try to execute sudo (propably it is in path) by simply calling sudo from
the shell or try to find it.
qnapfan's Profile: http://forums.slimdevices.com/member.php?userid=67678
View this thread:
qnapfan wrote:
> ok, just to be sure, can you please check, wether you have sudo
> (propably opt install)
How do I check?
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x Boom, 2x SB3
ok, just to be sure, can you please check, wether you have sudo
(propably opt install)
qnapfan's Profile: http://forums.slimdevices.com/member.php?userid=67678
View this thread:
qnapfan wrote:
>
> @jasell
> Did you use sudo (can be changed in the config) ?
No, I did no modifications, just installed OOTB.
Slimserver.pl is owned by SqueezeboxServer
in my resource manager.
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services:
Still in my project, but i need to get my brain free ;-)
I still had not tested,
Just some ideas.
In My setup, after installing the first start always fails, script
adjusts the permisssion, but succesfull start only in the second
attemp.
@digimaster i have not looked into the actual script,
digimaster wrote:
> Oke looked at the source, and the info from Qnapfan.
> Also tried same stuff, and change a few things.
>
> Please do a clean install with this beta. 'QLogitechMediaServer V1.06.d
> for QNap QTS 4.2 or higher' (https://goo.gl/p6N1kJ)
>
> If it wont start, there will be a
blackbite wrote:
> Should I install over existing 1.05a?
> Is there something special for the default download share? I didn't
> change rights there. Could the new "run as sudo" change the behavior?Sure you
> can install it as a upgrade.
Send from my mobile Phone
*
maintainer of
digimaster wrote:
> Very strange, here it did the update.
> You could try to install the beta version V1.06.d
Should I install over existing 1.05a?
Is there something special for the default download share? I didn't
change rights there. Could the new "run as sudo" change the behavior?
NAS:
Very strange, here it did the update.
You could try to install the beta version V1.06.d
blackbite wrote:
> Hi digimaster,
> Unfortunately still no working update function.
> logitechmediaserver-7.9.1-1516947667 is out and I'm still on 7.9.1 -
> 1516565589. Manual update search also say that
digimaster wrote:
> Oké do (cd /share/*/.qpkg/LogitehMediaServer) and then (rm
> SlimServer/.INSTALLED). And (./LogitehMediaServer.sh restart).
>
> Send from my mobile Phone
Hi digimaster,
Unfortunately still no working update function.
logitechmediaserver-7.9.1-1516947667 is out and I'm
As soon as the beta is ready to release.
steklo wrote:
> That's great news! Do you have any idea when QLogitechMediaServer is
> going to appear in the appstore?
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Oke look at the source, and the info from Qnapfan.
Also tried same stuff, and change a few things.
Please do a clean install with this beta. 'QLogitechMediaServer V1.06.d
for QNap QTS 4.2 or higher' (https://goo.gl/p6N1kJ)
If it wont start, there will be a logfile in the LogitechMediaServer
digimaster wrote:
> *
> Some good news, QLogitechMediaServer is gone be include in the appstore
> !
> *
That's great news! Do you have any idea when QLogitechMediaServer is
going to appear in the appstore?
steklo's
Qnapfan thanks for the info, and checking on it.
Looked on it this morning, and yes it comes from the LMS packets
itself.
Strangly enough i use the same perl i686 on my QNap, no trouble no
errors.
I uses the i686 perl version, because it needs less memory then the
x86_64 perl version.
The only
look at https://github.com/Fourdee/DietPi/issues/65, sounds like a
permisssion problem
qnapfan's Profile: http://forums.slimdevices.com/member.php?userid=67678
View this thread:
Hi digimaster,
i am currently in a Project and really busy, so i had no time to test
your latest build, regarding the problem, Appender.pm is an perl module
that comes with slimserver, not from our perl package.
I am only guessing, what if jasell tries to start slimserver by.
Code:
jasell wrote:
> oki.
