http://www.sdac.org/info/events.htm
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
John:
As of two years ago when Ray Duque and I interviewed Bob Marsh at the
Shelby works in Vegas during the SEMA show (November 4, 2004) the
original artwork to "print" the dash plaques (autopositives?) was still
on file at Shelby. It would seem that a request to Carroll along with
proof of ow
Chris:
WHAT!!! You can't abandon ship like that!!
What happened to the TII conversion?
What happened to the interior? I thought you had converted from
burgundy to gray.
Are you involved in a new project?
Dennis L. Cote
PS got pictures? How much are you looking for?
From: [EMAIL PROTECTED]
Sub
Anyone know if there is a way to add an auxiliary input to the factory
CD player in my 2004 PT?
I would like this to be able to play the voice directions from my GPS
through the stereo and also the 10 gigs of MP3's on the GPS hard drive
thought the stereo.
Dennis L. Cote
--
John:
I have three SL wheels and two center caps (but no medallions).
These are the 15x6.5 wheels. Let me know if you are interested.
Dennis L. Cote
Date: Fri, 02 Feb 2007 19:01:22 +
From: "John Kuznicki" <[EMAIL PROTECTED]>
Subject: SD> 1987 Shelby Lancer Parts
I just bought SL #92, funny st
Dave:
Do the following with the heater full ON.
The gentle method. (do this first)
Cooling system flush.
First, drain the cooling system, drain from the engine block, and the
radiator, if you don't mind laying down on the ground.
Then mix HOT water in a 5 gallon bucket with 1/3-1/2 box,(sma
Jeff:
Take a look at the Fiero mesh wheels.
They are 5 on 100 mm bolt pattern so this will require the 5 bolt
conversion.
They bolt up to the minivan hubs fine with a bit of grinding on the
calipers.
This gets you a 7 inch wheel in a 15 inch diameter and several upgrade
paths for brakes.
225/5
Shawn:
I have had good luck restoring plastic bits with JB weld.
It may take a few applications to build up larger bits, but when cured
it seems to hold up well.
The texture may be an issue in some cases, but I have been able to
convert to a wrinkle finish with good results.
Jeff:
By your sign
1989 with batch fired injectors and 1990 with sequential injection.
Date: Tue, 8 Aug 2006 23:49:44 EDT
From: [EMAIL PROTECTED]
Subject: SD> Dodge Caravan
have a question, which year did the Dodge Caravan come out with the
Turbo..thanks
---REMOVE-FOOTER-WHEN-REPLYING--
