--- Ow Mun Heng [EMAIL PROTECTED] wrote:
On Tue, 2004-11-30 at 12:36, Bin Liu wrote:
If you want failover load balance, WCCP is
strongly recommended.
I'll have to read up more on WCCP, which was
previously a cisco
proprietry code or algo or something.
if you want to load-balance and
The amount of RAM used by squid depends on your
cache size and objects
in transit. The larger the cache, the more ram will
be used by squid.
Yes right other thing that you can do to increase
cache_mem size so squid i will take more hot objects
in its memory .it will also improve performance.
Dear all
squid takes 99.9 % most of time my squid boz is as
follows:
Dual Pentitum III 1200 Mhz Processor
Entry Level Server Motherboard
2 GB RAM
3 SCSI Drives One for OS other 2 for cache
cache_dir 2GB only
async-io 50 threads
OS Redhat 9 with wccp v1 patched
load:
Peak 130 Request/Sec
Avg 90
We have 1300Pcs Connected in the network.
Aproxymaterly 2 request/per pc.
We will get 1300*2-2600 / per second
Still i think 2600 / per second still impossible to
handled by single squid box i think your machine will
go crazy with so many requests i have 4 cache boxes
each
Our squid box scales upto 280 req/sec. Probably, it
will scale little
more.. but not sure. I am not sure how squid can
scale upto 2600
req/sec.
Can you share what hardware and OS you are using any
tuning which you have done . it will be helpful
Regards
UX
i have also IOS 12.3 it is normal to see Web Cache ID
0.0.0.0 same here
checkout out cache ip through this command
show ip wccp web-cache view
also check out iptables are correctly implemented
through this command on linux
iptables -t nat -L
there is only wccp_router setting in
check out squidguard blacklists
http://www.squidguard.org/download/
--- Kashif Ali Bukhari [EMAIL PROTECTED] wrote:
can any body send me a pron filter file wich
listed all sex sites
--
Syed Kashif Ali
+923004295604
MSN:- [EMAIL PROTECTED]
11-B Toheed Park Gulshen-e-Ravi
Dear all
Should i have to get better processor .
Current Processor
Pentium 3 1200 Mhz
squid cache_dir 2.0 Gb
current req/sec: 110
here is some commands output
[EMAIL PROTECTED] root]# vmstat
procs memory
swap io system
cpu
r b w swpd
I need at least 2 confirmed persons intending to
attend this Squid BOF
session at the Linux Kongress to prepare the
session.
So far it has been very silent which either means
that there is no Squid
Users attending the Linux Kongress, or that there is
no interest to
discuss what the
hi all..
still having some problems getting my WCCP running
for
my cache box..
do you get matches in access-list in router which is
used to wccp . isiptables is configured properly ?
i hope this helps
Regards
UX
___
Do you Yahoo!?
hi all..
still having some problems getting my WCCP running
for
my cache box..
do you get matches in access-list in router which is
used to wccp . is iptables is configured properly ?
i hope this helps
Regards
UX
__
Do you
--- Mark Tinka [EMAIL PROTECTED] wrote:
--- unixware [EMAIL PROTECTED] wrote:
do you get matches in access-list in router which
is
used to wccp .
which access-lists are these...?.. i only have an
ACL
that i use to deny redirection of some hosts, such
as
my web server e.t.c
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Wed, 1 Sep 2004, Henrik Nordstrom wrote:
then
depmod ip_wccp
to load the module.
Err.. I meant modprobe ip_wccp
Thanks Henrik for your guidance and help
Regards
UX
___
Do you
Hi everybody,
Download the entire package:
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz
It includes a Makefile that should allow you to
build on kernel 2.6.X
These steps work for Redhat Fedora Core which i use
without compiling the whole kernel .
1. install the
Dear Sir Henrik
When will squid-3.0 stable will be released.
using epoll how many times will it run faster than
squid-2.5 .we will thankful if you release it early.
