-- Original Message -
> From: "eric tanguy" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, May 16, 2004 8:35 PM
> Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
>
>
>>
>> >
>> > So modem_run start is OK
>> >
>
>
> So modem_run start is OK
>
>> May 16 19:09:38 localhost modem_run[11290]: Another program/driver is
>> already accessing the modem (interface 1 cannot be claimed)...
>>
> There is two drivers :
> - user mode with pppoa3
> - kernel modem with speedtch module now integrated in standard kernel
>
Ok i'm back with new tries.
I went to /var/log/messages and :
May 16 19:09:31 localhost modem_run[11290]: modem_run version 1.2 started
by root uid 0
May 16 19:09:31 localhost modem_run[11290]: Found SpeedTouch USB modem
May 16 19:09:31 localhost modem_run[11290]: Modem revision: 0400
May 16 19:0
>
> I don't know for you . I am not using hotplug nor startadsl
>
> Shelte Bron is right:
> -a is for 1.eni and -f is for 2.eni
> with -v 1, you should have seen if modem_run care about the mismatch.
When i ran modem_run with -v 1 i had on answer at all. Is it normal ?
>
>
>
> Try to add in you o
> You need the zzzlp(x) serie with Rev 4.00
> modem_run -v 1 -t 90 -n 4 -f /usr/share/speedtouch/firmware.ZZZLP1.eni
> -a /usr/share/speedtouch/boot.ZZZLP2.eni
> -v 1 display nice informations
> -n 4 is enough attempt to load firmware
> -t 90 avoid to wait to much if you ADSL is brocken, you reboo
> This may be a power issue on USB?
> Could you try without any other hungry other device pluged in you usb
> bus? (or in the other controller because you have one ehci-hcd and one
> usb-ohci)
Ok you are right!! It seems that only 2 over 6 usb ports are self powered
under linux (this is not the sa
> Yes it should. So what display
> cat /proc/bus/usb/devices | grep Rev
P: Vendor= ProdID= Rev= 2.04
P: Vendor=0e79 ProdID=1105 Rev= 0.00
P: Vendor= ProdID= Rev= 0.00
I have also a problem with my 2 usb2 HDs : sometimes only one (one or the
other) is detected and mountable. may
> uname -r
> will show your running kernel version
2.4.22-1.2115.nptl
>
> lsmod | grep usb
> will show what usb driver you use. If nothing is display, you need
> before
> to solve this issue.
usb-storage75136 1
scsi_mod 107080 4 [sg sd_mod usb-storage]
usb-ohci
> - Original Message -
> From: "eric tanguy" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, May 15, 2004 7:05 PM
> Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
>
>
>>
>> > What display cat /proc/bus
speedtouch 330
>
> eric tanguy wrote:
>
>>I just received my modem and it works fine with winXP. In fedora core 1
>> i have some problems : the leds are not lighting. I have a lot of usb
>> devices which are well regognised under fedora so i don't think to a
> What display cat /proc/bus/usb/devices | grep 06b9
Nothing
>
> If it is a speedtouch Rev= 4.00, you mandatory need to use the new V1.2
> driver and it is not bad for other model.
> Read what display modem_run usage (particullary for optional bootloader
> with is mandatory with Rev 4.00 and zzzlp
I just received my modem and it works fine with winXP. In fedora core 1 i
have some problems : the leds are not lighting. I have a lot of usb
devices which are well regognised under fedora so i don't think to a USB
problem but i'm not sure ...
My motherboard is an asus A7N8X-VM/400 with video/lan/
12 matches
Mail list logo
