Hello, whenever i click on the "safely remove hardware" tray icon, and without
choosing any from the list, i get disconnected from the internet.
I googled it, and found another guy with the same problem:
http://www.velocityreviews.com/forums/t475395-safely-remove-hardware-anomaly.html
Any help?
Using 'The Linux Kernel Speedtouch Driver for SuSE', I get as far as
'Tidying Up', but when I copy and paste the commands into the shell, I get
the response:
'bash: -m400: command not found'.
With Kubuntu, using 'The Linux Kernel SpeedTouch Driver And Ubuntu' script,
I do everything as instru
Howdy,
I was following the steps through your how-to (
http://www.linux-usb.org/SpeedTouch/ubuntu/index-es.html - I´m a native
spanish-speaker), but I came to a close point where it seems nothing work.
I have Ubuntu 6.06 (2.6.15-23-286), and all the steps through the tutorial
went fine. I even ha
Duncan, I have been having problems with connections dying under 2.6.17, which
disappear when I revert to 2.6.16.20. I saw a message on linux.kernel that you
have received a couple of reports like this. You seem to think it's not
related directly to speedtch, given few changes were made betwe
hai there...
i have a problem with this usb alcatel speedtouch modem...
now i try suse 10.1
before i used 9.2 and the article of "hans hofer" which didn#t ever work on
my pc..
now i tried:
http://linux-usb.sourceforge.net/SpeedTouch/suse/index.html
and kinternet symbol is working for the fi
Hi,
my modem has always worked fine with any OS, and so it does now. I
decided to try out the udev firmware loading but... no effect. Here's
some output:
firmware_helper[3127]: main: error loading
'/lib/firmware/speedtch-1.bin.0.00' for device '/class/firmware/1-3:1.0'
with driver 'speedtch'
firm
Hi,
I have found that if I do
ping -s 6 www.demon.net
the ping fails, but what is worse, all future IP traffic ceases.
I have found that restarting pppd fixes this problem.
I have not been able to work out if this is a pppd problem or a
speedtch.ko module problem.
Can anybody help?
James
Li
Hi all!!,
I'm trying to connect my ADSL connection in FC4. I've followed all the steps
without having any problems, but when I try to reboot, the inicialization get
stopped. The last message that the inicialization application shows is
something like:
Use of NFS statd
to reboot the computer
Hi
I have a speedtouch 330 usb modem. I managed after some difficulties
to install and configure it in fedora core 4. Now I have it working
with a pppoe connection.
The problem is that I want to share my adsl conection with another
computer in a LAN.
Before having this adsl modem I had a 56 kb dia
Hi,
I tried to install the Linux Kernel SpeedTouch driver for Ubuntu Hoary
Hedgehog.
I've got a revision 2 modem (the purple one).
I followed the instructions from the document The Linux Kernel SpeedTouch
driver for Ubuntu Hoary Hedgehog, but I cannot get online.
First: I am a newby as far as
Take a look at this:
Starting ADSL connection...
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
sent [LCP ConfReq id=0x1 ]
sent [LCP ConfReq id=0x1 ]
sent [LCP ConfReq id=0x1 ]
sent [LCP ConfReq id=0x1 ]
sent [LCP ConfReq id=0x1 ]
sent [LCP ConfReq id=0x1 ]
sent [LCP ConfReq i
hi,
have been using the document 'speedtouch usb howto using benoit
papillault's GPL drivers'
and benoits drivers to use a speedtouch 330 usb modem to connect on an
adsl line, using suse 8, kernel version 2.4.20
The only difference was i used the rpm file with yast to install the
software, b
Hi,
I am having problems getting my SpeedTouch USB 330 (rev 4)
to run under Fedora Core 3 (kernel 2.6.9-1.681_FC3).
I have installed the speedtouch rpm package (ver. 1.3.1)
available from speedtouch.sf.net, and I am using the
ppp (ver. 2.4.2) and rp-pppoe (ver. 3.5) packages which
came with Fedora
I've been trying to run the speedtouch CVS driver on FreeBSD 5.2.1 without success.
