Hi,
At 01.36 10/12/2005, =?ISO-8859-2?Q?Micha=B3_Margula?= wrote:
Hello!
I was trying to find solution for my problem for a long
long time, but I had no luck. Everything started when I installed
Gentoo with Squid on 64 bit architecture. It is dual Xeon 3.4 with
2 GB of RAM. My
Hi,
I have a problem with SQUID. I configured squid to use a parent cache
(it HAS to use the parent cache since the box has no direct internet
connection). I have no access to the parent cache.
The problem is: Sometimes the parent cache can't resolve hostnames,
while the local box running MY
Hi,
I wish to permit the web access only to users authenticated on the Samba
PDC, running on the same server Squid is running on..
I found a lot of howto about configuring Squid with a Windows 2003 PDC,
but what about if the PDC is managed by a Samba server running on the
same server with
Hi everyone..
i have a problem with squid here
my Yahoo Messenger didn't work correctly
i have set proxy in Yahoo Messenger
i can sign in.. but when join a room there was error like :
You have been sign out because you signed in on a different computer or device
Signing in to Chat took longer
Hi everyone..
i have a problem with squid here
my Yahoo Messenger didn't work correctly
i have set proxy in Yahoo Messenger
i can sign in.. but when join a room there was error like :
You have been sign out because you signed in on a different computer or device
Signing in to Chat took longer
Hi everyone..
i have a problem with squid here
my Yahoo Messenger didn't work correctly
i have set proxy in Yahoo Messenger
i can sign in.. but when join a room there was error like :
You have been sign out because you signed in on a different computer or device
Signing in to Chat took longer
On 10.12 20:00, [EMAIL PROTECTED] wrote:
i have set proxy in Yahoo Messenger
i can sign in.. but when join a room there was error like :
You have been sign out because you signed in on a different computer or
device
you probably use more than one proxy... either DNS or some kind of Level 3
Hi,
I wish to permit the web access only to users authenticated on the Samba
PDC, running on the same server Squid is running on..
I found a lot of howto about configuring Squid with a Windows 2003 PDC,
but what about if the PDC is managed by a Samba server running on the
same server with
Hi,
My squid has died for the first time in almost 12 months ! I have found the
following error in the cache.log
2005/12/10 13:55:37| WARNING: Disk space over limit: 35858224 KB 2560
KB
2005/12/10 13:55:49| WARNING: Disk space over limit: 35838652 KB 2560
KB
2005/12/10 13:56:00|
I'm running Squid V2.5Stable10 and Samba 3.0.14a using NTLM authentication
and configured according to the FAQ (Winbind). All is working great except
the PDC Admin has told me that all my authentications are occurring
against only one of the two domain controllers. So, my question is likely
The server had already been configured with the line
half_closed_clients off
--Brett Glass
At 02:54 PM 12/8/2005, Matus UHLAR - fantomas wrote:
On 07.12 23:06, Brett Glass wrote:
Just today, I noticed that a transparent Squid proxy running on
FreeBSD 4.11 was really bogging down its
I am trying to setup squid to allow one user by ip address and block
another user on another ip address.
This is what I have so far.
acl julie src 192.168.1.20/24
acl jess src 192.168.1.12/24
http_access allow localhost
http_access allow julie
http_access deny jess
# And finally deny all other
Hey Barry,
Try this:
acl julie src 192.168.1.20/32
acl jess src 192.168.1.12/32
HTH,
Pieter
-Original Message-
From: Barry Rumsey [mailto:[EMAIL PROTECTED]
Sent: 2005/12/11 05:12
To: Squid
Subject: [squid-users] Howto Allow 1 and block another
I am trying to setup squid to allow one
Hello there,
My ISP is running squid with wccp version 1. I have monitored my switch port
which is connected with squid
Box and this port is uses 7mbps on an average. My squid box consumed full
memory and finally hanged.
Is there any configuration in squid regarding memory utilization?
Thanks. That did the trick. Whats the diff between the /24 and /32 ?
On Sun, 2005-12-11 at 06:35 +0200, Pieter De Wit wrote:
Hey Barry,
Try this:
acl julie src 192.168.1.20/32
acl jess src 192.168.1.12/32
HTH,
Pieter
-Original Message-
From: Barry Rumsey [mailto:[EMAIL
It's the subnet mask. 32 means 255.255.255.255, which is a specific IP.
24 is a full network. Read up on subnetting if you want to understand
it better.
Barry Rumsey wrote:
Thanks. That did the trick. Whats the diff between the /24 and /32 ?
On Sun, 2005-12-11 at 06:35 +0200, Pieter De
16 matches
Mail list logo