>
> I appreciate you effort and support!No problem, as it a beta, I Lear from the
> input. Very important as it's
gone be included in the appstore.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with
digimaster wrote:
> Oké there it is, a problem with a CPAN module. That I have to ask
> Qnapfan, as he compiled the i686 perl.
>
> Send from my mobile PhoneSo no problem with running the qpkg packets.
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
digimaster wrote:
> Oké there it is, a problem with a CPAN module. That I have to ask
> Qnapfan, as he compiled the i686 perl.
>
> Send from my mobile Phone
oki.
I appreciate you effort and support!
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
jasell wrote:
> >
Code:
> >
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./SlimServer/slimserver.pl
--user squeezeboxserver --httpport 9001
> Can't call method "log" on an undefined value at
digimaster wrote:
> Try SlimServer/SlimServer.pl.pl --user squeezeboxserver --httpport 9001.
> After that pidof SlimServer.pl I think that will work,
>
> Send from my mobile Phone
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./SlimServer/slimserver.pl
digimaster wrote:
> Try SlimServer/SlimServer.pl.pl --user squeezeboxserver --httpport 9001.
> After that pidof SlimServer.pl I think that will work,
>
> Send from my mobile PhoneOeps only .pl
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a,
Try SlimServer/SlimServer.pl.pl --user squeezeboxserver --httpport 9001.
After that pidof SlimServer.pl I think that will work,
Send from my mobile Phone
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap TS-453a, with LogitechMediaSever 7.9.1 ( with spotty and youtube )
Serval
digimaster wrote:
> The symlink I wrote is good. But then it works. Oke and if that works,
> from the LogitehMediaServer directory try SlimServer/SlimServer.pl
> --help. What does it shows then?
>
> Send from my mobile Phone
Code:
jasell wrote:
> perl -v does not work unless I start with setting the symlinks as you
> posted earlier.
>
> is there a way to set them to be persitent?
>
> if I do... I get...
> >
Code:
> >
> [/share/MD0_DATA/.qpkg/LogitechMediaServer/.Perl/perl/bin] # perl -v
>
digimaster wrote:
> What does perl -v do?
>
> Send from my mobile Phone
perl -v does not work unless I start with setting the symlinks as you
posted earlier.
is there a way to set them to be persitent?
if I do... I get...
Code:
jasell wrote:
> >
Code:
> >
> [~] # ps | grep [L]ogitech
> 23195 squeezeboxserver 70972 S /usr/bin/perl
/share/MD0_DATA/.qpkg/LogitechM
> [~] #
>
> >
>
> After killing the process I can't get it running again...What does perl -v
>
digimaster wrote:
> A very strange problem, as with pidof it give a number.
> Could you try the following [ ps | grep [L]ogitech ]
>
> Also strange it seems the perl can run if you do perl -V.
> You don't have anything else installed which is using poort 9001
>
> What you could try is kill -9
jasell wrote:
> I have two qnap-systems... one that is running LMS on SSOTS as I'm
> playing around with the other to get your new QLMS running...
>
> I check the /lib/ folder on the other system as well, it also have the
> same ld-2.6.1.so
>
> Both systems are updated to the latest QTS 4.2.6
digimaster wrote:
> /lib/
>
> Send from my mobile Phone
I have two qnap-systems... one that is running LMS on SSOTS as I'm
playing around with the other to get your new QLMS running...
I check the /lib/ folder on the other system as well, it also have the
same ld-2.6.1.so
Both systems are
A very strange problem, as with pidof it give a number.
Could you try the following [ ps | grep [L]ogitech ]
Also strange it seems the perl can run if you do perl -V.
You don't have anything else installed which is using poort 9001
What you could try is kill -9 ( and then the number which you
I still get the same process ID, it has been running for hours now.
When browsing to serverIP:9001 I get error messages
ERR_EMPTY_RESPONSE
Sent from my iPhone using Tapatalk
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x
jasell wrote:
> I searched in /lib/ and through the file system no ld-2.25.so to be
> found.