First of all, the Makefile scripts are broken and won't compile cleanly, the problem
appears when 'sed' is executed. For example, the Makefile.in has:
-e 's,@bindir\@,$(bindir),g' \
its missing a \ before the fir
Hi, i hope someone can help me!
here is my setup:
Computer 1: Linux Redhat 9 (Athlon) with an Alcatel Speedtouch 330 ADSL
modem connecting as a static IP address to the internet using the GPL
Speedtouch USB driver
Computer 2: Windows XP Pro (Athlon) connecting to the internet over a simple
n
Hello, I have a problem in setting up the speedbundle, can you help me?
In order: I was able to connect with 2.4 kernel and the driver from benoit,
but they didn't work with 2.6 so I decided to try the kernel driver as suggested
on a forum.
So I re
oved the speedtouch driver and ppp and typed make
Hi all,
I found similar problems in the archives, but could not find the answer
I was looking for.
I just got the modem about 2 weeks ago and it has been working using the
speedtouch-etc.deb package and the configuration script from
sourceforge. I had to stop and restart it after every reboot,
Hi everybody,
I've encoutered some problems when i've try to install the speedtouch usb on
an 440LX based mainboard (debian woody/lnx 2.4.21-rc8-ac1)
sometimes, for some minutes to many weeks, the connexion goes down and this
message appears in my kern.log :
Jun 2 00:12:12 manureva kernel: u
I've just installed the latest errata kernel (2.4.20-18.7,
https://rhn.redhat.com/errata/RHSA-2003-187.html) on my RedHat 7.2 box and I
am getting errors when starting modem_run (Speedtouch 1.2 beta 1):
Jun 7 19:09:49 babelfish modem_run[885]: modem_run version 1.2-beta1
started by root uid 0
Ju
Hi,
A while ago a swapped from the kenerl mode drivers to these userland
drivers and I can say I'm impressed. Well done to you all.
One small problem has arisen though. A couple of weeks back I
experienced a problem with pppoa3 where it kept dying as pppd started
it, or soon after. Now I found
Hello all!
Following problem, I hope you can help me.
Debian 3.0 R1 (Woody)
Kernel 2.4.18.xxx
Alcatel Speedtouch USB
2 weeks ago I had a stable Suse 8.1 system running with the Speedtouch USB
modem. To get it running I used one of the thousands HOW-TOs (I used one for
Austrian). Everything worke
Hello all,
I just installed openbsd today to try it out. I remember why I didn't keep
it before, as I could never get the 1.1 speedtouch drivers to build (even
with bsd patch).
Well I grabbd the CVS (19_11) drivers and they built a-ok :)
Now, I set everything up (ppp) as previously in netbsd, ie
Hello speedtouch,
I am in Portugal and I can dial correctly. I don't think my provider
is PPPoA, but PPPoE. However, dialing with PPPoA (as in ppp.conf
sample) or with "select device PPPoE:tun0" in another ppp.conf i made
does not work. It dies and ppp's log says that it gets disconnecte
Good morning,
I have recently had BT Broadband installed and I am using the Alcatel
speedtouch modem to connect, I am using a new iMac 800mhz, I was
experiencing no problems using either OS9 or OSX, until I upgraded to a
later version of OSX 1.10.5, and now I cannot connect at all, although I can
Hello Sir,
Could you help me pointing out the following problem.:Under the latest Mac
OS 10.2(uses a kind of Kernelsystem,like linux?)the latest driver installs
not properly,however it installs correctly from the system point of view.The
usb indicator remains red.I tried many ways to set up the us
Hello,
I would be very greatful if you could help.. I have just installed a
fresh RedHat 7.2, and I'm trying to transfer my ADSL to the RedHat box..
I have downloaded the Alactel files, and the RPM from source forge.. and
tried to install.. But something's not going right..
I have looked in a
I've been through the archive and can't find this issue.
Everything is compiled, and the microcode is loaded into the Speedtouch. I
have both pap-secrets and chap-secrets files. When I try to connect, it seems
to send requests but get nothing back -- here's an extract from the syslog:
Jul 17
My friend has got suse 8 and a speedtouch modem from alcatel,
He has installed everything and configured it, everything was working but
decided to reinstall after reinstall,
the following happens:
>after i've added the next lines to the /etc/modules.conf
>
>alias char-major-108 ppp_generic
>
Hi.
