I have installed samba from source (I've tried both V4-0-stable and
v4-1-stable) using BIND9_DLZ on Ubuntu server 13.04 and I'm unable to
get samba_dnsupdate to function.
# samba_dnsupdate --all-names --fail-immediately
will return
dns_tkey_negotiategss: TKEY is unacceptable
If I then try
This has now been fixed - apparmor was preventing bind from writing to
the /var/tmp directory.
On 13-07-26 09:22 AM, Dave Hawkes wrote:
I have installed samba from source (I've tried both V4-0-stable and
v4-1-stable) using BIND9_DLZ on Ubuntu server 13.04 and I'm unable to
get samba_dnsupdate
On Wed, 2013-07-24 at 22:34 -0400, Ryan Bair wrote:
I'm running Samba 4.0.7 on CentOS 6.4 as a AD DC with s3fs.
I have a shared directory with the setgid bit set. From the shell on the
server, new files and directories inherit the group as expected. However,
new items created through samba
Thank you for confirming. I do have g+s on the directory. I'll file a bug
about this issue today.
On Thu, Jul 25, 2013 at 3:30 AM, steve st...@steve-ss.com wrote:
On Wed, 2013-07-24 at 22:34 -0400, Ryan Bair wrote:
I'm running Samba 4.0.7 on CentOS 6.4 as a AD DC with s3fs.
I have a
On Thu, 2013-07-25 at 08:17 -0400, Ryan Bair wrote:
Thank you for confirming. I do have g+s on the directory. I'll file a
bug about this issue today.
No problem. If you go with the bugzilla, could you post the link here?
Thanks.
--
To unsubscribe from this list go to the following URL and
folks, and have a great week/weekend,
Cheers,
Tris.
-Original Message-
From: Tris Mabbs [mailto:tm-samba201...@firstgrade.co.uk]
Sent: 15 March 2013 17:59
To: Andrew Bartlett
Cc: 'Michael Wood'; Guenther Deschner; samba@lists.samba.org;
samba-techni...@samba.org
Subject: RE: [Samba] Samba
I'm running Samba 4.0.7 on CentOS 6.4 as a AD DC with s3fs.
I have a shared directory with the setgid bit set. From the shell on the
server, new files and directories inherit the group as expected. However,
new items created through samba get the user's primary group instead.
Config for the
Hi there,
Just to add I've been using Ubuntu as my distro of choice (cos it's the one
I know best). Has anyone had any successes with other Distros they could
share? I am willing to jump ship if it works!
Thanks,
Chris.
On 12 July 2013 15:21, Chris Alavoine chr...@acs-info.co.uk wrote:
Hi
On Tue, 2013-07-16 at 09:40 +0100, Chris Alavoine wrote:
Hi there,
Just to add I've been using Ubuntu as my distro of choice (cos it's the one
I know best). Has anyone had any successes with other Distros they could
share? I am willing to jump ship if it works!
Hi
openSUSE. One install we
Hi there,
I would like to setup a Samba 4 member server to act as a separate
fileserver within my Samba 4 domain.
Does anyone have any recommendations for this setup?
I've tried to create one following this:
https://wiki.samba.org/index.php/Samba4/Domain_Member
Which seems to work ok until I
On Fri, 2013-07-12 at 15:21 +0100, Chris Alavoine wrote:
Hi there,
I would like to setup a Samba 4 member server to act as a separate
fileserver within my Samba 4 domain.
Does anyone have any recommendations for this setup?
I've tried to create one following this:
On Wed, 2013-07-03 at 12:28 +0100, GUEI née worou noee wrote:
Hi,
i upgrade on a new server samba3 to samba4 with a LDAP Backend.
I have followed this HowTO
http://wiki.samba.org/index.php/Samba4/samba-tool/domain/classicupgrade/HOWTO
until de classicupgrade step
Here is the errors I get
Hi,
i upgrade on a new server samba3 to samba4 with a LDAP Backend.
