> AS a second point, the MG Midgets, used HS2's
> (and of course the jets and bowls angles were different) but they too
> used a cable for the throttle setup.
I used the whole Midget setup on my wife's '73 1500 with the stock 1500
cable. Works great.
Cheers!
Mark
/// [EMAIL PROTECTED] maili
Quoted from previous message:
"I had no problem using the US 1500 ZS cable on my SU's. It doesn't
matter how far the cable sticks out beyond the sleeve. Trim it if it
bothers you."
My problem is the cable already sticks too far out of the sleeve. If I adjust the
amount the cable sticks out to t
ut we are quite sane!
Right?
What, who was that?
Can yall see me?
I see LBC people!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Nolan Penney
Sent: Monday, March 17, 2003 7:43 AM
To: [EMAIL PROTECTED]
Subject: Re: HS4 accelerator cable
I had no problem
I had no problem using the US 1500 ZS cable on my SU's. It doesn't
matter how far the cable sticks out beyond the sleeve. Trim it if it
bothers you.
>>> Chris Pappathopoulos <[EMAIL PROTECTED]> 03/16/03
06:04PM >>>
Is there a source in the states for an accelerator cable that will work
with twi
Chris Pappathopoulos" <[EMAIL PROTECTED]>
Cc: "spitfire" <[EMAIL PROTECTED]>
Sent: Sunday, March 16, 2003 6:25 PM
Subject: Re: HS4 accelerator cable
> Chris Pappathopoulos wrote:
> >
> > Is there a source in the states for an accelerator cable that will work
>
Paul and all,
Your message caused me to pause and think. It has been so long since I
did that cable conversion that I had forgotten. So I took a look under
the bonnet and discovered that I too had used the stock cable from a
1500 including the cable end just as you did. The stuff I fabricated is
tfire" <[EMAIL PROTECTED]>
Sent: Sunday, March 16, 2003 6:25 PM
Subject: Re: HS4 accelerator cable
> Chris Pappathopoulos wrote:
> >
> > Is there a source in the states for an accelerator cable that will work
> > with twin SU HS4s? Will a cable from an HS2 equipped ca
Chris Pappathopoulos wrote:
>
> Is there a source in the states for an accelerator cable that will work
> with twin SU HS4s? Will a cable from an HS2 equipped car work, or is the
> linkage different between the two setups? The cable on the car with the
> Strombergs will not work becaase the cable
