Hi,
I just installed the Latest Stable release of sipXecs 4.0.1 and I was wondering
if the Siemens Openstage 40 SIP Phones are supported.
I am setting up these phones to do testing in our lab just to make sure the
phones can register and make calls. Plus to verify the phones get the right
polic
Hi,
I while back someone mentioned about a book that could be downloaded about
SIPX. Does someone have the information
on where to get this book. I believe it was written by some of the Nortel
Developers.
Thanks
Scott
___
sipx-users mailing list sipx-
Works fine for me too.
From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of
alande...@slingshot.co.nz
Sent: Tuesday, April 28, 2009 10:02 AM
To: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] What happens to sipxecs repository and do
make
calls.
So I was wondering if DHCP Option 120 would help? The only problem I don't see
this option on my Windows 2003 server R2. How would I configure this if this
is needed?
Thanks
Scott
From: Gilmour, Scott
Sent: Thursday, March 19, 2009 9:28 PM
To: 'sipx-users@list.sipfoundry.or
Hi,
I have sipx version 3.11. On a daily bases I need to reset the sipx server in
order for my phones to come up so I can make a call..
I reset the server and the Siemens optipoint 410 phones come up and go right
from saying they are registering to
coming up so I can make a call. I am not sure
Hi,
I have two Cisco 7970G Phones with SipXecs 3.11.9. Does anybody know how to
add the SipXecs server information to the phones? I figure I could enter the
sipxecs server ip where it says call manager but it won't give me an option to
enter anything.
Any suggestions or help is appreciated.
Th
So I ran the
Configuration Diagnostics Test and it said NTP Test Unknown.
So it appears it is not recognizing my NTP configuration.
-Original Message-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Thursday, February 12, 2009 9:44 AM
To: Gilmour, Scott
Cc: sipx-
lawre...@nortel.com]
Sent: Thursday, February 12, 2009 9:44 AM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] NTP Server
On Thu, 2009-02-12 at 09:19 -0500, Gilmour, Scott wrote:
> Hi,
>
> I was wondering if there is any info on the NTP Server setup. I se
-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Monday, February 09, 2009 4:50 PM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] 3.10.1 to 3.11.9
On Mon, 2009-02-09 at 16:09 -0500, Gilmour, Scott wrote:
> Hi,
>
> I reloaded 3.10.1 and wa
Hi,
I was wondering if there is any info on the NTP Server setup. I set up the NTP
server on my Windows 2003 Server which I use on my other products. When I
setup my NTP address
On the SipXecs server I am not getting the correct date to show up on my Server
and also my phones.
Any suggestions
Hi,
I have two Siemens Optipoint 410 Advance phones configured with Lines.
I send all profiles then check the job status and I am seeing this error. What
does this error mean?
Thanks
Scott
Job
Start
Time
Stop
Time
Status
Error /
Warning
Projection for: 0001e3222fde
2/11/09 9:37 PM
2/11
Hi,
If I add a User, Phone and a line should the phones show up in registration
automatically or do I need to do something else.
Thanks
Scott
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx
Hi,
I reloaded 3.10.1 and was able to get my Siemens Optipoint 410 advance phones
to work with the Polycomm Soundpoint IP 600/601 v2.0 Phone configuration.
Then I said lets upgrade to 3.11.9 and do the exact same configuration. After
upgrading to 3.11.9 when I make a call from extension 300 to e
Michael,
I will give that a try. Downloading the ISO now.
Thanks
Scott
From: Picher, Michael [mailto:mpic...@cmctechgroup.com]
Sent: Saturday, February 07, 2009 4:31 AM
To: Gilmour, Scott; sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] (no subject)
I don't know as the up
Hi,
Since I am not having any luck I was going to upgrade to the latest unstable
build. When I say Y to download I am getting this Transaction Check error:
What should I do?
I am upgrading from 3.10.3 Stable release to the latest unstable release.
transaction check error: file etc/sipxpbx/sipxc
Do you think I should just upgrade to the 3.11 version? I am not having any
luck with the Domain suggestion.
