Thanks George..But I tried already thatAnyway now checking the RPM
installation.Once its finished I will let you know the update..
Kumaran T
On 10/3/2011 1:06 PM, George Niculae wrote:
On Mon, Oct 3, 2011 at 8:29 AM, Kumaran T
thiru.venkateshwa...@ezuce.com wrote:
Hi George,
Now I
On Mon, Oct 3, 2011 at 10:40 AM, Venkateshwaran T
thiru.venkateshwa...@ttplservices.com wrote:
Thanks George..But I tried already thatAnyway now checking the RPM
installation.Once its finished I will let you know the update..
Please also perform some regression tests on CDRs in 4.6
Thanks
I think we already had that discussion and abandoned the idea months
ago because that meant, among other things, 100% of calls would have
to be answered by the IVR, and it would breakk all kinds of call
forwarding, for example.
On Sun, Oct 2, 2011 at 9:28 PM, Joegen Baclor jbac...@ezuce.com
On Mon, Oct 3, 2011 at 12:27 AM, Ewan McLean
ewan.mcl...@servistech.co.ukwrote:
Hi Gerald, Tony
It's a Huawei router but the firmware is pretty relaxed. I've switched it
to bridged mode and set up the sipx box as a little router. Set up
masquerading through IP tables so I can now route my
On Sun, Oct 2, 2011 at 1:38 PM, Becker, Jesse beck...@sunyulster.eduwrote:
All,
I recently purchased two Polycom IP Backlit Expansion Modules for testing.
I have installed on two Polycom IP 650s. However, when configuring speed
dials, it appears that the last button on the BEM never
FWIW: I can populate all buttons, no problemo.
BTW: I need 19 speeddials to fill a 650+BEM, 5 for the 650 buttons and 14
for the BEM.
Paul
Douglas Hubler dhub...@ezuce.com wrote on 03-10-2011 16:03:35:
On Sun, Oct 2, 2011 at 1:38 PM, Becker, Jesse beck...@sunyulster.edu
wrote:
All,
I
is it possible you have a sidecar with a bad display in the last position?
On Mon, Oct 3, 2011 at 10:19 AM, pscheep...@epo.org wrote:
FWIW: I can populate all buttons, no problemo.
BTW: I need 19 speeddials to fill a 650+BEM, 5 for the 650 buttons and 14
for the BEM.
Paul
Douglas Hubler
It appears that the last speed dial (sd) to get written in both
MAC-directory.xml file is position 18. After that, the regular address
book data is pushed.
When I look at the user speed dial configuration under the user, the entry
is present but not pushed to the file.
O phone A I have:
1 line
8
Since enabling T.38 on our Fax DIDs, it appears that faxing through our legacy
analog fax machines through a Cisco ATA /186 has become less reliable than
previously. Before the DIDs dedicated to the legacy fax machines worked just
fine sending the faxes through the ATA when the DIDs were not
I never once indicated you should put sipx directly to the modem. I
indicated very precisely what kind of functionality your should have ina
firewall, sipx is not a firewall.
modem in bridged mode - firewall capable of doing nat and symmetrical
(full cone nat), which you can competently
Hi folksThanks
for the responses. I gave a go at taking my router out of the equation.
Setting it into bridged mode basically turned it into a modem. I then
configured the linux server as a gateway/router, masquerading NAT out
and static NAT in on port 5060. It now seems to be doing outbound
Sure George.I will do regression tests on CDRs in 4.6.I can access the
config UI and all the services are running after the RPM installation.So
no problem in 12th Sep RPM.I think its yum update problem in our side..
Regards,
Kumaran T
On 10/3/2011 3:06 PM, George Niculae wrote:
On Mon, Oct
12 matches
Mail list logo