Regards
UX
__
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB
and (patch ) compile Fedora 2 kernel-2.6.5-1.358
with the given below
command and it generates many errors and warning.
these gcc lines wont work on kernel 2.6 here the way
which Henrik have suggested
A quick investigation of Linux-2.6 build model showed
that the
following
simple procedure
make[1]: *** [/usr/src/ip_wccp/ip_wccp.o] Error 1
make: *** [/usr/src/ip_wccp] Error 2
as far i know . do you have kernel source installed ?
___
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
acl NOCACHE dst my.ip.here
and later:
http_access deny NOCACHE
here is correct way of doing it
The first step is to define an ACL for the local
servers. You might want to use an address-based ACL,
such as dst:
acl LocalServers dst 172.17.1.0/24
If the servers don't live on a single
Dear all
my squid performance is slugglish due to High CPU
usage . sometime squid take 99.9 cpu usage in top
command output.
My server spec as follow:
Pentitum III 1200 Mhz (on intel Server Board)
2 GB RAM
2 SCSI Disk ( 4 GB cache dir )
OS Redhat 9
squid configuration option async-io
Since we've had to take the proxy offline for now,
I'll try doing a
fresh install of a decent server level distro
(Slackware probably)
and run some rigorous tests on the hardware.
try to find out where is bottleneck .
1) are you using 32 GB for cache_dir this too much big
my. try to 8 to
Dear all
i want monitor squid box performance here is commands
i guess most critical to watch .
1) top ( look at squid is not taking too much CPU )
2) vmstat ( make sure machine is not swaping too
much)
or
2) free -m
3) iostat -x (look for await , svctime
4) uptime (load average is not
FATAL: Module ip_wccp not found.
module is automatically copied to
/lib/modules/2.6.5-1.358custom/extra/ip_wccp.ko
and what kernel are you currently running?
You MUST compile and run your own kernel to build
third-party modules in a
sane manner.
i am using default kernel the
rm /lib/modules/2.6.5-1.358/net/ipv4/ip_wccp.ko
depmod -a
and try again.
put manual entry in
/lib/modules/2.6.5-1.358/modules.dep which i have
removed now
still i cant load a ip_wccp successfully i am doing
following this steps
1) put ip_wccp.c /root directory make Makefile with
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Tue, 22 Jun 2004, unixware wrote:
Thanks for your reply . it good to see you again in
mailinglist.
i follow the steps you mentioned when issuing
modprobe ip_wccp .but i get this errors
FATAL: Error inserting ip_wccp
(/lib/modules/2.6.5-1.358
Has anybody switched from a 2.4 kernel to a 2.6
kernel? Do you really see a
performance boost in squid?
according to this article 6 times performance
improvement in Web serving
http://www-106.ibm.com/developerworks/linux/library/l-web26/
Regards
UX
Dear all
i want to patch Fedora 2 kernel with wccp v 1 support
i download the module at
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp.c
but i dont know correct GCC lines to compile as in
kerenl 2.6.5 lines has been location changed .
anyone patched FC 2 successfully
Regards
UW
Dear all
i have to calculate how much bandwidth is saved by
squid the value Mbps
which tool should i use ??
Regards
UW
__
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
Thanks Steve for valuable explaination
next i will try build kernel with icc8
i think this will improve further performance
One more thing. When building Squid with ICC
you'll
see a lot of these:
icc: Command line remark: option '-MP' not
supported
Yes u r right i see this
Dear all
i have installed Intel C++ compiler but squid-3 is not
picking this up i move the gcc from path .
i installed in /opt/intel_cc_80/ and its in path
will squid 2.5 code will work for this compiler ??
boz its in c .
[EMAIL PROTECTED] squid-3.0-PRE3-20040516]# ./configure
checking for a
i have installed Intel C++ compiler but squid-3 is
not
picking this up i move the gcc from path .
try :
./configure your options here
CC=/path/to/intel-C-compiler
CXX=/path/to/intel-C++-compiler
i can able to run ./configure successfully but running
make giving the following error
Yes, ICC (both 7.1 and 8.0) will build Squid v2.5Sx.
