Have you created one (or the rig) lately? It's over 2 meters tall!
Or it's my install that's somehow buggered.;-)
Rob
\/-\/\/
On 2-4-2014 23:05, Sebastien Sterling wrote:
Wasn't the traditional idea to use the XSI man mesh as a scale reference ?
On 2 April
You could try using the Shapeways.com service to test some models. I've
done a little dabbling and the unit size is no more of an issue than any
other 3d software. You run your object through a free package called
Netfabb, it tells you the scale of the object, which was 1unit=1mm, then
output a
I'm over 2 meters tall !!
sorry not helpful!
On Thu, Apr 3, 2014 at 10:13 AM, Chris Marshall
chrismarshal...@gmail.comwrote:
You could try using the Shapeways.com service to test some models. I've
done a little dabbling and the unit size is no more of an issue than any
other 3d software.
I have done projects with softimage and makerbot 2x. Wasn't a problem...I
exported as obj , and the makerware software imports it perfectly 1 SI
unit = 1mm
On Thu, Apr 3, 2014 at 2:13 AM, Chris Marshall chrismarshal...@gmail.comwrote:
You could try using the Shapeways.com service to test
for some reasons the following post never appears in the thread when I
send it so here I try again:
A good friend of mine sometimes prints his creatures:
http://www.noisyknuckles.com/3dprints.php
He's an XSI fan and expert. You can write him on my behalf.
David
It does not start shipping till June
On Wed, Apr 2, 2014 at 2:13 PM, David Rivera activemotionpictu...@yahoo.com
wrote:
Hey everyone, thanks for your replies on the previous subject of Quadro
K4000.
Yesterday I was googling around for 3d printers. I really liked this one:
To reply to your topic title. I 3d printed some stuff and i used Softimage
but since sizes had to be very correct Softimage was quite a bitch.
2014-04-02 21:04 GMT+02:00 Stephen Davidson magic...@bellsouth.net:
It does not start shipping till June
On Wed, Apr 2, 2014 at 2:13 PM, David
I thought 1 SI unit = 1 cm.
On Wed, Apr 2, 2014 at 3:09 PM, Doeke Wartena clankil...@gmail.com wrote:
To reply to your topic title. I 3d printed some stuff and i used Softimage
but since sizes had to be very correct Softimage was quite a bitch.
2014-04-02 21:04 GMT+02:00 Stephen Davidson
sorry...I meant 1 si unit = 10cm
On Wed, Apr 2, 2014 at 4:24 PM, Stephen Davidson magic...@bellsouth.netwrote:
I thought 1 SI unit = 1 cm.
Best Regards,
* Stephen P. Davidson*
*(954) 552-7956*sdavid...@3danimationmagic.com
*Any sufficiently advanced technology is indistinguishable
I saw the Form 1 in depth at Siggraph last year.
For desktop printers under $5,000 USD, it's definitely the best quality
printer. It's the only stereo lithography printer available at that price and
can print with at least 4x better / finer resolution than the extrusion based
printers such as
10 matches
Mail list logo