I have followed this HowTO
http://wiki.samba.org/index.php/Samba4/samba-tool/domain/classicupgrade/HOWTO
until de classicupgrade step
Here is the errors I get
/usr/local/samba/bin/samba-tool domain classicupgrade
Troubleshooting steps fail. Trying to replace a standalone Netware
server with a Samba4 server with AD. To isolate this test setup,
changed server's static IP address and separated the wiring. Then
went through the Troubleshooting portion of The Samba Checklist. Some
tests pass. Some tests
On Fri, 2013-06-28 at 14:09 +0800, Mail Robot wrote:
Hi everyone,
I am new to this mailing list.
At the moment I would like to migrate all of my users from Microsoft Active
Directory to Open Source, and what I have in mind is getting it into Samba
4.
In extending the functionality of
Hi everyone,
I am new to this mailing list.
At the moment I would like to migrate all of my users from Microsoft Active
Directory to Open Source, and what I have in mind is getting it into Samba
4.
In extending the functionality of it, I decided to intergrate FreeIPA as
the backend to Samba 4.
Using Ubuntu 10.04 LTS 32-bit. Tried following the wiki to install an
additional DC in an existing AD domain. Here are the steps I took:
1. Installed the Ubuntu prerequisites and then I built from source. It
compiled and installed successfully to /usr/local/samba
2. Skipped Step 1
Hello Dino,
Am 11.06.2013 17:11, schrieb Dino Edwards:
Using Ubuntu 10.04 LTS 32-bit. Tried following the wiki to install an
additional DC in an existing AD domain. Here are the steps I took:
1. Installed the Ubuntu prerequisites and then I built from source. It
compiled and installed
Kinit doesn't have output on all systems (ubuntu is one of them) after
running that, klist should show that you have an active ticket. Also do
what Marc says samba -i -M single and see where samba is failing the
startup.
Ricky
On Tue, Jun 11, 2013 at 10:38 AM, Marc Muehlfeld
On 6/11/2013 10:58 AM, Ricky Nance wrote:
Kinit doesn't have output on all systems (ubuntu is one of them) after
running that, klist should show that you have an active ticket. Also do
what Marc says samba -i -M single and see where samba is failing the
startup.
If I migh add issue the command
I'm pretty sure I did unless I'm missing something. According to what I'm
reading, the very first step is running the kinit administrator command which
of course shows no output on the screen. So, to address the second suggestion
when I run:
/usr/local/samba/sbin/samba -i -M single
I get
-Original Message-
From: samba-boun...@lists.samba.org [mailto:samba-
boun...@lists.samba.org] On Behalf Of David González Herrera -
[DGHVoIP]
Sent: Tuesday, June 11, 2013 12:02 PM
To: Ricky Nance
Cc: samba@lists.samba.org
Subject: Re: [Samba] Samba 4 Additional DC existing domain
Kinit doesn't have output on all systems (ubuntu is one of them)
after
running that, klist should show that you have an active ticket.
Running:
Klist
I get the following:
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: Administrator@MYDOMAIN.LOCAL
Valid starting Expires
Am 11.06.2013 18:21, schrieb Dino Edwards:
samba version 4.0.6 started.
Copyright Andrew Tridgell and the Samba Team 1992-2012
At this time the 'samba' binary should only be used for either:
'server role = active directory domain controller' or to access the ntvfs file
server with 'server
You haven't answered my previous question:
Did you followed *all* steps from the
http://wiki.samba.org/index.php/Samba4/HOWTO/Join_a_domain_as_a_DC
HowTo? I didn't saw, in the steps you had listed, that you joined
the domain, etc.
I believe I answered it albeit indirectly. One of
did you put in a
dns forwarder = ip.of.external.dns.server
line?
2013/6/11 Dino Edwards dino.edwa...@mydirectmail.net
You haven't answered my previous question:
Did you followed *all* steps from the
http://wiki.samba.org/index.php/Samba4/HOWTO/Join_a_domain_as_a_DC
HowTo? I
Hello Dino,
Am 11.06.2013 22:04, schrieb Dino Edwards:
I believe I answered it albeit indirectly. One of the first steps of
joining a domain as a DC was to run the kinit command and upon success
proceed with joining the domain. Since I wasn't getting any output from
running that command, I
1 - 100 of 911 matches
Mail list logo
