> The update to 4.4 is pretty painless just make sure you send the
>> > server its profiles and everything seems operational before backing up
>> > to move forward if you take this route.
>> >
>> > On Tue, Nov 27, 2012 at 8:01 AM, Douglas Hubler
>> wrote:
&
Hello,
I need to upgrade my SipXecs to 4.6. I have all data for the configuration
in one backup file. I think about doing the next:
1) Install Sipxecs 4.4 and restore the backup from 4.2.1.
2) Make a new backup in Sipxecs 4.4
3) Install Sipxecs 4.6 and restore the backup from 4.4.
It´s possible
Hello,
I want to try some Yealink Telephones in SipX 4.4. I have downloaded the
Plugin in https://github.com/siplabs/sipXyealink and I have it in my CentOS
system. The problem is that I don`t know exactly how can I install this. I
need to install this plugin, because I want to add these telephones
Will https://github.com/siplabs/sipxyealink be added to the sipx repository
(http://github.com/dhubler/sipxecs) and will it be updated to be compatible
to sipx 4.6?
2012/9/11 Daniel Peinado Lopez
> Hello,
>
> I'm trying to test Yealink telephon in Sipxecs 4.6, but it isn'
Hello,
I'm trying to test Yealink telephon in Sipxecs 4.6, but it isn't in the
list for adding. I have read that github.com is working in this project. Is
it possible to test this telephon with other telephone configuration of the
existing list? Do you know when will be ready the github.com projec
Hello,
I'm trying to call from my computer to one Snom320. Everything is in the
same network. I have some snoms registered and It works good. When I call
from one snom to X-Lite 4 always start the voicemail. When I call from
Xlite-4 to one snom it shows "calling" but nothing happens.
I have confi
Hello,
after trying different things, I had one idea. I scanned the IP Addresses
of my network, and it follows that I choosed 192.168.1.10 for AudioCodes
server, but after SipXecs installation it changes by itself to other IP
address (192.168.1.254) . So, now it's possible to open both interfaces
>
> Hello,
>
I have looked the ARP cache, and after doing ping from my PC to my IP
address of AudioCodes Interface (192.168.1.10) I can see that HWaddress is
incomplete. I add manually the MAC address but still not working. However
the SipXecs server works good (192.168.1.50). I explain you the sc
Hello,
I have checked with "arp -a" and the IP: 192.168.1.10 isn't in the table.
But it was before I configure SipXecs. Now after SipXecs configuration I
can only ping to 192.168.1.50, which is SipXecs server.
I try to add the IP and MAC address manually to arp cache but I can't. I'm
using Window
Hello,
maybe the problem is that SipXecs is installed in a module inside the
AudioCodes M 1000 and I need to define 2 Gateways, one for the AudioCodes
and other one for the SipXecs. When I launch SipXecs service, I can't ping
the AudioCodes IP Address (x.x.x.10).
Thank you
*
Hello,
Yes, I try to Open in two webbrowsers both interfaces.
Thank you very much for your answer
* *
Daniel Peinado López
*IANT - APPLIED NGN-TECHNOLOGIES
**Turn-Key VoIP/UC Solutions and More...
*Fon: +49 (5331) 6794 400
Fax: +49 (5331) 6794
Hello,
I'm configuring Audiocodes Mediant 1000-MSBG (Firmware 6.00AL.018.003) with
SipXecs - 4.4.0 - centos.
First I have installed the CentOS in the Audiocodes Hard Drive and next
Sipxecs (but I didn't configure yet).
I want to make a local scenary without WAN, and these are the details:
I conn
12 matches
Mail list logo