> ----- Original Message -----
> From: "eric tanguy" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, May 15, 2004 7:05 PM
> Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
>
>
>>
>> > What display cat /proc/bus/usb/devices | grep 06b9
>> Nothing
>
> Is you usb working? enabled in the bios? ;-)
> I think usbcore and usb{ehci|uhci|ohci} is not loaded
Yes usb works fine i have a scanner and 2 HDs
>
> What kernel version do you have?
> V2.6.5 kernel had problem with many usb adsl modem but usb is not dead
> like yours.
I'm not sure but 2.4.? (the initial fedora core 1 kernel because i have no
internet access ...)
>
>> >
>> > If it is a speedtouch Rev= 4.00, you mandatory need to use the new
>> V1.2 driver and it is not bad for other model.
>> > Read what display modem_run usage (particullary for optional
>> bootloader with is mandatory with Rev 4.00 and zzzlp2.eni firmware)
>> I downloaded the targz file (1.2) from the sourceforge website and
>> installed it with the indications found in the french howto (12 Mai
>> 2004). I use alcaudsl.sys from my winxp renamed in mgmt.o and placed
>> in /usr/local/share/speedtouch/
> If you have windows V3 driver, the firmware is no more in alcaudsl.sys.
> Look for KQ6DP{1|2}.eni if Rev={0.00|2.00} or and both ZZZLP{1|2}.eni if
> it is a Rev4.00
Where can i find these files and how to know the version i have to use ?> >> With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no >> answer. My biggest problem (i think) is that the leds on the modem are >> OFF! Thanxes >> >> > >> > >> > Liste de diffusion modem ALCATEL SpeedTouch USB >> > Pour se désinscrire : >> > mailto:[EMAIL PROTECTED] >> > >> > >> >> >> >> >> Liste de diffusion modem ALCATEL SpeedTouch USB >> Pour se désinscrire : > mailto:[EMAIL PROTECTED] >> >> >> > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : > mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