>
> Can that be added/installed in some way?If you do pidof slimserver.pl it give
> you number, which indicats that
it's running. So When started should after a few minutes give acces to
the webgui.
digimaster wrote:
> /lib/
>
> Send from my mobile Phone
I searched in /lib/ and through the file system no ld-2.25.so to be
found.
Can that be added/installed in some way?
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x
jasell wrote:
> Two questions...
> Where should I look for ld-2.25.so? in /lib/ I only have ld-2.6.1.so
>
> How do I do a symlink that is persitent? if I remember correct it's the
> ln stuff (I'm really just a trial'n'error guy...)/lib/
Send from my mobile Phone
*
maintainer of
digimaster wrote:
> Oké think that you, re ld-linux.so.2 is wrong symlinked. Check if
> ld-2.25.so exist and do a symlinked to ld-linux.so.2.
>
> Send from my mobile Phone
Two questions...
Where should I look for ld-2.25.so? in /lib/ I only have ld-2.6.1.so
How do I do a symlink that is
I've been watching this with interest, and waiting to jump in. A few
questions..
- You mentioned that it will soon be added into the official app
store. Is that correct, and when is this likely?
-
- Does this run under QTS, or in a container? I ask because I use
MusicIP, and do not
digimaster wrote:
> Through pidof it says that is running. So it should work,
>
> Send from my mobile PhoneOké think that you, re ld-linux.so.2 is wrong
> symlinked. Check if
ld-2.25.so exist and do a symlinked to ld-linux.so.2.
Send from my mobile Phone
*
maintainer of
jasell wrote:
> I started by uninstalling previous QLMS, checking the no such directory
> was left under .qpkg
> I renamed .qpkg/Optware to foo.Optware ( I think Optware was installed
> by Perl QPKG a longtime ago)
> I made a system reboot
> I did a manuall install of your latset 1.06C version
>
digimaster wrote:
> A NEW BETA RELEASE FOR QLOGITECHMEDIASERVER, WITH SUPPORT FOR
> ARCHITECTURE X86/I686.
> CHANGE SOME MINOR THING ON INSTALLATION AND INIT-SCRIPT.
> ON QTS 4.2 WITH X86_64 WITH A MIXED OF ELF32/ELF64 ENVIRONMENT, THE FILE
> /LIB/LD-LINUX.SO.2 IS NEEDED TO MAKE PERL WORK.
> SO
*
A new beta release for QLogitechMediaServer, with support for
architecture x86/i686.
Change some minor thing on installation and init-script.
On QTS 4.2 with x86_64 with a mixed of ELF32/ELF64 environment, the file
/lib/ld-linux.so.2 to make perl work.
So please check if it exist before
I read serveral things run, but go wrong.
Suggestion, remove QLogitechMediaServer through appstore.
Then reboot your're Qnap and do a clean install.
Wait until its ready, and then do logon to you're Qnap by ssh shell.
The [ cd /share/*/.qpkg/LogitechMediaServer ] and the [
./LogitechMediaServer
digimaster wrote:
> Oké the correct perl is installed. Do chmod -R 0775 SlimSlimServer/ in
> the LogitehMediaServer directory. And then try starting it again.
>
> Send from my mobile Phone
ok, now i get some more...
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] #
jasell wrote:
> .Perl/perl-version?
> >
Code:
> > [/share/MD0_DATA/.qpkg/LogitechMediaServer] # .Perl/perl-version
> .Perl/perl-version: line 1: perl-1686: command not found
> >
>
> Same result, but I don't get the process running any more...Oké
digimaster wrote:
> Oké with the chmod I forget do chmod -R 0775 SlimServer. Could you also
> do in the LogitehMediaServer cat .Perl/perl-version?
>
> Send from my mobile Phone
.Perl/perl-version?
