How do I check what version of Perl is installed?
You'd need to ssh into it. From my records it looks as if it should
still be using Perl 5.8... Which is about the oldest we ever supported :-).
How Linux literate are you? Would you be able to edit a file on the disk
once logged in to it?
O
Problem persists with all of the plug-ins removed, d'oh.
EricBee wrote:
> I've been paring them down to see which is causing the problem. This is
> what I'm down to at this time:
>
> 32214
EricBee's Profile: http://foru
mherger wrote:
> > So is there a version of LMS that works with Catalina âout of the
> boxâ?
>
> Depends :-). I think all recent builds do if you have your music in
> ~/Music. But if you're using an external disk or something you'll have
> to do some tweaks as outlined here.
>
> --
>
> M
I can confirm when I add the command line option "-b 2:6" - the
files plays OK. It looks like ALSA is unable to play the 325.8KHz
stream unless it has big enough buffers for high sample rate streams.
This may be specific to my setup when my USB DAC can only go up to 96kHz
and ALSA will
So is there a version of LMS that works with Catalina “out of the box”?
Depends :-). I think all recent builds do if you have your music in
~/Music. But if you're using an external disk or something you'll have
to do some tweaks as outlined here.
--
Michael
_
Hi Michael,
I am running the latest firmware from Netgear but that's a least a
couple of years old by now. Haven't been able to find a newer version
than RAIDiator 4.2.31.
I think this NAS has been unsupported for quite some time by now.
How do I check what version of Perl is installed?
Regard
So is there a version of LMS that works with Catalina out of the box?
I just upgraded and having the scanning problem and several others. Im
still using 7.9 (hadnt felt the need to update since it came out, at
least until now). Ive not yet tried the fix described here, since Im
probably due
bpa wrote:
> Just to clarify.
>
> With the problem file first - I see alsa being opened with 44100. It is
> possible that the stream has not been started and this is just the
> standard opening of the output device. So the problem si whether stream
> has been started or not OR The stream has b
bpa wrote:
> I suggest enable "-d output=debug" and see what sample rate is being set
> up to check whether this is the same problem or another problem with
> similar symptoms.
log playing DXD file
Code:
[18:12:42.308452] output_thread:687 open output device: hw:CARD=
bpa wrote:
> Just to clarify.
>
> With the problem file first - I see alsa being opened with 44100. It is
> possible that the stream has not been started and this is just the
> standard opening of the output device. So the problem si whether stream
> has been started or not OR The stream has b
Just to clarify.
With the problem file first - I see alsa being opened with 44100. It is
possible that the stream has not been started and this is just the
standard opening of the output device. So the problem si whether stream
has been started or not OR The stream has been started and the alsa
slartibartfast wrote:
> Another thing I noticed is if I play another FLAC file before the DXD
> file then skipping to the DXD file also fails to play it.
I suggest enable "-d output=debug" and see what sample rate is being set
up to check whether this is the same problem or another problem with
bpa wrote:
> With same LMS, I've gone back to squeezelite 1.9.6-1207 and I get the
> same issue - alsa opened with 44100 instead of 3528000.
>
> As I have never heard a file play without LMS resampling I don't know
> whether my setup would actually play the file.
>
> So I don't know whether I
slartibartfast wrote:
> Thanks I couldn't find that. I don't really know enough about pCP to
> know how to change the squeezelite version. Maybe someone with an actual
> need to play these files can try.
Don't bother about old version of Squeezelite - it didn't give results
but I wasn't able t
bpa wrote:
> Prebuilt client -
> https://sourceforge.net/projects/lmsclients/files/squeezelite/linux/Thanks I
> couldn't find that. I don't really know enough about pCP to
know how to change the squeezelite version. Maybe someone with an actual
need to play these files can try.
Sent from my Pi
With same LMS, I've gone back to squeezelite 1.9.6-1207 and I get the
same issue - alsa opened with 44100 instead of 3528000.
As I have never heard a file play without LMS resampling I don't know
whether my setup would actually play the file.
So I don't know whether I'm chasing the real proble
slartibartfast wrote:
> I only just started using pCP last week. Where would I find different
> Squeezelite versions?
