Hello everyone,
The new list at [EMAIL PROTECTED] is a backup list and
is intended to be used when this one is down.
The purpose is so that when this one is down, instead
of sending e-mails that don't show up as posted you
can send them to [EMAIL PROTECTED] and everyone will
get it until this on
Hitec service has been so good for me it has
led to me abusing them somewhat.
I once sent them the REMAINS of three 535 rx's
that I had destroyed combating/impacting
with slope-racer chock full O' lead.
They sent me two brand new ones free.
That's just one time- I have had other equally
good exper
Hello all!
Looking for the URL to a page where I might find the schematics
for making my own Locator /Buzzer. Trying to find a downed plane up here
in the mountains fern and undergrowth is getting to be a real headache.
Thanks,
Doug Blackburn, Running Springs Ca. aka.< CrashMastr> (909)
I'm I too later for this bird?
The Soaring Junkie
At 05:31 PM 8/19/99 -0700, Thomas L. Akers wrote:
>F3B Diamond (RnR produced wings) For Sale.
>
>Slightly Seasoned, but still just as fast as brand new.
>5 Airtronics 141 for the wings and rudder.
>Airtronics 161 for the elevator.
>
>Add a batte
Rumors have it that all the midwest HLG pilots east of Indiana are all
flying open class in Kentucky with Gordy this weekend and are going to miss
a Midwest Series HLG contest!
A first annual one at the SOAR sod farm club field at that! 8-)
Here is your chance to fly HLG on the finest field t
Incredible. I responded this question when it was posted in the Brazilian list today.
I recommended a Clark-Y with a 12% thickness, and similar lay-out. It is funny to see
that the translatio for "match" was "fósforo", which is a "match" intended to start a
fire... Besides that, it is perfectly
My first was a converted electric, called the Lucifer (ironic, considering
the line of work I'm in). In this configuration, I think it was called the
Prophet (better, for me). Hooked my first boomer with it after many
launches, flew for 45 minutes, and I was never the same again (just ask my
Your email is bounching.
I get back
<[EMAIL PROTECTED]>:
Sorry, no mailbox here by that name. (#5.1.1)
Bob If you see this, send new email address to me
Or if anyone out there has his right address, He changed it last week.
please send it to me.
Thanks
Howard Rudy
Could have been my web page at
http://www.vision.net.au/~timotsc/elecmod2.htm
At 04:47 AM 19/08/1999 -0700, Dan Borer wrote:
>Recently I saw somewhere a magazine article or website describing the
wiring scheme for all of the different brands of servos. Can anyone out
there help this old brain re
In a message dated 99-08-19 21:49:48 EDT, you write:
<< I agree that the SR7 was a cool sloper. But just because it wasnt
all molded, etc doesnt mean it was antiquated or primative, then or now. >>
And the F-21 Predator is an EPP version of the venerable SR-7...
Visit the web page at:
Thats the Manassas National Battlefield Park, site of the first and second
battles of Bull Run, not a site where modelers get together to discuss
modeling. My wife and I were scheduled to be visiting my daughter in
Herndon, VA on the second weekend in August. I posted a notice on the
Sailplane
Well I said I'd do it, and got a taker already - Thanks Ollie... Quick
turn-around and great info!
Hope there's not too many more... this could get tedious!
Here goes: (complements of bablefish.altavista.com) ((Still can't believe it
knew how to translate dihedral!))
Oliver Wilson wrote:
> Regar
I wanted to thank Rick for his kind words towards our area(Humboldt
County Calif.) and our club(Redwood Soaring Association). We were very
happy to have Rick and Mary visit us and do some flying.
Hope to see you around Thanksgiving when we are in your area.
Mike
RCSE-List facilities provided by
Hey all,
When I was learning how to fly (and 5 min epoxy back together) my
Wanderer at the local slope(Coyote Hills) what I really wanted to fly
was that cool lookin' Coyote or that scary lookin' Cheetah. Man those
planes looked fast just staring at me from the magazine pages!