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # .Perl/perl-version
jasell wrote:
> For the first two I probably miss a path or I'm in the wrong directory
> >
Code:
> > [/] # which perl
> [/] # perl -v
> -sh: perl: command not found
> [/] #
> >
>
> "/lib/ld-linux.so.2" exist
>
> >
Code:
digimaster wrote:
> Stranges because if you read the log, looks like I issue with own er
> right. Could you do ( which perl) and (perl - v). Check if
> /lib/ld-linux.so.2. And do (cd /share/*/.qpkg/LogitehMediaServer) and
> then (chmod
> -R SlimServer/) and (chown -R squeezeboxserver
digimaster wrote:
> Oké do (cd /share/*/.qpkg/LogitehMediaServer) and then (rm
> SlimServer/.INSTALLED). And (./LogitehMediaServer.sh restart).
>
> Send from my mobile Phone
Ok, thanks. We give feedback when next nightly is released.
But isn't the LogitechMediaServer.sh still only looking
blackbite wrote:
> @digimaster
>
> Update function is no longer working for me, since I'm on 1.05a.
> With 1.03 there was no problem. Did fresh install and set the .QLMS.conf
> to:
> UPDATE=0
> NIGHTLY=1
>
> What else can I check or try?
>
> P.S. I'm on TS-451, FW 4.3.4Oké do (cd
jasell wrote:
> Yes, there is a LogitechMediaServer/.Perl
>
> This is my LogitechMediaServer.log
> >
Code:
> > [19:33:59 23-01-2018] Please wait a few minuts, have to build LMS from
scratch !
> [19:34:34 23-01-2018] Upgrading LogitechMediaServer to 7.9.1-1516565589,
digimaster wrote:
> Have you check the LogitehMediaServer directory, if there a. Perl
> directory, and look if there is a LogitehMediaServer. log.
>
> Send from my mobile Phone
Yes, there is a LogitechMediaServer/.Perl
This is my LogitechMediaServer.log
Code:
jasell wrote:
> No success :-(
>
> But you are mentioning to disable Optware.
> I noticed that I have Optware (/sgare/MD0_DATA/.qpkg/Optware) on my
> system.
> I think it was installed when I installed the Perl package in a previous
> attempt to get Spotty running on SSOTS/LMS...
> I have now
@digimaster
Update function is no longer working for me, since I'm on 1.05a.
With 1.03 there was no problem. Did fresh install and set the .QLMS.conf
to:
UPDATE=0
NIGHTLY=1
What else can I check or try?
P.S. I'm on TS-451, FW 4.3.4
digimaster wrote:
> Oke keep in mind, this is only a beta version, so can do strange things
> on you're system.
> But with a lot off help by Qnapfan, there now also is support for
> x86/i686 Qnap systems.
> It will also work for those how own a mixed x86_64 nas systems running
> on QTS 4.2
>
>
Oke keep in mind, this is only a beta version, so can do strange things
on you're system.
But with a lot off help by Qnapfan, there now also is support for
x86/i686 Qnap systems.
It will also work for those how own a mixed x86_64 nas systems running
on QTS 4.2
Before you try it, backup you're
digimaster wrote:
> Qnap fan did a great job and made a ELF32 Version of perl with
> spotty/youtube support. So a beta is coming up. Have to find away to
> make a proper install on a mixed ELF64/ELF32 Qnap nassystem.
>
> Verstuurd vanaf mijn Mi A1 met Tapatalk
Great, let me know if you need
jasell wrote:
> Thanks!
> Then I wait for a new qpkg.
>
>
> Sent from my iPhone using TapatalkQnap fan did a great job and made a ELF32
> Version of perl with
spotty/youtube support. So a beta is coming up. Have to find away to
make a proper install on a mixed ELF64/ELF32 Qnap nassystem.
qnapfan wrote:
> @jasell
>
> your did not "damaged" your libnsl.so.1 as you are running QTS 4.2x
> (like me) we have a 64 kernel and some librarys are 32 bit (got this
> information from the german qnap forum) you have to use the upcomming
> package from digimatsre with 32bit perl.
