Hi Steve, I am having ussues getting my sipViewer to display the information.
My Sip server is 20.1.180.75 My users are 2000 and 3000 2000 = 192.168.5.100 3000 = 192.168.5.100 Vlan = 444 Thanks Scott -----Original Message----- From: Scott Lawrence [mailto:scott.lawre...@nortel.com] Sent: Thursday, February 05, 2009 11:28 AM To: Gilmour, Scott Cc: sipx-users@list.sipfoundry.org Subject: Re: [sipx-users] After upgrading from 3.10.3 Unable to make calls On Thu, 2009-02-05 at 09:18 -0500, Gilmour, Scott wrote: > All, > > I upgraded to 3.10.3 the other day and now I am unable to make calls > with my Siemens Optipoint 410 advance phones. > > I even started from Factory Defaults and reconfigured my phones and > the sipXecs Server and it still fails. > > When I go to make a call I get a message on my phone cleared unknown > and then I get a sound that sounds like a busy signal. > > Any Ideas. This was working fine in 3.10.1 Firmware. To debug this, you'll need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably).
sipregistrar.log
Description: sipregistrar.log
sipXproxy.log
Description: sipXproxy.log
vxmlengine.log
Description: vxmlengine.log
_______________________________________________ sipx-users mailing list sipx-users@list.sipfoundry.org List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users