Hi Henrik,
Using the same steps I'm getting the error below during starting up the
squid in debug mode:
-Start of message-
2007/03/14 09:45:43| aclParseAclLine: Invalid ACL type 'myaddr'
FATAL: Bungled squid.conf line 2822: acl interface1 myaddr x.x.x.79
Squid Cache
Hi Alexandre,
I want to use All the IP addresses .. but for each time getting the correct
reply for the IP I'm use.
So, if I used the x.x.x.x I get a reply for x.x.x.x and if I used the
y.y.y.y I get the reply for y.y.y.y and so on ..
What I'm getting now is: x.x.x.x using any IP address,
ons 2007-03-14 klockan 09:50 +0200 skrev Alaa Ayad - InternetVSAT.com:
Hi Henrik,
Using the same steps I'm getting the error below during starting up the
squid in debug mode:
-Start of message-
2007/03/14 09:45:43| aclParseAclLine: Invalid ACL type 'myaddr'
Sorry,
ons 2007-03-14 klockan 10:08 +0200 skrev Alaa Ayad - InternetVSAT.com:
I hope that it is clear now .. as I rely confused why it is giving a reply
for one IP in the server even if I used the other IP addresses.
reply for one IP in what sense?
Regards
Henrik
signature.asc
Description: Detta
Are you sure your outgoing traffic is using y.y.y.y and z.z.z.z when you
expect it to?
Did you check your traffic with tcpdump or alike?
Bye
Bgs
Alaa Ayad - InternetVSAT.com wrote:
Hi Alexandre,
I want to use All the IP addresses .. but for each time getting the
correct reply for the IP
Thanks Henrik,
Changed the helper to concurrency 0 and the 302 is now working.
Only issue now is that the Location value is empty.
However, when I test my script from the dos prompt in squid/sbin I see the
floowing response from my script onto the cmd line
302:http://www.fancygear.co.uk
Any
Dears Henrik Bags,
I'm checking the IP address that I'm using in Browser settings by visiting
this website:
http://www.whatismyip.com
Hanrik, After changing the myaddr by myip it is working, but it is not
giving the correct address all the time .. :S
I have to refresh the site more than 5
Chris, look it.. i have no ACL just one
acl network src 192.168.2.0/255.255.255.0
http_access allow network
All works good but only one site doesnt work.. the site is from Brazil
www.uol.com.br but is the users area and must have username and
password...
If i dont use proxy like a ie direct
How do I force a specific URL to always be fetched from the Squid (2.6S10)
cache?
Thanks.
ons 2007-03-14 klockan 13:24 +0200 skrev [EMAIL PROTECTED]:
I'm checking the IP address that I'm using in Browser settings by visiting
this website:
http://www.whatismyip.com
Hanrik, After changing the myaddr by myip it is working, but it is not
giving the correct address all the time ..
ons 2007-03-14 klockan 11:01 +0100 skrev WRIGHT Alan:
Thanks Henrik,
Changed the helper to concurrency 0 and the 302 is now working.
Only issue now is that the Location value is empty.
You mean that Squid is sending a 302 redirect with an empty Location:
header? Should not happen, and does
Thanks Alot Henrik, it is working fine now .. you are the Boss.
Also BIG thanks for Bgs Alexandre Correa.
Best Regards,
Aldalil
ons 2007-03-14 klockan 13:24 +0200 skrev [EMAIL PROTECTED]:
I'm checking the IP address that I'm using in Browser settings by
visiting
this website:
tis 2007-03-13 klockan 22:02 +0600 skrev Dmitry Hazin:
I suspect that ncsa_auth process is not being started (btw, should it
be in the process list when squid is running?)
It should be in the process list indeed..
What child processes of Squid do you see in the process listing?
2007/03/13
tis 2007-03-13 klockan 11:57 +0800 skrev Adrian Chadd:
Are ECN/Window Scaling options which can be fiddled via syscalls per
socket FD?
Probably not for ECN, but it looks like the window scaling can be
influenced by the TCP_WINDOW_CLAMP setsockopt.
