I've discovered the rx crystal is for the 9 channel rx. I have a 7 channel
IPD rx, channels 30 and 34 receiver crystals for the 9 channel rx's and a
channel 34 tx crystal. I'll take $80 shipped for everything. g
RCSE-List facilities provided by Model Airplane News. Send subscribe and
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
Harbor Freight has the 10x10 EZ Up Instant Dome 2 Canopy on sale for $80.
item # is 91060-2cyh. I've seen them selling for $100 more! Also, they
have a 27-piece hobby knife set on sale for $10. The handles and razor
plane are worth that much. Item # is 46946-0cya. One other item of
interest
Jim, real men fly/practice from short mega bungees, then you really have to work for
your times! Except for some winch practice now and then I never fly off of anything
else. Has it improved my flying- not ONE BIT! Seriously though, sounds like you guys
were having a blast. Many moons ago
What, no skeg?;-)
You might consider a less rigid, flexible bonding system, something like the
PFM from the hobby-lobby catalog or the silicone-like flexible glue Bob
Violett sells, I think it's a cousin to room-temperature vulcanizing stuff... I
think what's happening is your fuselage is
I've got AVA-Gear stickers available for $6 each + shipping. I can cut them
in your choice colors. gv
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text
The correct sticker text is AVA-Gea, not gear. gv
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and
unsubscribe messages must be sent in text only format with MIME turned off.
BVM Jets sells relabeled Hysol 9462. This is a formula designed to cure
quickly in an autoclave. At room temperature it needs 72 hours to reach
full strength.
A better alternative for our use is Hysol E-20NS available from McMaster
(6430A29). It is thixotropic, has a 20 minute working time
Endless Mountain Models
http://www.scalesoaring.com
email: [EMAIL PROTECTED]
don't make this more difficult than it has to be.
Some ill advice out there it seems.
You need to roughen up the area to be bonded inside the fuse. You do
not need to sand so much you chew through the fibers.
Gentlemen.
I'm taking orders for christmas Delivery of Photon II's and I decided to
take a little poll. How many of you HL DLG fliers out there prefer a
Peg and how many prefer a Blade. Please respond to my E-mail
Thanks
Jerry Krainock
RCSE-List facilities provided by Model Airplane News.
Here are the allelectronics.com part numbers:
#MJW-7 - 3.5mm jack switch for handlaunch sized loads.
#PMP or SMPM - 3.5mm plug
#SPHJ-1 or PHJ-S - 1/4 JS for higher loads
# SPH or MPHM - 1/4 plugs
There were more switches in case these are out of
stock. They are under connectors (jacks and
I believe these are quality switches, but be sure to
test the handlaunch-sized switches under load so that
you know they do not heat up like the Radioshack
switches.
For high-loads you can also use #DCJ-11 jack switch
with #DCLID 2.5mm co-ax plug.
Here are the allelectronics.com part numbers:
To do this kind of stuff, you are correct, your model has to be bullet
proof. Strong wing, strong stabs, strong and tight linkages with no
flutter on any surface.
Lately, I have been tearing some thermals up with this thermalooping!
I am feeling there is some sort of energy gain/release by
It looks like John and I can come down to Brookville Wed AM. What
channel are you going to be flying on.?
I would like to use Ch 15. Not sure about John. I can witness for you.
Mike Remus
On Sun, 12 Sep 2004 23:50:51 - campbelld9 [EMAIL PROTECTED]
writes:
The winds look good on tues and
see below
John Derstine wrote:
snip Secondly, there is
rarely enough mold release or contaminants inside the fuselage of a
molded fuse to degrade the joint, if in doubt clean with a de-greaser
(prep sol or similar) or lacquer thinner before sanding.
Well, on epoxy fuselages, the mold release can
Points well taken except for the reference to resins, there are only 4-5
epoxy formulators in the U.S. if that many.
All the epoxy brands mentioned can be used for glue, it depends more on
the quality of the specific formula and the thixotropic agent used to
make it suitable for bonding. It is
Greetings!
Does anyone have a complete Stratos SL wing they are willing to part
with?Any color will work, but I'm replacing a white and red one.
Where might I buy a new one, can anyone point me in that direction?
Thanks,
Bill Johns
--
Possibility is the secret heart of time.
17 matches
Mail list logo
