I have a spare Multiplex Profi 4000 with xtals for 18, 39, 44 and 51. It also
has a synthesized rf module done by Ernie P. Transmitter is in excellent
condition. Transmitter includes a case, neck strap, charging lead, spare
battery and the manuals for the P4000. Price is $850 including shipping
Near new Profi 4000 with both 72 (ch 19) and 35 (ch 74) mHz modules, second
3300 mah NiMH battery, two slider assemblies (that could be added for
camber changing or throttle for an electric) and factory case.
$700 postpaid CONUS
Jim Porter
6523 NW 95th Court
Johnston IA
USA 50131
tel: ++ 515
Near new Profi 400 for sale. $750 shipped CONUS.
thanks for the bandwidth - Rob Glover
I have a Profi that was recently checked over by
Ernie. Has 1800 MHA Multiplex battery which is hardly
used. Channel 24 crystal. Shift switch by Ernie. Has
original box with wall charger. No original manual but
I can supply a copy. No bumps or gouges in plastic
case. $600.00 plus shipping. Contact
I have a Profi 4000 with version 2 software in excellent
condition for sale. It has been tuned by Ernie Pritchard and includes:
the original NiCd pack and a
new 3000 mah NiMH pack
3 antennas (the original, a
Becker, and a rubber duck) that all work well
Several extra switc
For Sale
Multiplex Profi 4000 Like new
Just back from repair by Multiplex USA
New CPU Board, New Power board
V2.0 Firmware
Slider Added on left side of radio.1 Extra
stock type switch added on face of radio
3000 Mah battery and charge plug
72Mhz RF Module Ch 37 and Ch59 Xtals
Original
Thank you to all that responded, I received the feed back that I was hoping for plus
some unexpected replies. About half the people that responded offered to help me
figure out the radio, this was above and beyond the call as far as I am concerned.
Thanks for the offers of help, I am very fort
Used radios are very difficult to price. It's really up to you the seller to
pick whatever you live with. But, heck I'll take a shot at it.
My "personal thought" is that what you have, metal case and big battery, is
worth ~900$. But, I'd expect it to go for ~700$.
Best of luck to you. Looks like
Hello to you all, I have a profi 4000 and am thinking about selling but I have no idea as to what to ask for the radio. If you profi people could give me a starting point I would appreciate your input. I am in the USA the radio is in good shape a few scratches, new NiMetal hydride 3300 mh batte
I am thinking about selling my profi 4000 but don't know what to ask for it, what is a
fair price. It is in good condition no cracks, a
few scratches. It has software version 2.0, new battery pack 3300 mh Ni-metal
hydride, multiplex metal case, all the swithces and sliders work as they are sup
The Smiley rubber duck antenna, designed for the Stylus, is a perfect fit.
I've been using one on my 3030 for several months.
Bill Swingle
[EMAIL PROTECTED]
Janesville, CA
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]
I forgot to mention that My transmitter has had the fix with the plate and
the ground wire mounted behind the batteries.
>From: "Brad Brock" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: [RCSE] Profi 4000; rubber ducky antenna
>Date: Tue, 26 Feb 2002 11:56:3
At 11:56 AM -0600 2/26/02, Brad Brock wrote:
>I have found that when I use a baseload antenna on the Profi 4000, I
>get a lot of servo jitter when I am close to the plane and the
>jitter goes away when I change it back to the telescoping antenna
>that came with the transmitter.
>is there any
But apparently this was posted on the Multiplex e-list
(which I
do not subscribe to)
Anyway the gist of it was that the RF signal was
traveling down
the power leads from the battery... causing the battery
to
radiate RF back into the Profi keypads (the battery is
directly
behind th
I have found that when I use a baseload antenna on the Profi 4000, I get a
lot of servo jitter when I am close to the plane and the jitter goes away
when I change it back to the telescoping antenna that came with the
transmitter. Bob, at Smiley Antenna Company was telling me about a customer
At 03:38 PM 1/2/2002, Mike Stump wrote:
>it's to the point now where I evulse Honolulu Blue & silver (DL colors)..
>Black helmets are in.. Steelmen & Bears in the SB.. you heard it here..
DA Bears!
>the JR 649s (PCM 9-channel credit card) kicks but..
but... what? 8-) (it's the rx of choice
At 01:23 PM 1/1/2002 +, you wrote:
>Hey Stumper,how about those Steelers(you being a Lions fan and
>all,ooops,now everyone knows,come over to the promised land of the black
>helments!<<
it's to the point now where I evulse Honolulu Blue & silver (DL colors)..
Black helmets are in.. St
to
reverse). I think I am remembering the keys there!
Jason
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 09, 2001 10:48 PM
Subject: [RCSE] Profi 4000 programming.
I know this should be a simple thing to do, but I can't get the V-tail to
I received a Profi 4000 back because we could not get him a scanner :( The
user had 10 switches installed on this Profi 4000.
I can not sell her as new but she was never used either. Thus first $599.00
gets a Profi 4000 Tx only with battery RF deck charge and discharge jacks...
Call 800 375-131
://rcmodels.co.nz/clubs/asfcnz
> -Original Message-
> From: Tim Vandenheuvel [mailto:[EMAIL PROTECTED]]
> Sent: Monday, 2 April 2001 23:31
> To: [EMAIL PROTECTED]
> Subject: [RCSE] Profi 4000 for HLG's?
>
>
> Are any of you HLG guiders using a Profi 4000
With the Helios Vario I placed a Profi 4000 and a few items from the line
with low or no reserve bids on GMBID.com This way some one can get in to
Multiplex Equipment at a great price for the Holidays..
By the way Bidding is free as well :)
THANKS!
Smooth Thermals,
Karlton Spindle
MrMPX
http:
22 matches
Mail list logo