Title: RE: [RCSE] Blind Nut Stripped
I've had similar issues with blind nuts either stripping or not being set at the proper angle. Last case was my Sharon, where the front nut was only 1/2 visible through the wing hole when the center and rear were in.
I used a big soldering iron to
I had the same problem. It looks like the blind nut is aluminum and the
threads were slowly wearing away. Through further investigation the
supplied screw was only engaging about half the threads. So I took the
middle screw moved it to the front and purchased a 30mm to use in the
middle. Al
Heli-Coil it. I had a similar problem with a moldie a few years back
and this worked perfectly. Make sure to work slowly and carefully and
use cutting oil to minimize the possibility of breaking the blind nut loose.
Tom
Mark Williams wrote:
Help, the forward blind nut on my Eraser is stripped.
3 matches
Mail list logo