Thanks!
@jasell
your did not "damaged" your libnsl.so.1 as you are running QTS 4.2x
(like me) we have a 64 kernel and some librarys are 32 bit (got this
information from the german qnap forum) you have to use the upcomming
package from digimatsre with 32bit perl.
digimaster wrote:
> Why is there a error on /lib/libnsl.so.1, as the error is thats its a
> ELF32 and not ELF64.
> You can use ELF32 file beside other on QNAP, but PERL is a interpreter
> and the file and libs it needs, have to be ELF64.
> And there lays you're error, why LMS wont start, as Perl
Hi,
do I still need the touch UPDATE to enable automatic updates or is it
now all included in the .QLMS.conf?
I'm asking, because on 1.03 the nightly updates worked well. But since
1.05a I'm not getting the lastest nightly updates anymore.
My settings are:
UPDATE=0
NIGHTLY=1
Please can anyone
digimaster wrote:
> *
> Some good news, QLogitechMediaServer is gone be include in the appstore
> !
>
> And the other things is, work on support for i686,x86.
> Still in prebeta,
>
> It would be nice to hear, if it works on which QNap nas-systems and QTS
> version ?
> *
Congrats!
*
Some good news, QLogitechMediaServer is gone be include in the appstore
!
And the other things is, work on support for i686,x86.
Still in prebeta,
It would be nice to hear, if it works on which QNap nas-systems and QTS
version ?
*
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Why is there a error on /lib/libnsl.so.1, as the error is thats its a
ELF32 and not ELF64.
You can use ELF32 file beside other on QNAP, but PERL is a interpreter
and the file and libs it needs, have to be ELF64.
And there lays you're error, why LMS wont start, as Perl runs into
problem.
You're
Nice to read, that at lat at you're end its work.:D
Its clear there where a few thing wrong, you're tar has a problem with
gzip, or there is some strong on you're directory layout !
( that why the SlimServer was not filled on installation ! ).
And you're old prefs and Cache from a SSODS/SSOTS
Playing RadioParadise FLAC. Thanks again!
earthbased's Profile: http://forums.slimdevices.com/member.php?userid=334
View this thread: http://forums.slimdevices.com/showthread.php?t=108292
I uninstalled SSOTS before installing your QPKG. Why is SSODS
referenced in new log trying to make a directory in opts?
earthbased's Profile: http://forums.slimdevices.com/member.php?userid=334
View this thread:
digimaster wrote:
> Thats strange, there is a lib file which does not has the good arch.
> Could you do file /lib/libnsl.so.1 ?
> If correct will point to another file, and then do file with the name of
> that file.
>
> Are you on a ELF64/x86_64 QTS QNap or ELF32/X86(i686,i386) QTS QNap ?
> As
*
New release of QLogitechMediaServer V1.05a for Qnap QTS 4.2 or higher
with x86_64 ( 17-01-2018 )
MDS5 check [ 29ab7109e313525831de669c7c4408df
LogitechMediaServer_1.05_x86_64.qpkg ]
'QLogitechMediaServer V1.05a for Qnap QTS 4.2 or higher with x86_64'
(https://goo.gl/Phf5VY) :D
Don't look at the 346 error, is just a check. Nothing to do with the
startup.
This error will be fixed in next release.
If you looked proper on the logfile, you would have nticed to permision
error on the prefs directory.
And i see something about ssots.
in the SlimServer directory you could
Removed LMS, ran Qboost, installed v1.05 again:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
status
/share/MD0_DATA/.qpkg/LogitechMediaServer/.config/.QLMS.func: line 346:
[[: 1.7T: syntax error: invalid arithmetic operator (error token is
".7T")
LogitechMediaServer is
digimaster wrote:
> You can only copy the cache and prefs directory, when you first do
> ./LogitechMediaServer.sh stop.
> Then copy the directory, and the ./LogitechMediaServer.sh start.