>
> Sent from my Pixel 3a using Tapatalk
Prebuilt client -
https://sourceforge.net/projects/lmsclients/files/squeezelite/linux/
--
bpa wrote:
> Try different version of squeezelite rather than LMS. I wonder if it is
> related to native support of ogg/flac.I only just started using pCP last
> week. Where would I find different
Squeezelite versions?
Sent from my Pixel 3a using Tapatalk
-
slartibartfast wrote:
> I just tried LMS 8.0.0-1590315682 on Windows from May 24 2020 and the
> issue is there as well. I'll try 7.9.2 when I get it running.
Try different version of squeezelite rather than LMS. I wonder if it is
related to native support of ogg/flac.
---
I've been paring them down to see which is causing the problem. This is
what I'm down to at this time:
32214
mherger wrote:
> > It only works when I start LMS in "safe mode". Something is
> interfering
> > with proper operation, apparently.
>
> Safe mode would disable all plugins. What plugin
mherger wrote:
> > At a guess, sample rate is retrieved from decoded audio data, for
> first
> > file played - this value is not getting to alsa_open routine.
>
> But how would LMS be involved in this? I haven't tested it yet, but I'm
> having a hard time to believe that this would be a server
However, I did lose the graphical interface, but not functionality, from
my current SqueezePlay install. It can be operated via the LMS web
interface for now.
There's an updated Squeezeplay available which fixes this issue.
https://sourceforge.net/projects/lmsclients/files/squeezeplay/osx/
--
mherger wrote:
> > At a guess, sample rate is retrieved from decoded audio data, for
> first
> > file played - this value is not getting to alsa_open routine.
>
> But how would LMS be involved in this? I haven't tested it yet, but I'm
>
> having a hard time to believe that this would be a serv
At a guess, sample rate is retrieved from decoded audio data, for first
file played - this value is not getting to alsa_open routine.
But how would LMS be involved in this? I haven't tested it yet, but I'm
having a hard time to believe that this would be a server side change...
--
Michael
__
apassio wrote:
> Hello, anyone has tried to run LMS on Big Sur? Currently running 7.9.4
> on Catalina (having had to tweak file permissions for perl). Any
> suggestions before I upgrade Mac OSX? Thanks.
I had a perfect upgrade to OS X 11 from a working Catalina install of
LMS 7.9.4. All permis
If squeezelite is run with "-d output-debug" - sample rate used is show
at line alsa_open Line 351
When HiresPCM is played first - ALSA device is opened with sample rate:
44100
If a playlist is used with say 48kHz first and 352.8kHz second - then
ALSA is opened first with 48000 and then with 35
Hi Jacob
I'd like to repeat bpa's question: is your ReadyNAS firmware up to date?
Would you know what perl version is installed on it?
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman
It only works when I start LMS in "safe mode". Something is interfering
with proper operation, apparently.
Safe mode would disable all plugins. What plugins are you using?
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
Well when I don't see these errors I'm able to navigate the Music
Folder, and vice versa. So its related.
It only works when I start LMS in "safe mode". Something is interfering
with proper operation, apparently.
mherger wrote:
> >
> \\NETWORKDRIVE\Music\Downloads\Classical\Vivaldi\70418885135
mherger wrote:
> > At the moment it looks like LMS having received the GET - LMS just
> stops
> > playing or doesn't start playing the data from the file.
> >
> > I need to do a bit more digging - but short cut would be any thoughts
> on
> > what LMS changes in last 4 months could have done thi
\\NETWORKDRIVE\Music\Downloads\Classical\Vivaldi\7041888513520_01_13_192kHz.flac:
The thread's subject line says "Music Folder empty". This has nothing to
do with the error you're posting, has it? After all you seem to have
been able to navigate down several folders?
--
Michael
The scan completed and the music folder populated.
When I restart the server normally I get the same errors, any idea what
to try?
[20-11-17 08:14:20.0152] main::init (388) Starting Logitech Media Server
(v8.0.0, 160468, Thu Nov 5 09:13:10 WEST 2020) perl 5.014001 -
MSWin32-x86-multi-threa
I restarted the server in "safe mode" and am scanning again, so far no
errors. So its a problem with one of the plugins? I'll paste the list
here after the scan completes.