-Original Message-
From: Dale Worley [mailto:dwor...@nortel.com]
Sent: Friday, February 06, 2009 2:06 PM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: RE: [sipx
]
Sent: Friday, February 06, 2009 2:06 PM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] After upgrading from 3.10.3 Unable to make calls
On Fri, 2009-02-06 at 11:31 -0500, Gilmour, Scott wrote:
> Here is the snapshot.
OK, that was my mistake -- I didn't see
Steve,
I tried your suggestions and changing from IP to Domain did not work. I am
still open to other suggestions.
Thanks
Scott
-Original Message-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Friday, February 06, 2009 9:52 AM
To: Gilmour, Scott
Cc: sipx-users
: Thursday, February 05, 2009 11:28 AM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] After upgrading from 3.10.3 Unable to make calls
On Thu, 2009-02-05 at 09:18 -0500, Gilmour, Scott wrote:
> All,
>
> I upgraded to 3.10.3 the other day and now I am unable to m
Hi,
I am still having no luck so is there a way to backrev to the previous firmware
I had installed?
Thanks
Scott
From: Gilmour, Scott
Sent: Thursday, February 05, 2009 9:19 AM
To: sipx-users@list.sipfoundry.org
Subject: After upgrading from 3.10.3 Unable to make calls
All,
I upgraded to 3.10.3
All,
I upgraded to 3.10.3 the other day and now I am unable to make calls with my
Siemens Optipoint 410 advance phones.
I even started from Factory Defaults and reconfigured my phones and the sipXecs
Server and it still fails.
When I go to make a call I get a message on my phone cleared unknown a
I am running sipxecs 3.10.3. After upgrading to 3.10.3 I am having trouble
making calls. I dial the phone number and I get a message on my phone Cleared
-unknown and then it
makes a sound like a busy signal. Has anybody else seen this? I am currently
checking my configuration to see if somet
In my test environment I am having issues where my optipoint 410 advance phones
are doing DHCP.
If I move the phones to a different subnet it is keeping it old DHCP address.
So I am wondering if there is a way to do a release/renew of the ip address so
it will get a new ip address. This seems
I am using 3.10.3 Firmware
From: Gilmour, Scott
Sent: Wednesday, February 04, 2009 3:04 PM
To: sipx-users@list.sipfoundry.org
Subject: CISCO IP Phones
Hi ,
I was able to get the sipXecs to work with the Siemens Optipoint 410 advance
phones.
Now I also have a couple of Cisco IP Phones 7970
Hi ,
I was able to get the sipXecs to work with the Siemens Optipoint 410 advance
phones.
Now I also have a couple of Cisco IP Phones 7970 Series. Does anybody know if
these devices can be added
To the sipXecs server and how I would add it to the server.
Thanks
Scott
Ps. I tried the Cisco IP 7
That took care of it.
Thanks for everyones help.
Scott
From: Tony Graziano [mailto:tgrazi...@myitdepartment.net]
Sent: Tuesday, February 03, 2009 2:54 PM
To: Gilmour, Scott; sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] (no subject)
Yes. the wiki has the answers, and these are just
Does anybody know how to fix this warning?
Thanks
Scott
Warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID fea2409e
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Uns
.rpm:
[Errno 12] Timeout: mailto:scott.lawre...@nortel.com]
Sent: Tuesday, February 03, 2009 10:50 AM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: RE: [sipx-users] Download
On Tue, 2009-02-03 at 08:56 -0500, Gilmour, Scott wrote:
> Scott,
> 1. I am doing the yum update
: Monday, February 02, 2009 3:51 PM
To: Gilmour, Scott
Subject: RE: [sipx-users] Download
On Mon, 2009-02-02 at 15:37 -0500, Gilmour, Scott wrote:
> So do I still use wget or do I need to do it another way?
> Here is the script:
>
> I am assuming in the yum.conf I would just ente
Hi,
I am using Centos with my sipXecs Server.
Is there a way to setup remote desktop with my sipXecs Server.
Thanks
Scott
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: h
It is updating it didn't like the space between lines in the yum.conf file
Thanks for all your help
Scott
-Original Message-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Monday, February 02, 2009 3:51 PM
To: Gilmour, Scott
Subject: RE: [sipx-users] Download
On Mon,
age-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Monday, February 02, 2009 3:51 PM
To: Gilmour, Scott
Subject: RE: [sipx-users] Download
On Mon, 2009-02-02 at 15:37 -0500, Gilmour, Scott wrote:
> So do I still use wget or do I need to do it another way?