> Never copy those while LMS is running, it will make it crash.
>
> The other error has to do with you
Thats strange, there is a lib file which does not has the good arch.
Could you do file /lib/libnsl.so.1 ?
If correct will point to another file, and then do file with the name of
that file.
jasell wrote:
> Still not working for me...
>
> I tried to upgrade to the new 1.05 version.
> First I
You can only copy the cache and prefs directory, when you first do
./LogitechMediaServer.sh stop.
Then copy the directory, and the ./LogitechMediaServer.sh start.
Never copy those while LMS is running, it will make it crash.
The other error has to do with you available space, know where the
I cannot cp my prefs and cache cause stopping LMS and doing that then
starting broke the install. About to go insane (other problems too,
world broke).
earthbased's Profile:
Log file:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # cat
LogitechMediaServer.log
[06:36:21 16-01-2018] Please wait a few minuts, have to build LMS from
scratch !
[06:36:44 16-01-2018] Upgrading LogitechMediaServer to 7.9.1-1516049992,
please wait !
[06:37:04 16-01-2018] Starting
Still not working for me...
I tried to upgrade to the new 1.05 version.
First I uninstalled the previous verison from Appcenter, made a reboot.
Manually installed the 1.05 version.
I got a few "warnings" stating is was still up Upgrading.
At the end I got a warning:
"[QLogitechMediaServer]
earthbased wrote:
> After restoring my /Cache and prefs,
>
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
> start
> /share/MD0_DATA/.qpkg/LogitechMediaServer/.config/.QLMS.func: line 346:
> [[: 1.7T: syntax error: invalid arithmetic operator (error token is
> ".7T")
>
earthbased wrote:
> More:
>
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh*
> stop
> /share/MD0_DATA/.qpkg/LogitechMediaServer/.config/.QLMS.func: line 346:
> [[: 1.7T: syntax error: invalid arithmetic operator (error token is
> ".7T")
> Stopping LogitechMediaServer
earthbased wrote:
> v1.05 installed OK; playing my FLAC files. Have to do some configuring
> but have to leave now. Thanks!
More:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh*
stop
/share/MD0_DATA/.qpkg/LogitechMediaServer/.config/.QLMS.func: line 346:
[[: 1.7T:
digimaster wrote:
> Try to install the V1. 05, it has been made to check a system on why
> there is a error.
>
> Send through tapatalk!
v1.05 installed OK. Have to do some configuring but have to leave now.
dolodobendan wrote:
> You're very welcome, glad I could help!Through you're input could make a
> better version that runs on different
systems. Next step trying to included support for x86_64, i686.
Send through tapatalk!
*
maintainer of QLogitechMediaServer and Qnap-Optware-NG.
Qnap
earthbased wrote:
> [~] # df -h /share
> FilesystemSize Used Available Use% Mounted on
> tmpfs16.0M 12.0K 16.0M 0% /shareTry to install
> the V1. 05, it has been made to check a system on why
there is a error.
Send through tapatalk!
*
digimaster wrote:
> The only way that Qnap shows a messages in the Qnap webgui.
> But fixed it, so the it not a error but warning, included in final
> release.
> Thanks for the input .
You're very welcome, glad I could help!
LMS 7.9.1@1.05 (digimaster) / QNAP 469L QTS 4.3.4
digimaster wrote:
> Try to included some checkup on installation, will be in on the next
> release.
>
> In a ssh shell could you do df -h /share
> The /share is always 0% but there are more.
> Strangely some is going wrong on you're Qnap while extracting the LMS in
> the SlimServer/.
> The
*New release of QLogitechMediaServer V1.05 for Qnap QTS 4.2 or higher
with x86_64 ( 15-01-2018 )
MDS5 check [ 3e7cccd81761d79d5756420cf9b7270a
LogitechMediaServer_1.05_x86_64.qpkg ]
'QLogitechMediaServer V1.05 for Qnap QTS 4.2 or higher with x86_64'
(https://goo.gl/vfpd8J) :D
Try to included some checkup on installation, will be in on the next
release.