I'll mail you the squid.spec file (I'm building for
a Red Hat environment) if you want, but it really
comes down to only 2 steps.
1. Run the script to set the ICC environment
variables:
/usr/local/intel/compiler/bin/iccvars.sh
Dear all
i am using squid on Redhat in transparent mode
will switching to gentoo linux will improve
performance boz its compiles from source
any suggestion and ideas
i have following request ratio :
client_http.requests = 78.348406/sec
Connection information for squid:
Number of clients
Dear all
i am using squid on Redhat in transparent mode
will switching to gentoo linux will improve
performance boz its compiles from source
any suggestion and ideas
i have following request ratio :
client_http.requests = 78.348406/sec
Connection information for squid:
Number of clients
diskHandleWrite: FD 8: disk write error: (28) No
space
left on device
what is location of swap.state file
i think your patition or hard drive is getting full
Regards
I have here a Netra-machine with Solaris 8 and 1GB
RAM. This machine is
serving as mailhost/mailscan-machine and
checking for gcc... no
checking for cc... no
there is no c compiler installed on or system or may
be it is installed but not in your PATH
install gcc if it not installed
Regards
Ooops sorry i send this email again because i
write wrong subject.
Dear all,
I'am newbie
Dear Raymond
unfortunately as i was reading your mail my squid as
died with same error :( . i was also running
Squid-2.5-StABLE5
i downgrade to old tar source on system which was
squid-2.5-Stable2 it is running ok after that .
what was your cpu usage for squid ?
Regards
I have a Dual
What are your configure and compile options? What
kind of machine is it
running on?
Pentitum III 1200 Mhz Intel Entry Level Server Board
2 GB RAM
3 SCSI drive ( ReiserFS )
Redhat 7.3
linux kernel 2.4.25
gcc 2.96
CFLAGS -O3 -march=i686 -funroll-loops
-fomit-frame-pointer
squid compiled
I saw earlier in this thread that -O6 was used.
Using any -O level above
-O2 is generally not advisable as there very often
lurks compiler bugs at
those higher levels, and it is in addition not
expected higher -O levels
will give any better performance of Squid. Over the
years there has
Dear all
i have 4 squid proxy farm . what is recommended
sibling relationship ?
suppose cache 1 is sibing of cache2
and vice versa will it create a loop ...
Thanks and Regards
./UW
__
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6
Download squid source code from
http://www.squid-cache.org/Versions/v2/2.5/
see INSTALL file for installation
see QUICKSTART for minimal configuration in source
code directory
Regards
I wanne setup my proxy but i have no idea how to and
so , could some one
please help me out. I am
see the cache_peer_domain directive in squid.conf
Regards
I have a list of URL in a text file, when a client
request any URL from
the list, the request should be forwarded to a
specific cache_peer
(parent).
How?
Sadiq
I'm trying to configure squid to not cache a
specific site. According to Section 4.20 of the
FAQ, I should use:
acl SomeSite dstdomain .somesite.com
no_cache deny SomeSite
Yes this sytax is correct
you can also use
always_direct allow SomeSite
Regards
Is this correct?
--- Elsen Marc [EMAIL PROTECTED] wrote:
I'm trying to configure squid to not cache a
specific site. According to Section 4.20 of the
FAQ, I should use:
acl SomeSite dstdomain .somesite.com
no_cache deny SomeSite
Yes this sytax is correct
you can also use
try using
half_closed_clients off
try disabling access.log
cache_access_log /dev/null
Regards
Hello all,
I've tried to use squid -k debug to check why
the CPU goes about 100%
(97-98%) and I've found this:
2004/04/20 14:34:52| Starting Squid Cache version
2.4.STABLE6 for
Wrong mailing list!!