Eventually I suc
Hey--RCSE doesnt cost me anything and, I for one enjoy the heck out of it.
No change for me. Jim LarkinAt 04:09 PM 8/19/99 EDT, [EMAIL PROTECTED]
wrote:
>Well, have used onelist on and off for almost two years now and I have never
>had any problems with them. Also I don't think I have gotten
I destroyed a couple of gliders in the 80's trying to learn by
myself, no club or instructor. They were balsa kits, something
like the Gentle Lady. Knew nothing of CG, incidence, or
washout. Even turned a foam Spirit of 76 into 10 pounds of
5 minute epoxy.
Attempted again in the 90's with a H
Yes, there is. There is an undocumented master, slave function found in the
programmable mixes. The function is FPRN. it is found in some of the mixes
as a master and some as a slave. The offset can also be set.
However from your description of what your trying to accomplish, I dont have
Can anyone suggest where to send my Ace DMVC charger to be repaired?
Cap"n Eddie I miss ye.[EMAIL PROTECTED]
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
No endorsement, just the facts: OmniModels at www.omnimodels.com has the 110D for
$104.95 w/ no shipping on orders over $100.00. I
purchased two units some weeks ago. The deal went down no problems.
Stan Myers wrote:
> Looking for a good source for Sanyo's that are competitively priced?
>
> Als
Ray Hayes call or fax..1-(810) 781-7018
Sky Bench Aerotech email. [EMAIL PROTECTED]
P.O. Box 316 website.. http://www.skybench.com
Washington, Michigan 48094Model Aviation Headquarters
Stan
Servo wiring diagrams are on the ol' Fatlion web page.
Here's the URL:
http://www.fatlion.com/sailplanes/servos.html
Bill Swingle
[EMAIL PROTECTED]
Pleasanton, CA
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
Determine where you want your servos first.
Then put some masking tape over the spot, larger than the servo cut out.
I use a plain old #11 Xacto blade. Cuts fine.
Then I take a small block of either balsa or EPP and glue it to the wing in
the servo "well" using epoxy.
Then I take my Dremel wit
Many people, myself included, have long been baffled by the definitions and
classifications of the various types of events (F3B race verse F3J, etc...).
Here is the answer to those mysteries and many more, straight from the
FIA.org website:
http://www.fai.org/sporting_code/scg_c2.html#2.2.1.10
1
Looking for a good source for Sanyo's that are competitively priced?
Also looking for a good site for Astro 110D charger or equivalent
TIA
Stan
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
Here's a good reference site:
http://www.fatlion.com/sailplanes/servos.html
-- Keith
> Recently I saw somewhere a magazine article or website describing the
> wiring scheme for all of the different brands of servos. Can anyone out
> there help this old brain remember where I saw that info? I
I would love to add any picture to my Micro HLG site. Check it out:
http://www.scrollsander.com/Soaring-MHLG.htm
Anybody have any to add?
Chris Adams
-Original Message-
From: sakazaki, osamu <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, August 18
Wade,
As long as she knows BEFORE you tie the knot, you have nothing to worry
about. She has every opportoniity to dump you before it's too late... hehe
Actually my wife is very tolerant and supportive of "our" hobby. She and
our 1yo son come to the field regularly to watch me fly HL. We figured
Soaring buddies in the midwest should be coming to Lexington, Kentucky for
the next Ohio Valley Soaring Series event at the Bluegrass Soaring Society's
Mid-American Championships. Buzz and company are putting on another great
event with Unlimited and Standard class soaring and also play HL Golf o
JR 347 computer radio. Just had JR replace the memory battery and go
through the whole system. Unit looks brand new, no scratches or dents.
$140 delivered to you door.
Ed
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
For all the molded crowd, got my new Emerald from Skip and am going to have
to open up the wing to get servos in there, what is the best method to do
this? First shot at this and really want to do it right... Any help can be
sent to me direct.
TIA
Marc Gellart, Lima, OH
RCSE-List facilities pr
30 matches
Mail list logo