In a ssh shell could you do df -h /share
The /share is always 0% but there are more.
Strangely some is going wrong on you're Qnap while extracting the LMS in
the SlimServer/.
The problem is, tar has many errors code,
earthbased wrote:
> After receiving a warning on SWAP space I rebooted and now /share Used %
> is 0! How can this be?
>
> [~] # df -k
> Filesystem 1K-blocks Used Available Use% Mounted on
> none221184202888 18296 92% /
> devtmpfs
earthbased wrote:
> What files should be where? Screenshots or list please.
After receiving a warning on SWAP space I rebooted and now /share Used %
is 0! How can this be?
[~] # df -k
Filesystem 1K-blocks Used Available Use% Mounted on
none221184
digimaster wrote:
> Looks like it's running, could you do. /LogitehMediaServer.sh status in
> putty?
>
> Which Qnap and QTS are you using ?
>
> Send through tapatalk!
This is what I get...
Code:
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
digimaster wrote:
> I am afraid, that's there something very strange happening with you're
> Qnap. The only thing you could try is download the latest nightly lms.
> Put it in the LogitehMediaServer directory, and do tar - xvpf (the
> filename) -C SlimServer --stripdown=1. And then do ls
Thanks for this info, found that there is something wrong there.
Gone fix is in the officieel release !
digimaster wrote:
> Looks like it's running, could you do. /LogitehMediaServer.sh status in
> putty?
>
> Which Qnap and QTS are you using ?
>
> Send through tapatalk!
*
maintainer of
dolodobendan wrote:
> The only thing I noticed was that the LMS update was categorized as an
> "error". Other than that I have no complaints! (yet [emoji14] )
>
> 24396
>
> >
Code:
> >
> [21:02:53 14-01-2018]Starting LogitechMediaServer in Background.
> [21:03:04
earthbased wrote:
> [/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
> start
> Slimserver.pl is missing or corrupted, check if it's present the
> SlimServer directory
>
> and /Slimserver is empty except for .INSTALLED*:
>
>
jasell wrote:
> Hi,
> I have trouble to succesfully install this.
> I download the zip-archive, unzip the files, an from QNAP I do a
> manually install browsing to "LogitechMediaServer_1.02_x86_64.qpkg" and
> then select install.
>
> During this process, which take close to a minute, I get a
digimaster wrote:
> You could try the latest beta, in there are many changes regarding the
> way it installs the first times. So maybe it will solve youre problem.
>
> Send through tapatalk!
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh
start
Slimserver.pl is missing
Hi,
I have trouble to succesfully install this.
I download the zip-archive, unzip the files, an from QNAP I do a
manually install browsing to "LogitechMediaServer_1.02_x86_64.qpkg" and
then select install.
During this process, which take close to a minute, I get a warning:
[LogitechMediaServer]
digimaster wrote:
>
> THIS WILL be the release candidate for V1.03 ! ( So if something goes
> wrong let me know please ! )
>
The only thing I noticed was that the LMS update was categorized as an
"error". Other than that I have no complaints! (yes :p )
24396
Code:
earthbased wrote:
> Still waiting for QNAP tech support response but looks like I have to
> rebuild the QNAP system from scratch. File System tech is archaic.You could
> try the latest beta, in there are many changes regarding the
way it installs the first times. So maybe it will solve youre
*New release of LogitechMediaServer for Qnap x86_64 version 1.03.4.beta
( 14-01-2018 )
MDS5 check [ 8c6e559190eaa46cd353f65890ec917b
LogitechMediaServer_1.03.4beta_x86_64.qpkg ]
'QLogitechMediaServer for Qnap x86_64 version 1.03.4beta'
(https://goo.gl/93rZAQ) :D
Remember beta is for testing
501 - 600 of 721 matches
Mail list logo
