On 07/04/2010 08:32 PM, Nicolas Martin wrote:
As far as I understand, you are using your scanner with Ethernet or Wifi
connection. And it tries to communicate with an IP address, but in
message, we can read both:
Failed to open device 'pixma:MX350_192.167.1.88': Invalid argument.
Sorry,
Nicolas Martin nicolas0martin at gmail.com writes:
Le dimanche 04 juillet 2010 ? 01:33 +, John a ?crit :
Guenther Hutzl guenther.hutzl at googlemail.com writes:
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for
the
Le dimanche 04 juillet 2010 ? 23:14 +0200, Guenther Hutzl a ?crit :
On 07/04/2010 08:32 PM, Nicolas Martin wrote:
As far as I understand, you are using your scanner with Ethernet or Wifi
connection. And it tries to communicate with an IP address, but in
message, we can read both:
Failed
Guenther Hutzl guenther.hutzl at googlemail.com writes:
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for the
MX350
from:
http://software.canon-europe.com/products/0010836.asp
Using the rpms from that source I have text
Le dimanche 04 juillet 2010 ? 01:33 +, John a ?crit :
Guenther Hutzl guenther.hutzl at googlemail.com writes:
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for
the
MX350
from:
Hello!
I have some good and some bad news! The scanner of my MX350 was once
working perfectly with the patch you provided. Thanks for all the great
work you are doing here! I really appreciate it. But now I cannot get it
to work any more and I don't know why.
Here is what I have done:
1. I have
Have you tried power cycling the scanner?
allan
On Sun, Jul 4, 2010 at 11:30 AM, Guenther Hutzl
guenther.hutzl at googlemail.com wrote:
Hello!
I have some good and some bad news! The scanner of my MX350 was once
working perfectly with the patch you provided. Thanks for all the great
work
Yes, I have, if you mean pressing the power button on the printer which
switches is on/off. I should have said that in my previous post. I have
not yet tried to disconnect it from the power and wait a few seconds or
so. I will try that but I doubt it will help.
Thanks for the answer.
On
Unbelievable! Power cycling was the answer. I have unplugged the printer
from the power (pulled the power plug) and waited for about 30sec. Then
I reconnected the printer and switched it on again. Now I can scan like
a charm.
But probably we should try to diagnose this problem a little further. I
As far as I understand, you are using your scanner with Ethernet or Wifi
connection. And it tries to communicate with an IP address, but in
message, we can read both:
Failed to open device 'pixma:MX350_192.167.1.88': Invalid argument.
and
scanimage: open of device pixma:MX350_192.168.1.88
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for the
MX350
from:
http://software.canon-europe.com/products/0010836.asp
Using the rpms from that source I have text printing partly working over
wireless which is more than I could
Le samedi 03 juillet 2010 ? 09:05 +0200, Guenther Hutzl a ?crit :
On 07/02/2010 10:19 PM, John wrote:
If you haven't got it working yet, you might try the canon drivers for the
MX350
from:
http://software.canon-europe.com/products/0010836.asp
Using the rpms from that source I
If you can provide the USB pid for this model, we could try a quick
test, as there's some chance that this model behaves like a MX340 or
MX330, which are already supported. To get this, simply issue a lsusb ,
the usb pid should be in the list shown.
This is the output of lsusb for the
Could you try to recompile Sane with the attached file.
Place it in sane-backends/backend to replace current git one, and
recompile/reinstall Sane.
Nicolas
Le samedi 03 juillet 2010 ? 15:33 +0200, Guenther Hutzl a ?crit :
If you can provide the USB pid for this model, we could try a quick
Guenther Hutzl guenther.hutzl at googlemail.com writes:
Hello!
I have a Canon PIXMA MX350 Multifunction device and found out that the
scanner in this model is not yet supported by the sane-pixma driver. Is
there anybody out there who could help me getting it to work with my
scanner?
PIXMA MX350 is not yet declared in the Sane pixma backend, so it won't
be detected.
Do you have the possibility to get a USB Snoop trace using Snoopypro.exe
on windows (I can give you the procedure if you want, this is simple, or
you can look at some other messages in the Sane-devel mailing list
16 matches
Mail list logo