EricBee's Profile: http://forums.slimdevices.com/m
Thanks for the response.
I'm seeing a bunch of "file missing" errors even though they are present
on the disc (and I didn't have this problem in the past, though I just
setup LMS on a new system). I just tried a rescan and see a bunch of
these errors. The missing files appear to be kinda rando
At the moment it looks like LMS having received the GET - LMS just stops
playing or doesn't start playing the data from the file.
I need to do a bit more digging - but short cut would be any thoughts on
what LMS changes in last 4 months could have done this ?
Is there any last known working ver
JM Gray wrote:
> I just posted a similar issue today, and got a response to try updating
> to LMS 8.0. So far, this appears to be working now after restarting
> everything. Anyway, wanted to pass this along in case it helps.
Thanks for the info. Can one can revert back to 7.9.3 from 8.0?
---
Lestrad wrote:
> Hmm... Since I know a little VBScript, could I use that instead of
> Python?
The "command" can be any command - all Material does here is blindly
call whatever is set in the string.
*Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json
(Use http: //SERVER:
You would launch cscript.exe or vbscript.exe rather than python
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and rte ireland
--
I think this will much easier with a cron job that just does "service
logitechmediaserver restart"... systemd.timers is way more complexed
than I need.
Best Regards
Bamsefar
Bamsefar's Profile: http://forums.slimdevices.c
cpd73 wrote:
> The script is javascript, so yes it could do path conversion, etc.
> Pretty sure it cannot launch another app though - as the script runs in
> the browser. If you want to launch a command the you can use "command"
> and not "script" as the action. This would start a command on the
LMS sends some data to player and then stops. Looking at slimproto
response buffers gets filled & I think all the buffers are full.
Maybe LMS stopped sending because buffer are full or because although
threshold reached, LMS has not told player to start playing.
---
Lestrad wrote:
> Wow. That works. I know this is beyond the call of duty, but can the
> script (which I assume is what's in the line beginning "*"script"*" up
> to the first "*"*") be altered to convert the path that's sent to the
> clipboard from //Linux /to \\Windows\ ? And/or possibly call an
mherger wrote:
> > 1. standard latest Ralphy Squeezelite with an ordinary audio (no
> special
> > DAC needed) - crtiical capabilities to be reported to LMS in sendHELO
> > "MaxSampleRate=768000,dsf,dff" - I found an ALSA plughw allowed the
> > high rate which is not supported by audio h/w
> > 2
1. standard latest Ralphy Squeezelite with an ordinary audio (no special
DAC needed) - crtiical capabilities to be reported to LMS in sendHELO
"MaxSampleRate=768000,dsf,dff" - I found an ALSA plughw allowed the
high rate which is not supported by audio h/w
2. Get a Stereo 24BIT/352.8kHz test fil
cpd73 wrote:
> If you use Material skin, you can add an entry to the context menu shown
> when you right-click (or long press for mobile) on the cover in
> now-playing. ...
>
> Selecting "Copy file location" from the menu will copy the location of
> the current track to the clipboard.
Wow. Tha
bpa wrote:
> To test
> 1. standard latest Ralphy Squeezelite with an ordinary audio (no special
> DAC needed) - crtiical capabilities to be reported to LMS in sendHELO
> "MaxSampleRate=768000,dsf,dff" - I found an ALSA plughw allowed the
> high rate which is not supported by audio h/w
> 2. Get
mherger wrote:
> > So we all see exactly the same symptoms. I wonder if @mherger has
> seen
> > this thread.
>
> I've seen but not followed it. I must admit that when I see 352 bits or
>
> whatever that I'm out pretty quickly :-)
>
> Could somebody please summarize the findings, ways to repro
So we all see exactly the same symptoms. I wonder if @mherger has seen
this thread.
I've seen but not followed it. I must admit that when I see 352 bits or
whatever that I'm out pretty quickly :-)
Could somebody please summarize the findings, ways to reproduce etc.?
--
Michael
Bamsefar wrote:
> I have to admit that I am not very familiar with systemd timer - any
> suggested good web page where I could read up?
I Googled systemd timer example and got this - Google is your friend:
https://www.linux.com/topic/desktop/setting-timer-systemd-linux/
--
49 matches
Mail list logo