Adding a TCP setsockopt for turning off ECN
ons 2007-03-14 klockan 18:24 +0600 skrev Dmitry Hazin:
Squid processes are only:
root 18128 0.0 0.4 4168 1224 ?Ss 18:18 0:00
/usr/sbin/squid -D -sYC
proxy18131 0.0 1.8 7080 4664 ?S18:18 0:00 (squid) -D -sYC
proxy18132 0.0 0.5 4376 1392 ?R
Hello, All!
I have squid 2.6.10 installed from port on freebsd 6.2 and a problem.
When a client downloads some big file, the download process stops in 1
minute. It looks like IE finishes downloading, but file size on disk is
less then actual size. This problem appeared after I had upgraded
I am having problems getting through to Hotmail. It seems to happen only
when squid is being used as transparent. When I configure browsers to go
through the proxy directly, everything works great.
It is Squid 2.6.STABLE9 (from source).
It just hangs then times out on the following URLs:
Mozilla
tis 2007-03-13 klockan 14:18 -0400 skrev Martin Kobele:
Hi,
yes, we use wccp 1.7 as well.
Do you have your GRE tunnel set up?
You can't mix ip_wccp and ip_gre. The kernel can only support one GRE
implementation at a time. If you load both only one will be used
(probably the last loaded, but
All I do is this:
modprobe ip_wccp
iptunnel add gre1 remote RouterIP local LocalIP dev eth0
ifconfig gre1 127.0.0.2 up
I do not load ip_gre.
Martin
On Wednesday 14 March 2007 10:44, Awie wrote:
tis 2007-03-13 klockan 14:18 -0400 skrev Martin Kobele:
Hi,
yes, we use wccp 1.7 as well.
Exactly, however, I have checked my script and it seems to run slightly
differently from running the script at the cmd prompt.
I think it may have something to do with the way the helper script is
called by quid and seems to run with c:\squid\sbin\ as the running
directory.
Here is the script:
On 3/14/07, Henrik Nordstrom [EMAIL PROTECTED] wrote:
The window scaling problem is unfortunately not so easy to detect in
Squid as it causes connections to hang after the request has been sent
and acknowledged making it just look like the server takes ages to
process the request, so it
ons 2007-03-14 klockan 10:47 -0400 skrev Martin Kobele:
All I do is this:
modprobe ip_wccp
iptunnel add gre1 remote RouterIP local LocalIP dev eth0
ifconfig gre1 127.0.0.2 up
I do not load ip_gre.
If the iptunnel command succeeds you have ip_gre loaded, perhaps
statically, or if not
ons 2007-03-14 klockan 11:33 -0400 skrev Chris Nighswonger:
I notice that the window may be scaled many times during the course of
packet exchanges.
No, the window scaling is selected during the SYN handshake only. The
window size may change, but not the scale.
I also noticed that the size
Thanks a lot, Suman! This patch solved my problem!
-Original Message-
From: Suman Mukherjee [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 14, 2007 4:47 PM
To: Mikhail Pykhov
Cc: [EMAIL PROTECTED]
Subject: RE: [squid-users] Squid drops connection after a minute
Hi Mikhail
Hope
ons 2007-02-21 klockan 16:00 + skrev Suman Mukherjee:
In Squid 2.6.STABLE9 I have faced a problem.
While downloading a big file, squid is getting timeout.
I cannot reproduce this..
Reason:
There are two socket connections.
1. Accepted request from client side.
2. Read data from file
Hi Henrik
Thank you for the clarification.
I have used the following icap patch:
http://devel.squid-cache.org/cgi-bin/diff2/icap-2_6
The patch has removed that line.
Would you please let me know whether this patch is safe enough or not
WITH the line in client_side.c?
Regards
Suman
Henrik,
Have you had a chance to look at the file I sent you a few days ago? It
looks like the mem_node is growing and never stops. I've searched the
archives and found others with the problem but no solution. Right now
I'm restarting squid every other day to clean it up and keep from
running
On 3/14/07, Fabio Silva [EMAIL PROTECTED] wrote:
Chris, look it.. i have no ACL just one
acl network src 192.168.2.0/255.255.255.0
http_access allow network
All works good but only one site doesnt work.. the site is from Brazil
www.uol.com.br but is the users area and must have username and
I have been using squid-cache at home on my firewall for years now, I
use it for the normal standard old stuff of simply caching of where we
surf.