Oh my God I'm so terribly sorry :(
no prob i will interested if u run some benchmarking
tool like dbench or some other .
to see throughput difference
Regards
It's the first time in 10.5 years on the Internet
that this has happened to
me...
*goes and hides
i have 4 squid proxy farm . what is recommended
sibling relationship ?
How does clients get to the cache farm?
Http Traffic Redirected through WCCP v1
Thanks and Regards
suppose cache 1 is sibing of cache2
and vice versa will it create a loop ...
Yes and no.. Squid
how can i add squid functionity in linux kernel.
is there any patch to load squid as module ?
to hook squid in linux kernel core .
No.
M.
can you explain further why isnt that possible
Thanks and Regards
__
Do
Why? Squid runs just nicely as a proces ontop of the
kernel, even in
enbedded environments.
i thought it will work more efficiently and with less
overhead .we use bandwidth manager ( ETINC ) which is
patched in linux kernel . and some stateful firewall
like checkpoint aslo intergrated in OS
Dear all
how can i add squid functionity in linux kernel.
is there any patch to load squid as module ?
to hook squid in linux kernel core .
Thanks and Regards
UW
__
Do you Yahoo!?
Yahoo! Tax Center - File online by April 15th
Dear all
have anyone tried using squid on web100 patched
machine
the site says it will improve tcp data transfers and
increase throughput.
more information at
http://www.web100.org
Thanks and Regards
__
Do you Yahoo!?
Yahoo! Tax Center - File online by
Should work fine, but I doubt it will make any
difference for Squid as it
What Internet connection do you have? If less than
about 400Mbit/s (40
MByte/s) then web100 is not of any relevance to you,
and if you have I
still doubt it is of any relevance to your Squid
servers..
i dont have
How big Internet connection do you have?
34Mbps Total
20Mbps ( 4 squid boxes proxying )
For i686: export CFLAGS=-O9 -funroll-loops
-ffast-math
-malign-double -mcpu=pentiumpro -march=pentiumpro
-fomit-frame-pointer -fno-exceptions
Is CPU a bottleneck for you? If not compiler flags
How man Mbit/s is your Squid server proxying?
20 Mbit/s ( 2 x 10 links . 2 squid boxes on each link
)
I would also make sure all log files including
swap.state is on the OS
drive, and no swap partition.
log files are on OS drive but swap.state is on cache
drive . how i can shift it to OS
How man Mbit/s is your Squid server proxying?
20 Mbit/s ( 2 x 10 links . 2 squid boxes on each
link
)
So approx 10Mbit/s per Squid then?
No other traffic on these links?
These are Recieve only Satelite links used for web
traffic only
Try downgrading to a standard Linux-2.4
a) How many requests/s? (5 min average)
65-90 req/sec
b) How many open connections? (number of
filedescriptors in use)
2500-3500 open connections
Current File descriptor in use 2800
We Provide and Interent Over Cable and Dialup Services
at peak hours around 3800 cable modems and 600
Dear all
Squid stops suddenly with FATAL: Received Segment
Violation...dying. i have 4 squid boxes running
squid-2.5Stable4 most them of dying with same problem
since yesterday . i aslo upgraded to squid-2.5-Stable5
but same problem
Other thing i have notice squid is taking too much CPU
like
Is there a way , within squid.conf, to prevent users
from reading the daily
logs generated by sarg (/var/www/html/squid) from
any client machines?
put authenticaion on your web server ( apache )
squid cannot take care of Sarg.
this may be helpful
I am looking for other cache servers in the
United States that I can
peer with. Does anyone have a list or know where I
can find any.
Thanks, Jonathan Carpenter
http://www.ircache.net Servers provide peering
facility
Regards
__
How to checked services running on a squid proxy
server? what is the
command? Is it top?
By the way, may i also know how to recognise those
important services,
software and/or applications running on a server? I
have only installed
SuSE Linux 8.0 and squid?
one way to check what services
I'm running squid as transparent proxy server for
dial-up users.