I use a speedtouch adsl modem, BT broadband and redhat 7.3, and have
been trying your drivers. I have read the howto and been on a couple of
chat rooms trying to get things going. However, I'm still having problems.
Firstly, many times when running modem_run, it hangs. Sometimes it goes
t
I have exactly the same problem.
The usb controler hangs in the kernel, and the modem powers off.
The console says something like
/kernel: usb0: host controller process error
/kernel: usb0: host controller halted
My USB chipset is a INTEL 82371SB.
Michaël D.
- Original Message -
Fr
-- Apologies if this went twice but having trouble with my email atm...
Couple of questions/queries...
Firstly: I can't seem to make adsl restart after a disconnection:
ADSL starts up nicely and internet access is obtained. Several days later, adsl line
is dropped (still need to investigate e
On loading modem_run the console dumped into a debug mode with the
following message:
Warning: Driver mistake: destroy_dev on 114/6
Panic: don't do that
Debugger ("panic")
Stopped at Debugger + 0x40: xorl %eax, %eax
Any ideas apart from don't use a development release?
Liste de diff
Hi,
I've been using the speedtouch driver successfully for several weeks
using linux kernel 2.4.17, but I have tried several 2.4.18 kernels and
they all have the same problem - the connection is very unstable. The
connection works, but it seems like many frames are being dropped. If I
ping the
Hello. I am running OpenBSD 3.0. I have the
Alcatel Speedtouch USB modem (it's blue and looks
like a tadpole).
I followed the HOWTO and I am seeing errors when
I use modem_run.
# modem_run -f /usr/local/libdata/mgmt.o -m
Apr 1 23:13:46 gateway /bsd: ugenioctl: USB_SET_TIMEOUT, no pipe
Apr 1 23
Is there a good system for tracing where connection problems lie?
I've had 2 occasions in the last week where it was impossible to connect.
Yesterday's was particularly annoying. I could not connect for 6 hours.
though ie6/ms also had problems and BT my ISP claims there was a
transient non-ser
Hi,
I'm attempting to get an Alcatel Speedtouch USB/ADSL modem working under
Linux. I've successfully got the USB side working, and Alcatel's management
program is running. I've built the 2.4.7 kernel with the pppoatm-1.gz
patches
and options as suggested by
http://linux-usb.sourceforge.net/Spee
Hello,
Sorry if you have seen this problem before, but I'm Linux Newbie.
Have followed How to and have managed to get the connection up no problems.
The problem is I can only Ping the computer at the other end of the PPP
connection.
I have tried to ping static IP addressed on the Internet but I'
I run on a dual p2-350 linux (debian ) kernel 2.4.14 custom
i posted here a while back to get the drivers working and they do just fine.
However recently my isp (bt internet) has been having a few problems to say
the least and i get randomly disconnected every now and then. When i do get
disco
Hi,
This may not strictly be an ADSL driver problem but I have 2 problems:
Problem 1: I've tried to use the adsl.sh script to start the ADSL connection
at machine boot time. However it reports the modem has started ok, but the
logs contain no references to a session and no connection appears
I have been trying to use the userland SpeedTouch driver with my FreeBSD
machine without much success. It works fine on Linux, but unfortunately
that machine is going to Texas for a week soon, so I have to get FreeBSD
working...
The symptoms are as follows: ppp manages to capitalise only one of t
Hi all,
I'm installing on a second box and a new error message comes up. I have
searched Google and the archives, I see others with similiar messages but no
solution.
Its as follows:
root@enterprise:~/mgmt# /usr/local/bin/modem_run -f /root/mgmt/mgmt.o
Gotcha, I found your ADSL ALCATEL SpeedTou
Hi,
I can't seem to get Benoit's drivers working. I tried with kernel
2.4.6 and 2.4.8.
I literally followed the instructions on Benoit's page. The only difference
is that the Alcatel drivers are installed (I'm using them, while writing this
e-mail, with a 2.4.3 kernel) but _not_ loaded or star
Hi all.
Just trying to get the speedtouch working on an Abit VP6 (Dual
Processor) motherboard... But having timeout problems on the USB... The
on-board looks completly broken (Timeouts before identifying the USB
devicess), but also replacing the on-board USB with a Belkin USB card (2
port model)
43 matches
Mail list logo