> Here is the script
Use automatic configuration
script and enter address http://proxy.domain.com/proxy.pac
-Original Message-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Monday, February 02, 2009 2:08 PM
To: Gilmour, Scott
Cc: sipx-users@list.sipfoundry.org
Subject: Re: [sipx-users] Download
Try
Hi,
How long before 10.3 gets put onto the website as an ISO file. The reason I
ask is because I am having issues updating from 10.1 to 10.3 and 10.2-10.3 on
my two machines.
proxy=http:// http://proxy.domain.com/domain.pac:80
wget -P /etc/yum.repos.d
http://sipxecs.sipfoundry.org/pub/sipXec
Scott,
The only other message I see with -v switch is proxy request sent awaiting
response 403 forbidden
-Original Message-
From: sipx-users-boun...@list.sipfoundry.org
[mailto:sipx-users-boun...@list.sipfoundry.org] On Behalf Of Scott Lawrence
Sent: Monday, February 02, 2009 10:38 AM
To
Scott,
-v switch didn't give me any more information
-Original Message-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Monday, February 02, 2009 10:33 AM
To: Gilmour, Scott
Subject: RE: [sipx-users] Download
[keep discussion on the list so that others can benefit, p
Hi,
I am installing SIPX on a second machine and I screwed up the setup. How can I
restart the setup so it will go through all the setup steps.
Thanks again,
Scott
-Original Message-
From: Dale Worley [mailto:dwor...@nortel.com]
Sent: Friday, January 30, 2009 2:44 PM
To: Gilmour, Scott
Hi,
I was going to rebuild my sipx server. How stable is the 3.11.9 ISO Build or
should I just load the 3.10.2 ISO Build.
Any suggestions is appreciated.
Thanks
Scott
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.s
Ok Thanks but I have to disagree. Since everything is fine until I see this
message.
-Original Message-
From: Scott Lawrence [mailto:scott.lawre...@nortel.com]
Sent: Tuesday, January 27, 2009 2:48 PM
To: Gilmour, Scott
Cc: Dale Worley; sipX-users
Subject: Re: [sipx-users] INIT: version
e.
Thanks
Scott
-Original Message-
From: Dale Worley [mailto:dwor...@nortel.com]
Sent: Tuesday, January 27, 2009 2:01 PM
To: Gilmour, Scott; sipX-users
Subject: Re: [sipx-users] INIT: version 2.86 reloading
On Tue, 2009-01-27 at 10:53 -0500, Gilmour, Scott wrote:
> I keep on seeing my phones
Hi,
I keep on seeing my phones go to registering. Then when I go to my server I
see this message:
INIT: version 2.86 reloading
After that I need to reboot my SipXecs server in order to my phones to register.
Has anybody seen this message before?
Thanks
Scott
__
HI am using the sipXecs Server with the Siemens Optipoint 410 advance phones.
I was able to make it so it would display the Name and the extension. But I
was wondering if there is an easy way to make it so I can see the actual ip
address?
I can see the IP address when I bootup or by going into t
Hi,
Is there an easy way to change the ip address of your SIPX Server and to add a
second interface to the sipx-server?
Thanks
Scott
___
sipx-users mailing list
sipx-users@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-users
Un
Hi,
I was able to get my Siemens Optipoint 410 advance phones with the SipXecs to
work with my setup.
Plus I was able to get it to work with MAC Authentication. Does anybody know
how to get these phones to work with 802.1X authentication?
Thanks
Scott
Netboot 410 V1.5
Optipoint 410 adva
Hi All,
I was able to get sipXecs to work on a flat network and I am able to Register
my phones and make calls.
Now I want to add my phones to my routed network and be able to plug them into
any interface and have them register and get an ip address.
Any Suggestions would be appreciated.
I though
Hi,
I have two Siemens phones optiPoint 410 advance. I notice the phones are not
in the list and I use the Grandstream HandyTone 286 phones and then I enter the
mac address.
When I connect the phones they just say registering and never able to connect
them. What do I need to do to get this to
46 matches
Mail list logo