Everything seems to be ok except CPU load. With 1.5
Mbit/s (35 requests
per second) traffic through proxy, squid consumes
about 50-60% of cpu
(40-45% is system time). And with a load of 3-3.5
Mbit/s processor load
comes
I am trying to enable WCCP on Redhat 9.0 on a new
Dell Server -
Installed base Linux from Redhat 9x CDs
Installed following
Kernel 2.4.20-8smp
Apache 1.3.29
MySQL 4.0
PHP 4.3.4
Squid 2.5.STABLE4
what wccp version 1 or 2 you are trying to use
you dont need to patch squid for
:
I compiled Squid with '--enable-async-io' option,
and modify squid.conf to
operate Squid with AUFS.
But I could not see the 16(default value) squid
threads. There is only one
Squid process and its child.
firstly you should have aufs in cache_dir in
squid.conf
cache_dir aufs /cache
Dear all
i am getting following error squid.conf
My machine has following software installed
linux kernel 2.6.3 ( Redhat 9 )
squid-2.5-Stable-5 compiled with --with-pthreads
--enable-async-io
other things i see async-io are never enabled
ps -axm commands shows only 2 processes.
but cachemgr
Thanks Pauli for sharing this information.
i have aslo tried same kind of setup on Redhat
i am interested if any have run benchmarking on
(linux 2.4+squid-2.5) and (linux 2.6+epoll squid-3)
Thanks and Regards
--- Pauli Borodulin [EMAIL PROTECTED] wrote:
Hello,
I tried the latest Squid3
i am interested if any have run benchmarking on
(linux 2.4+squid-2.5) and (linux 2.6+epoll
squid-3)
because you seem have some insight with
benchmarking, can you tell me,
what tools to use (and describe a bit how to use
them, for example give
some command lines), I can run some
one way doing that purge this site in cache
http://www.squid-cache.org/Doc/FAQ/FAQ-7.html#ss7.5
Regards
--- Milind [EMAIL PROTECTED] wrote:
I had recently updated my website's first page
(index.html), the website
is hosted on my ISP's datacentre. now the problem I
am facing is if I
Maybe this will be useful regarding this subject.
http://www.geocities.com/tukapr/slbtranscache.html
i have cisco 7200 series router IOS 12.2
which seems to support ip slb commands
one thing i want to know client have give manually
proxy in their browser
did you find any performance
--- Awie [EMAIL PROTECTED] wrote:
/sbin/modprobe ip_wccp
echo 1 /proc/sys/net/ipv4/ip_forward
/sbin/iptables -t nat -A PREROUTING -i eth0 -p tcp
--dport 80 -j REDIRECT --to-port 3128
First line is load ip_wccp after every reboot
Second will enable ip forwarding
Does it be
Dear all
i want to monitor squid response time and other
parameters through command line rather than using
cachemgr.cgi
Thanks and Regards
UW
__
Do you Yahoo!?
Get better spam protection with Yahoo! Mail.
http://antispam.yahoo.com/tools
you need the following commands in /etc/rc.local
/sbin/modprobe ip_wccp
echo 1 /proc/sys/net/ipv4/ip_forward
/sbin/iptables -t nat -A PREROUTING -i eth0 -p tcp
--dport 80 -j REDIRECT --to-port 3128
First line is load ip_wccp after every reboot
Second will enable ip forwarding
Third line will
--- Elsen Marc [EMAIL PROTECTED] wrote:
I've a beautifull squid 2.5.4 server running with
gentoo.
What is 'gentoo' ?
it is favour of Linux which compiled from source
many find it very robust ..
www.gentoo.org
M.
It works really well with http and https client
servers
Thanks and Regards
Unixware
Has anyone successfully clutered squid boxes? if
so what did you use?
What kind of cluster are you looking for?
Active-Backup, Farm of proxies, Active-Active, Farm
of proxies, etc..