I am writing a new kiosk based software package that has a GUI app as
the front end for the operator and apache is serving up the pages to
the web
Hello,
I'm in bit of a dilemma here. I have the mail server inside the
firewall and it redirects all incoming traffic (webmail) on port 80 to
443. Hence any internal user trying to access the webmail will be
redirected to https:..xxx.iii.com
I'm using Squid 2.5 (on Suse Enterprise Server
Hi,
Looking into solution on reducing squid mem use. I have 32bit squid
and 64bit squid running; but I'm quickly running out of RAM again.
32bit squid on linux 64bit kernel, aufs: ~115 bytes / obj
64bit squid; aufs, linux: ~165 bytes / obj
So, a 32bit squid w/ 4G of RAM can actually store
Hi,
We have a need to force users to re-authenticate to the Web
periodically. Squid doesn't support this, because of how the browser
caches credentials. So I'm having our external Radius auth helper
handle this for us. As this seems to be a FAQ, I'm sharing the script
here.
Hi everybody,
I have squid 2.6 stable10 on microsoft windows 2000 server,
to share internet conection. The http protocol work well but ftp dont work.
On client PC, with PING command i cant find the IP of the external ftp host,
instead, on server 2000, with PING command i can find the IP of the
mån 2007-03-12 klockan 17:33 -0400 skrev Dave Rhodes:
Henrik,
The Squid proc continues to grow. I ran the memory monitor between 1.5
and 1.7GB. Hopefully that's enough.
Let me know if you see anything interesting in there or if there is
something specific I can look for.
Lots of things
Henrik,
The HTTP 1.1 patch is applied and it's 2.6 stable5. The only odd thing is that
I am running IWSS on the same server.
Here are the squid.conf entries:
cache_peer 127.0.0.1 parent 8080 0 no-query default
acl our_networks src 10.0.0.0/8
acl numconn maxconn 100
http_access deny
ons 2007-03-14 klockan 17:20 -0400 skrev Dave Rhodes:
Henrik,
The HTTP 1.1 patch is applied and it's 2.6 stable5. The only odd thing is
that I am running IWSS on the same server.
Ok. That explains a lot. Early http11 patches had some problems,
including a very noticeable FwdState leak...
Hi,
At 19.49 14/03/2007, leongmzlist wrote:
Hi,
Looking into solution on reducing squid mem use. I have 32bit squid
and 64bit squid running; but I'm quickly running out of RAM again.
32bit squid on linux 64bit kernel, aufs: ~115 bytes / obj
64bit squid; aufs, linux: ~165 bytes / obj
So, a
Hi,
I have the following on my config:
cache_dir coss /data/logs/squid_data/squid_coss.bin 9216
block-size=8192 max-size=32768 membufs=128
cache_dir aufs /data/logs/squid_data/squid-large-files 20480 20 256
cache_swap_log /data/logs/squid_data/%s
All the files smaller than 32K are supposed
OK Henrik, thanks. I just finished the upgrade to the daily release. I
hope that one didn't need the patch?
I'll let you know how it goes.
Thanks again,
Dave
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 14, 2007 6:09 PM
To: Dave Rhodes
Cc:
ons 2007-03-14 klockan 19:27 -0400 skrev Dave Rhodes:
OK Henrik, thanks. I just finished the upgrade to the daily release. I
hope that one didn't need the patch?
The daily naturally includes the patch.
Regards
Henrik
signature.asc
Description: Detta är en digitalt signerad meddelandedel
Dave wrote:
Hello,
I've updated from squid 2.5 to 2.6 on a FreeBSD box using ports.
I'm using squid as a transparent proxy and this is working fine. My
problem is my spam, spyware and pornography rejections are no longer
working and i copied those files and config lines directly from a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 14 Mar 2007 15:12:56 -0700
leongmzlist [EMAIL PROTECTED] wrote:
Hi,
I have the following on my config:
cache_dir coss /data/logs/squid_data/squid_coss.bin 9216
block-size=8192 max-size=32768 membufs=128
cache_dir aufs
42 matches
Mail list logo