I can sell you a piece, but you will end up paying about $16 plus shipping.
Call your local machine shop and ask for HSS drill rod blanks. They are
precise and very hard, but not brittle. You can have them cut them to
length, or you can buy some here:
http://www.drillblanks.com/inch_sizes.html
This might be a better place closer to you:
http://www.huffsteel.com/Huff/Welcome.asp
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format
Guys:
Lead shot is easily available in several sizes at full service gun shops.
Another way to use it is to fill the nose with just a smig more than the
amount of shot you need. Turn ship nose down and fix it to stay that way. Fill
nose with required amount of lead shot. Use either thick AC or a
I saw a post earlier for someone needing a Compulsion joiner, and I've
recently 'freed one up'
The plane is shot, but the joiner looks fine - if you are still interested,
let me know.
Brent.
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to
The most dangerous words in aviation/ Hey guys, watch this
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages
must be sent in text only format with MIME turned off.
Hey, anyone have a piece of really hard straight 5/16 steel rod they can
sell me? It needs to be at least 11 inches long for my new Duck.(old Duck
kit) Maybe it's a Disco Duck! ( an 80's term)
You can get 5/16 ejector pin for Dixie, and cut the head of with a
rotary tool.
Andrew E. Mileski wrote:
Ejector pins come in lengths from 4 to 14, though 36 can be had from
some sources. Make sure to keep in mind the loss in length from cutting
the head off. They have a hardened core and an even harder nitrided
surface that resists wear and corrosion. You'll
Hi Rense,
You said:
I'm looking for a rank beginner's 2M plane for an acquaintance. Has anyone
any experience with the Defiant as advertised by NSP? Any other (low
building) suggestions?
For many years, I have been a strong proponent of the EPP polyhedral
Highlander as a beginner's plane.
Anyone know the best way to take out an S turn warp on the trailing edge
of a 99 wing. The trailing edge is balsa attached to the wing ribs. I
know I can cut it out, but there must be an easier way
Kirk from Modesto
RCSE-List facilities provided by Model Airplane News. Send subscribe and
Soak the warp in ammmonia (Windex) and holding the correct shape until it is
completely dry.
Anker
-Original Message-
From: juster1 [mailto:[EMAIL PROTECTED]
Sent: Monday, November 17, 2003 11:05 AM
To: [EMAIL PROTECTED]
Subject: [RCSE] Balsa Trailing Edge
Anyone know the best way to
10 matches
Mail list logo