For Active-Backup type clustering any of the
failover clustering
See this link
http://www.squid-cache.org/Doc/FAQ/FAQ-4.html#ss4.20
Regards
--- Peter van der Does [EMAIL PROTECTED]
wrote:
Is it enough to change:
cache_dir aufs /var/cache/cacheA 1000 16 256
to
cache_dir null /tmp
to make that happen?
The FAQ talks about just proxy and no
Makefile:76: .depend: No such file or directory
mkdep -f .depend -g -I- -I./include
-I/usr/src/linux-2.6.1/include -DUNIX -D_DEBUG
./src/epoll.c
make: mkdep: Command not found
You apparently need to install mkdep (part of
makedepend) to build
lib-epoll.
Thanks for reply you are
i am having some problem compiling squid-3.0-PRE
with
epoll support .
/usr/bin/ld: cannot find -lepoll
You need to install libepoll.
http://www.xmailserver.org/linux-patches/nio-improve.html
Thanks Henrik and Yousuf for yours replies
when i trying to install epoll-lib-0.11.tar.gz
i
Dear all
i am having some problem compiling squid-3.0-PRE with
epoll support .
squid compile option using: --enable-async-io
--enable-epoll
OS: Redhat 9
kernel 2.6.1 (epoll support enable)
gcc 3.2
i am getting the following error :
make[1]: Entering directory
Thank for yr Reply
Redhat 9 default kernel can run multiple async-io
processes but when compiled kernel 2.6.1 we can
run 2
squid processes.
With NPTL you should not see the threads, only the
main processes (which
are 2) like when threads are not used.
Thanks for your reply
i
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Fri, 16 Jan 2004, unixware wrote:
asyn-io is not working i can see only 2 processes
even
machine on heavy load
This is how it should be with NPTL which is the
default threading model
of Linux-2.6 or RedHat Linux 9 or later. Not a sign
Dear all
i am having problem with squid i have the following
software installed
OS Redhat 9
kernel 2.6.1
squid-2.5-Stable4
asyn-io is not working i can see only 2 processes even
machine on heavy load
Kindly help
aslo geting this error in cache.log
ctx: exit level 0
ctx: enter level 0:
Dear all
i get following output in my access.log and my squid
seems to hang after that . restarting squid then its
works fine
Thanks
1074154225.509 0 203.81.64.2 NONE/400 2505 GET
/default.ida?X
Dear all
i recently upgrade to kernel 2.6.0 but i cant patch
with ip_wccp.c with newest kernel i think this patch
aslo need to updated
waiting for yr reply
Thanks and Regards
UW
__
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
Dear Andrea
Linux Distro . Redhat . Suse etc
All linux kernel support iptables which are required
for transparent proxy
http://www.dansguardian.org/ can be intrgrated with
squid to do content filtering
http://www.squidguard.org for url filtering
Many log anaylsis tools are availble
Dear All
i found document attached below on cisco . which
suggest to use ip wccp redirect in command
now i am using ip wccp redirect exclude in on serial
interface
and ip wccp redirect in on fast ethernet
i see page display time has improved .
any throughts and ideas
Yes Indeed thats very good news ...
and feeling good seeing both gurus and Wessel and
Henrik replies these are really helpful and
informative.
and i want to request a author will he share sample
chapter from his book in electric form if possible :)
Wish Them GOOD luck in their future.
Dear All
squid is very popular software
You people should invite for college and university
students to maintain squid site for you.
and they aslo can sponsor squid development.
or something at Govt level.
aslo there is very less information about support
contract at MARA System site . i
Thanks for yr reply
Yes you are right .
other thing i want to ask
is squid-3 is stable for production use ?
when squid-3 stable release is comming out.
is kernel 2.5 and 2.6 have builtin epoll support ?
