Ivan says the following, which is what I was going to say if he didn't:
> However, I am the first to say that it is practically impossible to
> make a CS that is not effective, no matter how simple the generator...
> I am not one who believes that particle size is of great importance,
> 1nm or 50n
ringe filters, there is no
cheap particle sizing.
Regards
Ivan.
-Original Message-
From: Marshall Jeffus [mailto:marshalljef...@yahoo.com]
Sent: Wednesday, 30 January 2002 7:12 a.m.
To: *Silver-List* (E-mail)
Subject: RE: CS>Bubbler System for CS and Commentary
Please consider the f
arland [mailto:goldenok...@hotmail.com]
> Sent: Tuesday, January 29, 2002 11:46 AM
> To: silver-list@eskimo.com
> Subject: Re: CS>Bubbler System for CS and Commentary
>
>
> OOPS!! I have no shutoff valve. I have a simple pump, check
> valve and hose.
> I missed the valve
took to make it!
Regards
Ivan.
> -Original Message-
> From: Tel Tofflemire [mailto:telt...@home.com]
> Sent: Tuesday, 29 January 2002 4:47 p.m.
> To: silver-list@eskimo.com
> Subject: Re: CS>Bubbler System for CS and Commentary
>
>
> Brooks I have been using the fish ta
ke it!
Regards
Ivan.
> -Original Message-
> From: Tel Tofflemire [mailto:telt...@home.com]
> Sent: Tuesday, 29 January 2002 4:47 p.m.
> To: silver-list@eskimo.com
> Subject: Re: CS>Bubbler System for CS and Commentary
>
>
> Brooks I have been using the fish
and for your
> recommendations
>
> Connie
>
> > From: Brooks Bradley
> > Organization: HARBORNE RESEARCH FOUNDATION
> > Reply-To: silver-list@eskimo.com
> > Date: Mon, 28 Jan 2002 12:12:24 -0600
> > To: Silver-list@eskimo.com
> > Subject: CS>B
OOPS!! I have no shutoff valve. I have a simple pump, check valve and hose.
I missed the valve in your setup.
From: Brooks Bradley
Reply-To: silver-list@eskimo.com
To: silver-list@eskimo.com
Subject: Re: CS>Bubbler System for CS and Commentary
Date: Mon, 28 Jan 2002 18:50:57 -0
Dear Mr. Garland,
I am somewhat puzzled by your comment relating to being unable
to control the bubbling intensity..especially so since the ratio control
offered by the shut-off valve in the gang assembly allows one to regulate air
output down to zero.
Thank you so much Brooks for doing that testing, and for your
recommendations
Connie
> From: Brooks Bradley
> Organization: HARBORNE RESEARCH FOUNDATION
> Reply-To: silver-list@eskimo.com
> Date: Mon, 28 Jan 2002 12:12:24 -0600
> To: Silver-list@eskimo.com
> Subject: CS&
I used the same setup, but had to discontinue the stone because it bubbled
violently enough to severely wet the bottom of the wood holding the
electrodes. I feared it would "short" across the electrodes. I tried all
different water levels to no avail. I just stick the end of the tube in the
bot
I do not intend to initiate or exacerbate
excessive dialog.nor to become embroiled in adversarial contentions
favoring bubbling over stirringas being more advantageous in
supporting CS generation. We have found both methods to be quite
successful. However, I do bel
11 matches
Mail list logo