Thanks and Regards
UW
i am thinking running squid on port 80 .so i can
skip
Thanks for yr reply and help
i accidently compiles old tar file i.e
squid-2.5.STABLE1 rather than latest one
switching to squid-2.5.STABLE4 solved my problems
Thanks and Regards
UW
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Sat, 6 Dec 2003, unixware wrote:
Dear all
my
Dear all
we are using squid as Transparent proxy with following
setup
1) Router Cisco 7200 series VXR
IOS 12.3 with WCCP v1 enabled.
2) Red Hat Linux 9 with wccpv1 patch ( 4 boxes. 2 on
each downlink )
Machine Hardware
Intel Entry level Server motherboard
Intel(R) Pentium(R) III CPU
Dear all
my squid dying with following error after evert few
hours
FATAL: Received Segment Violation...dying.
2003/12/06 19:06:12| storeDirWriteCleanLogs:
Starting...
2003/12/06 19:06:12| WARNING: Closing open FD9
2003/12/06 19:06:12| WARNING: Closing open FD 11
2003/12/06 19:06:12|
i am getting very low Request Disk Hit Ratios: 5 min
0.3% as compare to other proxies in cache farm which
are getting around 34 % disk ratio. cache manager.
is this normal ?
we are not using cache peer relationship between cache
farm .
is this recommeneded feature when used cache farm . ??
squid-3.
Regards
Henrik
On Wed, 26 Nov 2003, unixware wrote:
Dear All
Any body using Squid Net I/O Performance patch
located
at squid site
http://squid.visolve.com/developments/rtsignal_install.htm
any experience and idea ?
Regards
UW
Dear All
Any body using Squid Net I/O Performance patch located
at squid site
http://squid.visolve.com/developments/rtsignal_install.htm
any experience and idea ?
Regards
UW
__
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
Dear Thomas
let see you want run log rotation script at 3:15 AM
use crontab
any entry by using crontab -e
15 3 * * * /usr/local/squid/sbin/squid -k rotate
that will do the trick
Regards
UW
--- [EMAIL PROTECTED] wrote:
Hey folkes,
I have a question again. I want to set up a
Dear Jim
its depend on your default gateway you are using for
yr machine check with route command on linux based
systems
[EMAIL PROTECTED] root]# route
Kernel IP routing table
Destination Gateway Genmask Flags
Metric RefUse Iface
192.168.1.0*
As you bound you NIC2=2.2.2.1 ( http_port 2.2.2.1:3128
) address to squid
all client web requests will be using 2.2.2.1 header
as squid tries to get requested data from web servers.
comes back from same interface .
you dont need to run any thing more
Regards
UW
--- Andrew [EMAIL
Dear
you should aslo look for system resources used
through top,iostat.free etc
also see the squid logs for any errors
Regards
UW
--- Ricardo Jose Guevara Ochoa [EMAIL PROTECTED]
wrote:
Hi All,
The cache of my university that I work for gets slow
if i have more
than 200 active
There is tool called bonnie++ for file system
benchmarking
http://www.coker.com.au/bonnie++/
aslo there some results of benchmarking at reiserfs
site www.namesys.com
Regards
UW
--- Linda W. [EMAIL PROTECTED] wrote:
Henrik Nordstrom wrote:
On Sat, 25 Oct 2003, Linda W. wrote:
(in milliseconds) for I/O
requests issued to the device to be served. )
that mean using multiple drive aslo improve
performance .
Regards
UW
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Sat, 25 Oct 2003, unixware wrote:
how can i improve Disk I/O performance ??
What cache_dir
Dear List
we are using squid on our cache server the specs are
as follows
.Pentitum 4 Intel Server Board
.1 GB DDR Ram
.OS Red Linux 9 with wccp version 1 patch
. swap 504 MB
.using separate scsi disks for caches and OS
squid compile with aufs and snmp
squid HTTP requests per minute:
kernel
compilation needed ?
Thanks and Regards
UW
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Sat, 25 Oct 2003, unixware wrote:
i change the default cache_mem size 32 MB to 512
MB
Why?
but still there no improvement in performace i
want to take maxium
output my
100 matches
Mail list logo
